Dynamic Covalent Identification of an Efficient Heparin Ligand

Despite heparin being the most widely used macromolecular drug, the design of small‐molecule ligands to modulate its effects has been hampered by the structural properties of this polyanionic polysaccharide. Now a dynamic covalent selection approach is used to identify a new ligand for heparin, assembled from extremely simple building blocks. The amplified molecule strongly binds to heparin (K_D in the low μm range, ITC) by a combination of electrostatic, hydrogen bonding, and CH–π interactions as shown by NMR and molecular modeling. Moreover, this ligand reverts the inhibitory effect of heparin within an enzymatic cascade reaction related to blood coagulation. This study demonstrates the power of dynamic covalent chemistry for the discovery of new modulators of biologically relevant glycosaminoglycans.     

The reaction of β-aminoenones with substituted acetonitriles. Regiospecific synthesis of 2(1H)-pyridones

Unsymmetrically substituted β-aminoenones react with malononitrile, cyanomethylphenylsulfone, benzoyl-acetonitrile and ethyl cyanoacetate, in very mild conditions, to yield regiospecifically 3-functionalized 2(1H)-pyridones in high yields.     

1H-1H scalar coupling across two stacked aromatic rings: DFT calculations and experimental proof

1H-1H scalar coupling across two stacked (parallel and eclipsed) aromatic rings has been revealed through the 1D and 2D 1H NMR analysis of a [2,2]paracyclophane and rationalized by means of density functional theory (DFT) calculation of the J values.     

Ferrocene-based heteroditopic receptors displaying high selectivity toward lead and mercury metal cations through different channels

The synthesis and electrochemical, optical, and ion-sensing properties of ferrocene-imidazophenazine dyads are presented. Dyad 4 behaves as a highly selective chemosensor molecule for Pb(2+) cations in CH(3)-CN/H(2)O (9:1). The emission spectrum (λ(exc) = 317 nm) undergoes an important chelation-enhanced fluorescence effect (CHEF = 47) in the presence of Pb(2+) cations, a new low-energy band appeared at 502 nm, in its UV/vis spectrun, and the oxidation redox peak is anodically shifted (ΔE(1/2) = 230 mV). The presence of Hg(2+) cations also induced a perturbation of the redox potencial although in less extension than those found with Pb(2+) cations. Dyad 7, bearing two fused pyridine rings, has shown its ability for sensing Hg(2+) cations selectively through three channels: electrochemical, optical, and fluorescent; the oxidation redox peak is anodically shifted (ΔE(1/2) = 200 mV), a new low-energy band of the absorption spectrum appeared at 485 nm, and the emission spectrum (λ(exc) = 340 nm) is red-shifted by 32 nm accompanied by a remarkable chelation-enhanced fluorescent effect (CHEF = 165). Linear sweep voltammetry revealed that Cu(2+) cations induced oxidation of the ferrocene unit in both dyads. (1)H NMR studies have been carried out to obtain information about the molecular sites which are involved in the binding process.     

Complexes of Al(III) with d-gluconic acid

The complexation of Al(III) with d-gluconic acid was studied in solution by means of pH-potentiometry, ESI mass spectrometry and one- and two-dimensional NMR spectroscopy. Six complexes were found to form in solution from pH 2 to 10: [AlL]²⁺, [AlLH₋₁]⁺, [AlLH₋₂], [AlLH₋₃]⁻, [AlL₂H₋₁] and [AlL₂H₋₂]⁻. NMR spectroscopy indicated very complicated chemical exchange processes between the free ligand and gluconic acid molecules bound in the metal complexes, with different coordination modes resulting in changes both of the chemical shift and of the line shape of the signals. A solid complex [AlL₂H₋₁] · 2H₂O was isolated as a microcrystalline powder and characterized. The structures of the complexes are discussed on the basis of the spectroscopic results and MM force field calculations.     

Solid state coordination chemistry of copper(II)/α-hydroxycarboxylato/2,2′-bipyridine systems

Four new two-ligand complexes of copper(II) with 2,2′-bipyridine and one of three different α-hydroxycarboxylic acids (lactic, H₂LACO; 2-methyllactic, H₂MLACO; and mandelic, H₂MANO) were prepared. Complexes 1–3 of general formula [Cu(HL)₂(bipy)]·nH₂O (HL=monodeprotonated acid), were characterized by elemental analysis, IR, electronic and EPR spectroscopy, magnetic measurements and thermogravimetric analysis. Complexes 1 (HL=HLACO, n=2), 2 (HL=HMLACO, n=1) and 3a (the result of attempted recrystallization of 3, of formula [Cu(HMANO)(bipy)₂](HMANO)·H₂MANO·CH₃CN were studied by X-ray diffractometry. The copper atom is in an elongated, tetragonally distorted octahedral environment in 1 and 2 and in 3a has a coordination polyhedron intermediate between a square pyramid and a trigonal bipyramid, as evaluated in terms of the parameter τ. In 1 and 2 the α-hydroxycarboxylato ligand is bidentate and monoanionic but in 3a there are three forms: a monodentate monoanion, a monoanionic counterion, and a neutral molecule.     

Evaluation of the degree of cross-linking of cellulose-based superabsorbent hydrogels: a comparison between different techniques

Three different techniques have been applied to the evaluation of the degree of cross-linking of superabsorbent cellulose-based hydrogels obtained from water solutions of carboxymethylcellulose sodium salt (CMCNa) and hydroxyethylcellulose (HEC), chemically cross-linked with divinyl sulfone. These polyelectrolyte hydrogels are biodegradable and have the same sorption capacity as acrylate-based superabsorbents on the market. A ¹³C solid state NMR analysis was carried out on dry samples of hydrogel to obtain the degree of cross-linking, an important parameter that affects the swelling and mechanical properties of a hydrogel. Dynamic mechanical analysis was performed during the hydrogel cross-linking using a parallel plate rheometer under oscillatory deformations in order to monitor the evolution of the hydrogel viscoelastic properties during the synthesis. The value of |G*| and the slope of the stress-deformation ratio plots from uniaxial compression tests were used to evaluate the elastically effective degree of cross-linking according to classical rubber elasticity theory. Moreover, a dynamic mechanical analysis was carried out on cross-linked hydrogels at different degrees of swelling in order to investigate the influence of the swelling on the mechanical properties and the application of rubber elasticity theory to swollen hydrogels.     

pH‐Dependent Chloride Transport by Pseudopeptidic Cages for the Selective Killing of Cancer Cells in Acidic Microenvironments

Acidic microenvironments in solid tumors are a hallmark of cancer. Inspired by that, we designed a family of pseudopeptidic cage‐like anionophores displaying pH‐dependent activity. When protonated, they efficiently bind chloride anions. They also transport chloride through lipid bilayers, with their anionophoric properties improving at acidic pH, suggesting an H⁺/Cl^? symport mechanism. NMR studies in DPC micelles demonstrate that the cages bind chloride within the lipid phase. The chloride affinity and the chloride‐exchange rate with the aqueous bulk solution are improved when the pH is lowered. This increases cytotoxicity towards lung adenocarcinoma cells at the pH of the microenvironment of a solid tumor. These properties depend on the nature of the amino‐acid side chains of the cages, which modulate their lipophilicity and interactions with the cell membrane. This paves the way towards using pH as a parameter to control the selectivity of cytotoxic ionophores as anticancer drugs.     

Selective Separation of Oxy-PAH from n-Alkanes and PAH in Complex Organic Mixtures Extracted from Airborne PM2.5

A fast and simple fractionation method was optimized to selectively separate oxy-PAH from polycyclic aromatic hydrocarbons (PAH) and n-alkanes contained in solvent extracted organic matter (SEOM) from atmospheric particles with an aerodynamic diameter ≤2.5 μm (PM_2.5). Samples were collected in Mexico City. Multivariate parameters were adjusted on a standard mixture, and on SEOM spiked with pure standard mixture solutions: type and amount of phase; packing densities; type, proportion and amount of solvents, and elution flow rates were tested under several elution schemes. Cyanopropylsilyl-bonded phase material was the selected stationary phase. The separation method was applied to real samples of SEOM (2.6, 5.6 and 8.5 mg) spiked with n-alkanes, PAH and oxy-PAH. n-Alkanes overlapped with PAH due to an excess of n-alkanes in real samples overloading the capacity of the stationary phase. Oxy-PAH was separated totally from n-alkanes and PAH. Mean recoveries ± confidence intervals (95%) for n-alkanes ranged from 53 ± 17% (n-tetracontane) to 101 ± 11% (n-hexacosane); for PAH from 58 ± 5% (phenanthrene) to 85 ± 9% (benzo[k]fluoranthene); and for oxy-PAH from 68 ± 12% (9,10-dihydrobenzo[a]pyren-7(8H)one) to 108 ± 9% (1,2-benzopyrone). This method is an efficient fractionation procedure to be applied to oxy-PAH, PAH and n-alkanes in complex organic mixtures extracted from PM_2.5.