Synthese von Clathratverbindungen des Typs Cd(mea) m [Pd(CN)4] ·nG

The preparation, identification and some properties of three new clathrate compounds Cd(mea)[Pd(CN)₄] · 2C₆H₆, Cd(mea)₂[Pd(CN)₄] · C₄H₄S and Cd(mea)₂[Pd(CN)₄] · C₄H₄NH (mea = HO-CH₂-CH₂-NH₂) are described.

     

Longitudinal (1)H relaxation optimization in TROSY NMR spectroscopy

A general method to enhance the sensitivity of the multidimensional NMR experiments performed at high-polarizing magnetic field via the significant reduction of the longitudinal proton relaxation times is described. The method is based on the use of two vast pools of "thermal bath" 1H spins residing on hydrogens covalently attached to carbon and oxygen atoms in 13C,15N labeled and fully protonated or fractionally deuterated proteins to uniformly enhance longitudinal relaxation of the 1HN spins and concomitantly the sensitivity of multipulse NMR experiments. The proposed longitudinal relaxation optimization is implemented in the 2D [15N,1H]-LTROSY, 2D [15N,1H]-LHSQC and 3D LTROSY-HNCA experiments yielding the factor 2-2.5 increase of the maximal signal-to-noise ratio per unit time at 600 MHz. At 900 MHz, the predicted decrease of the 1HN longitudinal relaxation times can be as large as one order of magnitude, making the proposed method an important tool for protein NMR at high magnetic fields.     

Selective Transport of Lead(II) and Strontium(II) Through a Crown Ether-Based Polymer Inclusion Membrane Containing Dialkylnaphthalenesulfonic Acid

New polymer inclusion membranes (PIMs) containing 18-membered crownethers and dialkylnaphthalenesulfonic acid are proposed for Sr2+ and Pb2+removal from nitric acid solutions. The influence of source phasecomposition and stripping agents was characterized and permeabilitycoefficients were calculated. The PIMs are easy to prepare and may be usefulin separation and concentration procedures for these cations from complexmixtures such as nuclear waste. Long-term stability was obtained for atleast several weeks of constant use during which no significant change ofpermeability was observed.     

Lead-selective membrane electrodes based on dithiophenediazacrown ether derivatives

Three double-armed diazacrown ethers with two thiophene side groups, 7,16-dithenyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTDC), 7,16-dithenoyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTODC), and 7,16-di-(2-thiopheneacetyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTAODC), have been synthesized and used as novel neutral lead(II) ionophores in ion selective electrode applications. The relationship between the molecular structure of these ionophores and electrochemical properties (linear range, response time, selectivity) of the membrane electrode is discussed. The optimum conditions for the preparation of the electrodes are described. The optimized dithenoyldiazacrown had a detection limit of pPb = 5.7, and Nernstian range with slope 29.2 mV decade⁻¹ from pPb = 5.0 to 2.7. Mercury and silver ions are the major interferences. These electrodes are applied to potentiometric titrations of lead(II) ions and show promise for the determination of lead ions in water samples.     

Natural Abundance 17O-NMR. Study of Some Macrocyclic Complexes with Alkali Metal Cations

Complexation between crown ethers 12C4, 15C5, 18C6 and cryptand 222, and alkali cations Li⁺, Na⁺, K⁺ in various solvents were studied by ¹⁷O-NMR. spectroscopy. Small diamagnetic shifts arising from the cation electric field are observed. They increase according to the sequence K⁺ < Na⁺ < Li⁺. ¹⁷O-linewidth are discussed and compared to the ¹³C relaxation times. Linewidth modification results mainly from modifications of the effective correlation time. In general, for crown ethers, considerable line broadening occurs when the cation fits well into the cavity but line narrowing occurs when the cation is much smaller than the cavity.     

Preparation of polar phase coated open tubular columns for steroid analysis

Summary Open tubular columns made of soda glass may be successfully coated with polar stationary phases after etching with dry HCl. Such columns are useful in difficult separations of steroids and their subsequent identification.     

Reaction of Tetracopper(I)-Phosphonitocavitand with PhSeSiMe3: Synthesis and Structure of a Polyanionic Cluster [pyH]6[(CuCl)9(μ3-SePh)5(μ4-SePh)]

Treatment of tetracopper(I)-phosphonitocavitand [1·Cu₄(μ-Cl)₄(μ₄-Cl)] (2) (1 = tetraphosphonitocavitand [rccc-2,8,14,20-tetrakis-(iso-butyl)-phosphonitocavitand (C₄₄H₄₈O₈P₄Ph₄)]) with PhSeSiMe₃ in THF at low temperature afforded a novel polyanionic cluster [pyH]₆[(CuCl)₉(μ₃-SePh)₅(μ₄-SePh)] (4) as a major product along with a new tetracopper(I)-phosphonitocavitand (3) with a centered μ₃-Cl. Molecular structure of anionic cluster in 4 consists of six PhSe⁻ bridging ligands containing five μ₃-SePh and one exceptional μ₄-SePh bridging nine copper atoms, of which eight copper atoms have trigonal coordination geometry and the other has distorted tetrahedral geometry. Dedicated to Professor Han-Qin Liu on the occasion of his 70th birthday.     

A photo-cured coated-wire calcium ion selective electrode for use in flow injection potentiometry

A multi-sensor cell containing a new photo-cured calcium ion selective electrode sensor is reported. Four membranes containing different components are prepared to determine the one with optimum selectivity and sensitivity. This is shown to consist of the N,N,N',N'-tetracyclohexyl-3-oxapentanediamide ligand (ETH 129) as the ionophore, 2-nitrophenyl octyl ether as the plasticiser and tetradodecyl ammonium tetrakis(4-chlorophenyl) borate as the lipophilic additive. The photo-curing process is applied after coating a thin membrane on a silver wire as substrate transducer to produce the calcium sensor. The curing process is demonstrated to be faster (1 min) than previous methods and does not require a nitrogen atmosphere for reproducible production of membrane response characteristics. Four sensors constructed with the identical optimum membrane are shown to function reproducibly in a multi-sensor flow-through cell using the steady-state mode of flow measurement, and an average calibration slope of 28.5+/-0.4 mV change per activity decade is observed over a log-linear concentration range between 0.01 and 10 mM. The sensor is also shown to respond to changes in pH. Hence, in the flow injection potentiometric mode, a constant carrier buffer composition of pH 8.3 is required for accurate potentiometric calcium determinations. The sensor is used to determine calcium in water samples by flow injection potentiometry. The accuracy of the electrode determination relative to atomic absorption spectroscopy was in the range 5-9% for three different water samples.     

Biomimetic cycloaddition approach to tropolone natural products via a tropolone ortho-quinone methide

[reaction: see text] A study toward a possible biomimetic hetero Diels-Alder reaction is reported between humulene and a novel tropolone ortho-quinone methide. A suitable tropolone ortho-quinone methide precursor has been prepared from 3-methyl-2-furoate. Heating the ortho-quinone methide precursor gave a tropolone ortho-quinone methide, which in the presence of humulene underwent a hetero Diels-Alder reaction to give a deoxy analogue of epolone B.     

Evidence for facile atropisomerism and simple (non-nucleophilic) biradical-forming cycloaromatization within kedarcidin chromophore aglycon

The kinetics and thermodynamics of atropisomerism within the protected kedarcidin chromophore aglycon 8, as well as a series of ansa-bridged synthetic intermediates leading to 8, were determined by 1H NMR spectroscopy. The data show that the ratio of atropisomeric forms of chloropyridine-bridged ansa intermediates is subject to wide variation with seemingly subtle structural variation. The vinyl bromide 4, for example, in the first X-ray structure determination of a kedarcidin ansa-bridged system, was found to exist as a single atropisomer in the solid state, but a nearly equal mixture (K = 0.70) of isomers in solution (t1/2 for isomer interconversion approximately 0.2 s at 20 degrees C). The aglycon 8, a 2.2:1 mixture of atropisomers, was found to undergo direct unimolecular biradical-forming cycloaromatization at ambient temperature in a mixture of 1,4-cyclohexadiene-benzene, without nucleophilic activation. The product 9 was formed as a single atropisomer (k = 2 x 10-4 s-1, t1/2 = 58 min, 81% yield), suggesting that the rate of atropisomerism within 8 is rapid with respect to cycloaromatization. The rate of cycloaromatization of 8 was found to be highly solvent-dependent, being more rapid in the presence of a good hydrogen-atom donor, consistent with the earlier model studies of Hirama et al. that showed that certain nine-membered cyclic (Z)-enediynes may equilibrate with their biradical cycloaromatization products. Incubation of 8 with beta-mercaptoethanol, under conditions mimicking experiments leading to DNA cleavage with kedarcidin, showed no evidence for nucleophilic activation. The product of direct cycloaromatization (9) was isolated instead. The evidence suggests that kedarcidin, like the enediyne agent C-1027, is capable of spontaneous thermal biradical formation without prior chemical activation.