Liquid phase deposition synthesis of hexagonal molybdenum trioxide thin films

Hexagonal molybdenum trioxide thin films with good crystallinity and high purity have been fabricated by the liquid phase deposition (LPD) technique using molybdic acid (H₂MoO₄) dissolved in 2.82% hydrofluoric acid (HF) and H₃BO₃ as precursors. The crystal was found to belong to a hexagonal hydrate system MoO₃.nH₂O (n~0.56). The unit cell lattice parameters are a=10.651 Å, c=3.725 Å and V=365.997 Å³. Scanning electron microscope (SEM) images of the as-deposited samples showed well-shaped hexagonal rods nuclei that grew and where the amount increased with increase in reaction time. X-ray photon electron spectroscopy (XPS) spectra showed a Gaussian shape of the doublet of Mo 3d core level, indicating the presence of Mo⁶⁺ oxidation state in the deposited films. The deposited films exhibited an electrochromic behavior by lithium intercalation and deintercalation, which resulted in coloration and bleaching of the film. Upon dehydration at about 450 °C, the hexagonal MoO₃.nH₂O was transformed into the thermodynamically stable orthorhombic phase.     

Chemical composition and antibacterial activity of the essential oil of Espeletia nana

The essential oil of the leaves of Espeletia nana Cuatrec., obtained by hydrodistillation, was analyzed by GC-MS, which allowed the identification of 24 components, which made up 99.9% of the oil. The most abundant compounds were a-pinene (38.1%), beta-pinene (17.2%), myrcene (15.0%), spathulenol (4.2%), bicyclogermacrene (4.0%), a-zingiberene (4.0%), and gamma-himachalene (3.7%). Antibacterial activity was tested against Gram-positive and Gram-negative bacteria using the agar disk diffusion method. Activity was observed only against Gram-positive bacteria. MIC values were determined for Staphylococcus aureus ATCC 25923 (200 microg/mL) and Enterococcusfaecalis ATCC 29212 (600 microg/mL).     

Calcium rubies: a family of red-emitting functionalizable indicators suitable for two-photon ca(2+) imaging

We designed Calcium Rubies, a family of functionalizable BAPTA-based red-fluorescent calcium (Ca(2+)) indicators as new tools for biological Ca(2+) imaging. The specificity of this Ca(2+)-indicator family is its side arm, attached on the ethylene glycol bridge that allows coupling the indicator to various groups while leaving open the possibility of aromatic substitutions on the BAPTA core for tuning the Ca(2+)-binding affinity. Using this possibility we now synthesize and characterize three different CaRubies with affinities between 3 and 22 μM. Their long excitation and emission wavelengths (peaks at 586/604 nm) allow their use in otherwise challenging multicolor experiments, e.g., when combining Ca(2+) uncaging or optogenetic stimulation with Ca(2+) imaging in cells expressing fluorescent proteins. We illustrate this capacity by the detection of Ca(2+) transients evoked by blue light in cultured astrocytes expressing CatCh, a light-sensitive Ca(2+)-translocating channelrhodopsin linked to yellow fluorescent protein. Using time-correlated single-photon counting, we measured fluorescence lifetimes for all CaRubies and demonstrate a 10-fold increase in the average lifetime upon Ca(2+) chelation. Since only the fluorescence quantum yield but not the absorbance of the CaRubies is Ca(2+)-dependent, calibrated two-photon fluorescence excitation measurements of absolute Ca(2+) concentrations are feasible.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

A quantitative determination of the polymerization of benzoxazine thin coatings by time-of-flight secondary ion mass spectrometry

Phenol-paraphenylenediamine (P-pPDA) benzoxazines exhibit excellent barrier properties, adequate to protect aluminum alloys from corrosion, and constitute interesting candidates to replace chromate-containing coatings in the aeronautical industry. For the successful application of P-pPDA coatings, it is necessary to decrease the curing temperature to avoid the delamination of the coating while preserving the mechanical properties of the alloy, as well as the barrier properties of the coating. However, decreasing the curing temperature leads to less polymerized films, the extent of which requires a quantitative assessment. While the conversion rate of the polymerization reaction is commonly evaluated for bulk samples using differential scanning calorimetry (DSC), a tool for its evaluation in thin films is missing. Therefore, a new approach was developed for that matter using time-of-flight secondary ion mass spectrometry (ToF-SIMS). The relation between the SIMS data integrated from inside thin films and the DSC results obtained on bulk samples with the same curing cycle allowed to calibrate the SIMS data. With this preliminary calibration of the technique, the polymerization of P-pPDA coatings can be locally determined, at the surface and along the depth of the coating, using dual-beam depth profiling with large argon cluster beam sputtering.     

A new method to study antioxidant capability: hydrogen transfer from phenols to a prefluorescent nitroxide

[reaction: see text]. Rate constants for hydrogen abstraction from phenols by a prefluorescent-TEMPO probe are reported. The nitroxide is employed as a potential model of peroxyl radicals. The probe works by nitroxide suppression of the fluorescence of the chromophore. The fluorescence is restored when the nitroxide abstracts a hydrogen atom to produce the diamagnetic hydroxylamine. The phenols studied in this project exhibited rate constants between 0.003 and 0.2 M(-1) s(-1). A deuterium isotope effect of 10 for TROLOX confirms that the mechanism is dominated by hydrogen transfer.     

Ynamides: Versatile Tools in Organic Synthesis

Ynamides display an exceptionally fine balance between stability and reactivity. They also offer unique and multiple opportunities for the inclusion of nitrogen‐based functionalities into organic molecules, and are emerging as especially useful and versatile building blocks for organic synthesis. Recent breakthroughs in the preparation of these substrates have revitalized interest in nitrogen‐substituted alkynes, and the beginning of the 21st century has witnessed an ever‐increasing number of publications reporting the development of new reactions or synthetic sequences starting from ynamides. This Review highlights major developments in this area.