Experimental investigation of forced convective heat transfer coefficient in nanofluids of Al2O3/EG and CuO/EG in a double pipe and plate heat exchangers under turbulent flow

Nanofluid is the term applied to a suspension of solid, nanometer-sized particles in conventional fluids; the most prominent features of such fluids include enhanced heat characteristics, such as convective heat transfer coefficient, in comparison to the base fluid without considerable alterations in physical and chemical properties. In this study, nanofluids of aluminum oxide and copper oxide were prepared in ethylene glycol separately. The effect of forced convective heat transfer coefficient in turbulent flow was calculated using a double pipe and plate heat exchangers. Furthermore, we calculated the forced convective heat transfer coefficient of the nanofluids using theoretical correlations in order to compare the results with the experimental data. We also evaluated the effects of particle concentration and operating temperature on the forced convective heat transfer coefficient of the nanofluids. The findings indicate considerable enhancement in convective heat transfer coefficient of the nanofluids as compared to the base fluid, ranging from 2% to 50%. Moreover, the results indicate that with increasing nanoparticles concentration and nanofluid temperature, the convective heat transfer coefficient of nanofluid increases. Our experiments revealed that in lower temperatures, the theoretical and experimental findings coincide; however, in higher temperatures and with increased concentrations of the nanoparticles in ethylene glycol, the two set of results tend to have growing discrepancies.     

Synthesis of New LnxBi2–xSe3 (Ln: Sm3+, Eu3+, Gd3+, Tb3+) Nanomaterials and Investigation of Their Optical Properties

New Ln_xBi_2–xSe₃ (Ln: Sm³⁺, Eu³⁺, Gd³⁺, Tb³⁺) based nanomaterials were synthesized by a co‐reduction method. Powder XRD patterns indicate that the Ln_xBi_2–xSe₃ crystals (Ln = Sm³⁺, Eu³⁺, x = 0.00–0.44 and Ln = Gd³⁺, Tb³⁺, x = 0.00–0.50) are isostructural with Bi₂Se₃. The cell parameter c decreases for Ln = Eu³⁺, Gd³⁺, Tb³⁺ upon increasing the dopant content (x), while a slightly increases. Changes in lattice parameters could be related to the radii of cations. SEM images show that doping of the lanthanide ions in the lattice of Bi₂Se₃ generally results in nanoflowers. For the terbium compound two kinds of morphologies (nanoflowers and nanobelts) were observed. UV/Vis absorption and emission spectroscopy reveals mainly electronic transitions of the Ln³⁺ ions. Emission spectra show intense transitions from the excited to the ground state of Ln³⁺ and energy transfer from the Bi₂Se₃ lattice. Emission spectra of europium‐doped materials, in addition to the characteristic red emission peaks of Eu³⁺, show an intense blue emission band centered at 432 nm, originating from the 4f⁶5d¹ to 4f⁷ configuration in Eu²⁺. EPR measurements confirm the existence of Eu²⁺ in the materials. Interestingly, for all samples starting at low Ln³⁺ concentration, the emission intensity rises to a maximum at a Ln³⁺ concentration of x = 0.2 and falls again steadily to a minimum at x = 0.45.     

[Cu2(μ-(3,4,5-meo-ba)2bn)(μ-I)2]n, a new 1D polymeric copper(I) chain Synthesis, crystal structure, spectral and thermal studies

New 1D-chain copper(I) complex [Cu₂(μ-(3,4,5-MeO-ba)₂bn)(μ-I)₂] _n (1), where (3,4,5-MeO-ba)₂bn = N,N′-bis(3,4-dimethoxybenzylidene)-butane-1,4-diamine, involving a new bidentate Schiff-base containing a flexible spacer (=N–C–C–C–C–N=) has been synthesized and characterized by elemental analyses (CHN) and FT-IR spectroscopy. The crystal structure of 1 was determined from single-crystal X-ray diffraction analyses and shows the (3,4,5-MeO-ba)₂en acts as a bridging ligand with the nitrogen atoms of the two imine functions and leading to the dinuclear [Cu₂((μ-(3,4,5-MeO-ba)₂en)] groups. Such dinuclear [Cu₂((μ-(3,4,5-MeO-ba)₂en)] groups are bridged by two iodine anions [(μ-I)₂] to form a neutral 1D-chain copper(I) iodide coordination polymer. The coordination polyhedron about the copper(I) center in 1 is best described as a distorted trigonal planar. Thermogravimetric analyses reveal the thermal stability and decomposition pattern of 1.     

One Dimensional Hydrogen Bonded Arrangement in New Schiff-Base Compound (<Emphasis Type="Italic">E</Emphasis>)-2-(2,5-dimethoxybenzylideneamino)phenol (1): Synthesis,Characterization, Crystal Structure and Conformational Studies

Abstract  

New Schiff-base compound (E)-2-(2,5-dimethoxybenzylideneamino)phenol (1) was synthesized and characterized by elemental analyses, FT-IR and ¹H-NMR spectroscopy and single crystal X-ray diffraction. Molecular orbital calculation has been carried out for 1 by using HF method at 6-31G basis set. The title compound 1 crystallizes in monoclinic system, space group C2/c, with a = 19.4581(13) ?, b = 9.5805(5) Ǻ, c = 13.8431(7) Ǻ, β = 93.471(2)°, V = 2575.9(3) Ǻ³ and Z = 8. In the crystal structure two molecules are stabilized by a pair of intermolecular O1–H1···N1ⁱ hydrogen bonds. The dimeric units are further linked via C6–H6···O3ⁱⁱ hydrogen bond.     

Synthesis and characterization of new LnxSb2−xSe3 (Ln: Yb, Er) nanoflowers and their physical properties

New Ln_xSb_2−xSe₃ (Ln: Yb³⁺, Er³) based nanomaterials were synthesized by a co-reduction method. Powder XRD patterns indicate that the Ln_xSb_2−xSe₃crystals (Ln=Yb³⁺, Er³⁺, x=0.00-0.12) are isostructural with Sb₂Se₃. The cell parameters b and c decrease for Ln=Er³⁺ and Yb³⁺ upon increasing the dopant content (x), while a increases. SEM images show that doping of the lanthanide ions in the lattice of Sb₂Se₃ generally results in nanoflowers. UV-vis absorption and emission spectroscopy reveals mainly electronic transitions of the Ln³⁺ ions in case of Yb³⁺ doped nanomaterials. Emission spectra of doped materials, in addition to the characteristic red emission peaks of Sb₂Se₃, show additional emission bands centered at 955 nm, originating from the ²F_7/2→²F_5/2 transition (f-f transitions) of the Yb³⁺ ions. DSC curves indicate that Sb₂Se₃ has the highest thermal stability. The temperature dependence of the electrical resistivity of doped-Sb₂Se₃ with Yb³⁺ and Er³⁺ was studied.     

Transverse discrete breathers in unstrained graphene

The European Physical Journal B - In this paper large resistor-capacitor (RC) networks that consist of randomly distributed conductive and capacitive elements which are much larger than those...     

A novel mononuclear square-planar copper(II) complex (Pip-H+)2[CuL4]2? with 2-cyano-3-(2,5-dimethoxyphenyl)acrylic acid as ligand: synthesis, crystal structures, spectral and thermal studies

Abstract  

2-Cyano-3-(2,5-dimethoxyphenyl)acrylic acid and its novel mononuclear square-planar copper(II) complex dipiperidinium tetrakis[2-cyano-3-(2,5-dimethoxyphenyl)acrylic acid]copper(II) ((Pip-H⁺)₂[CuL₄]²⁻) were synthesized and characterized by elemental analyses, FT–IR, UV–Vis spectroscopy, and thermogravimetric analysis. Moreover, the ligand was characterized by ¹H and ¹³C NMR spectroscopy. The structures of the ligand and its copper(II) complex were confirmed by single-crystal X-ray crystallography. Whereas the ligand crystallizes in the triclinic space group Pī with unit cell parameters a = 4.6911(2) ?, b = 9.0181(4) ?, c = 13.7084(6) ?, α = 74.946(4)°, β = 87.152(4)°, γ = 89.220(4)°, V = 559.34(4) ?³, and Z = 2, the complex crystallizes in the orthorhombic space group Pccn with unit cell parameters a = 27.5486(5) ?, b = 12.9484(2) ?, c = 15.8822(3) ?, V = 5,665.34(17) ?³, and Z = 4.     

Can anion interaction accelerate transformation of cytosine tautomers? Detailed view form QTAIM analysis

The relative stabilities and noncovalent interactions of the six low-lying energy tautomers of cytosine nucleobase with some biological anions (such as F^?, Cl^?, and CN^?) have been investigated in gas phase by density functional theory (DFT) method in conjunction with 6-311++G (d,p) atomic basis set. Furthermore, to systematically investigate all possible tautomerisms from cytosine induced by proton transfer, we describe a study of structural tautomer interconversion in the gas phase and in a continuum solvent using DFT calculation. We carried out geometrical optimizations with the integral equation formalism of polarizable continuum (IEF-PCM) model to account for the solvent effect, and the results were compared with those in the gas phase. The result of calculation revealed that anions bind mostly in a bidentate manner via hydrogen bond, and stabilization energies of these complexes are larger than those in the case when anions bind in a monodentate manner. The quantum theory of atoms in molecules (QTAIM), natural bonding orbital (NBO) and energy decomposition analysis (EDA) have also been applied to understand the nature of hydrogen bond interactions in these complexes. NBO analysis reveals that the interaction patterns between the anions and the tautomers are ??-type interaction between lone pairs and $ \sigma_{{_{{{\text{N}}--{\text{H}}}} }}^{*} $ , $ \sigma_{{_{{{\text{O}}--{\text{H}}}} }}^{*} $ and $ \sigma_{{_{{{\text{H}}--{\text{F}}}} }}^{*} $ antibonding orbitals. Also, according to these theories, the interactions are found to be partially electrostatic and partially covalent. EDA results identify that these bonds have less than 35% covalent character and more than 65% electrostatic, and the covalent character increases in different anions in the order F^??>?CN^??>?Cl^?. On the other hand, orbital interaction energies of complexes of F^? anion are more than those of Cl^? and CN^? complexes. The lower orbital interaction energies in complexes of Cl^? and CN^?anions imply less charge transfer and stronger ionic bond character. Furthermore, relationship between the orbital interaction energy (E ²) with hydrogen bonding energy (E _H···X) and the electron density (??(r)) with hydrogen bonding energy of F^?, Cl^? and CN^? complexes have also been investigated.