Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

Heteropolynuclear Sodium(I) Lead(II) Complex: Crystal and Molecular Structure of a Novel 3‐D Polymer, [(en)Pb(μ3‐ONO)2Na(μ3‐ONO)2Na(μ‐O2ClO2)Na]n

A novel 3D polymeric heteropolynuclear sodium(I) lead(II) complex containing different ligands, [NaPb(ClO₄)(en)(NO₂)₂] was synthesized and characterized by elemental analysis and IR, and ¹H‐, ¹³C‐, and ²⁰⁷Pb‐NMR spectroscopy. The single‐crystal X‐ray data of [NaPb(ClO₄)(en)(NO₂)₂]_n established that the complex is a three‐dimensional polymer, [(en)Pb(μ₃‐ONO)₂Na(μ₃‐ONO)₂Na(μ‐O₂ClO₂)Na]_n. The Pb and Na atoms have four‐ and eight‐coordinate geometry, respectively. The lone pair of electrons at the Pb^II atom is ‘stereochemically active’.     

Enhancing the enzymatic hydrolysis of cellulosic materials using simultaneous ball milling

One of the limiting factors restricting the effective and efficient bioconversion of softwood-derived lignocellulosic residues is the recalcitrance of the substrate following pretreatment. Consequently, the ensuing enzymatic process requires relatively high enzyme loadings to produce monomeric carbohydrates that are readily fermentable by ethanologenic microorganisms. In an attempt to circumvent the need for larger enzyme loadings, a simultaneous physical and enzymatic hydrolysis treatment was evaluated. A ball-mill reactor was used as the digestion vessel, and the extent and rate of hydrolysis were monitored. Concurrently, enzyme adsorption profiles and the rate of conversion during the course of hydrolysis were monitored. α-Cellulose, employed as a model substrate, and SO₂-impregnated steam-exploded Douglas-fir wood chips were assessed as the cellulosic substrates. The softwood-derived substrate was further posttreated with water and hot alkaline hydrogen peroxide to remove >90% of the original lignin. Experiments at different reaction conditions were evaluated, including substrate concentration, enzyme loading, reaction volumes, and number of ball beads employed during mechanical milling. It was apparent that the best conditions for the enzymatic hydrolysis of α-cellulose were attained using a higher number of beads, while the presence of air-liquid interface did not seem to affect the rate of saccharification. Similarly, when employing the lignocellulosic substrate, up to 100% hydrolysis could be achieved with a minimum enzyme loading (10 filter paper units/g of cellulose), at lower substrate concentrations and with a greater number of reaction beads during milling. It was apparent that the combined strategy of simultaneous ball milling and enzymatic hydrolysis could improve the rate of saccharification and/or reduce the enzyme loading required to attain total hydrolysis of the carbohydrate moieties.     

Kinetics of anation of chromium(III) by L-phenylalanine

Summary The kinetics of anation of chromium(III) species, [Cr(H₂O)₆]⁴⁺ and [Cr(H₂O)₅OH]²⁺, by L-phenylalanine in aqueous acid has been studied spectrophotometrically. Effects of varying [substrate], [ligand], [H⁺], , % ethanol and temperature were investigated. The kinetic data suggest a mechanism where outersphere-associations [between chromium(III) species and phenylalanine in the zwitterionic form] precede anation. Comparison of the results with published data suggest an I_a path for the [Cr(H₂O)₆]³⁺ reaction and I_d path for the [Cr(H₂O)₅OH]²⁺ reaction.     

Tribromoisocyanuric Acid (TBCA) and Oxone®‐MX Systems as Oxidizing Agents: Oxidative Coupling of Thiols to Their Corresponding Disulfides under Mild and Heterogeneous Conditions

Tribromoisocyanuric acid (TBCA) and Oxone^®‐MX systems were used as effective oxidizing agents for the oxidation of thiols to their corresponding disulfides under mild conditions at room temperature with good to excellent yields.     

Microemulsion-based synthesis of CeO(2) powders with high surface area and high-temperature stabilities

Pure ceria powders, CeO(2), were synthesized in heptane-microemulsified aqueous solutions of CeCl(3) or Ce(NO(3))(3) stabilized by AOT (sodium bis(2-ethylhexyl) sulfosuccinate), DDAB (di-n-didodecyldimethylammonium bromide), or DDAB + Brij 35 surfactant mixtures. Micellar DTAB (n-dodecyltrimethylammonium bromide) and vesicular DDAB systems were also used as media for generating CeO(2). Characterization of the powders by X-ray powder diffractometry, laser-Raman spectroscopy, and Fourier transform infrared spectroscopy revealed that in the presence of surfactants almost-agglomerate-free nanosized crystallites (6-13 nm) of anionic vacancy-free cubic CeO(2) were produced. In the absence of surfactants 21-nm-sized crystallites were formed, comparing with the 85-nm-sized crystallites when cubic CeO(2) was created via thermal decomposition of cerium oxalate. Surface characterization, by X-ray photoelectron spectroscopy, N(2) sorptiometry, and high-resolution electron microscopy showed AOT- or (DDAB + Brij 35)-stabilized microemulsions to assist in formation of crystallites exposing surfaces of large specific areas (up to ca. 250 m(2)/g) but of low stability to high-temperature calcination (28-13 m(2)/g at 800 degrees C). In contrast, the double-chained DDAB was found to generate cubic CeO(2) crystallites of lower initial surface areas (144 (microemulsion) to 125 (vesicles) m(2)/g)) but of higher thermal stability (55-45 m(2)/g at 800 degrees C). Hence, the latter cerias could be considered as appropriate components for total oxidation (combustion) catalysts.     

Two‐Dimensional Holo‐ and Hemidirected Lead(II) Coordination Polymers: Synthetic,Spectroscopic, Thermal,and Structural Studies of [Pb(μ‐SCN)2(μ‐ebp)1.5]n and {[Pb(μ‐OAc)(μ‐ebp)](ClO4)}n (ebp=4,4′‐[(1E)‐Ethane‐1,2‐diyl]bis[pyridine]; OAc=Acetato)

Two new coordination polymers of Pb^II complexes with bridging 4,4′‐[(1E)‐ethane‐1,2‐diyl]bis[pyridine] (ebp), thiocyanato, and acetato ligands, [Pb(μ‐SCN)₂(μ‐ebp)_1.5]_n ( 1 ) and {[Pb(μ‐OAc)(μ‐ebp)](ClO₄)}_n ( 2 ), were synthesized and characterized by elemental analysis, FT‐IR, ¹H‐ and ¹³C‐NMR, thermal analysis, and single‐crystal X‐ray diffraction. In 1 , the Pb²⁺ ions are doubly bridged by both the ebp and the SCN⁻ ligands into a two‐dimensional polymeric network. The seven‐coordinate geometry around the Pb²⁺ ion in 1 is a distorted monocapped trigonal prism, in which the Pb²⁺ ions have a less‐common holodirected geometry. In 2 , the Pb²⁺ ions are bridged by AcO⁻ ligands forming linear chains, which are also further bridged by the neutral ebp ligands into a two‐dimensional polymeric framework. The Pb²⁺ ions have a five‐coordinate geometry with two N‐atoms from two ebp ligands and three O‐atoms of AcO⁻. Although ClO acts as a counter‐ion, it also makes weak interactions with the Pb²⁺ center. The arrangement of the ligands in 2 exhibits hemidirected geometry, and the coordination gap around the Pb²⁺ ion is possibly occupied by a configurationally active lone pair of electrons.     

Metal chelates of heterocyclic nitrogen-containing ketones,Part XXII. Spectroscopic studies on rhodium(III) complexes of phenyl-2-picolylketone-2-pyridyl hydrazone

Summary Mono, bis and tris complexes of rhodium(III) with phenyl-2-picolylketone-2-pyridyl hydrazone (PPKPyH) have been characterized. In every case, the imino-proton of PPKPyH shows marked acidity associated with the coordination to rhodium(III). Electronic spectra show that all complexes are octahedral. The B-values suggest a strong covalency in the metal-ligand -bond and the Dq-values indicate a medium-strong ligand field. The magnetic susceptibility indicates that PPKPyH forms low-spin complexes with rhodium(III).¹H n.m.r. spectra show that the tris(ligand) complexes arecis isomers. I.r. spectra show that the ligand is neutral or monobasic tridentate or bidentate. Far i.r. studies show that [Rh(PPKPyH)X₃] · 2 H₂O (X = Cl, Br or I) aremer isomers. The effect of pH variation on the rection products is also discussed.     

Semiquantitative determination of aromatic andα,β-unsaturated aldehydes by circular thin-layer chromatography

Summary A method for semiquantitative determination of aromatic and,-unsaturated aldehydes such as salicylaldehyde, anisaldehyde, vanillin, veratraldehyde, piperonal, cinnamaldehyde, furfural andp-dimethylaminobenzaldehyde by making circular spots of their isonicotinoyl hydrazones on chromatoplates with circular thin-layer Chromatographic apparatus and their comparison with sensitivity standards has been described. The accuracy is ± 5% and the method is rapid, simple and economical.

---

Zusammenfassung Ein Verfahren zur semiquantitativen Bestimmung aromatischer und,-ungesättigter Aldehyde wie Salioylaldehyd, Anisaldehyd, Vanillin, Veratrumaldehyd, Piperonal, Zimtaldehyd, Furfural und p-Dimethylaminobenzaldehyd durch Dünnschicht-Ringchromatographie ihrer Isonikotinsäurehydrazone und Vergleich mit Standardchromatogrammen wurde beschrieben. Die Genauigkeit beträgt ±5%.