Synthese und Molekülstrukturen von N‐substituierten Diethylgallium‐2‐pyridylmethylamiden

Synthesis and Molekular Structures of N‐substituted Diethylgallium‐2‐pyridylmethylamides (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1a ) and (2‐pyridylmethyl)‐di(tert‐butyl)silylamine ( 1b ) form with triethylgallane the corresponding red adducts 2a and 2b via an additional nitrogen‐gallium bond. These oily compounds decompose during distillation. Heating under reflux in toluene leads to the elimination of ethane and the formation of the red oils of [(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido]diethylgallane ( 3a ) and [(2‐pyridylmethyl)‐di(tert‐butyl)silylamido]diethylgallane ( 3b ). In order to investigate the thermal stability solvent‐free 3a is heated up to 400 °C. The elimination of ethane is observed again and the C‐C coupling product N, N′‐Bis(diethylgallyl)‐1, 2‐dipyridyl‐1, 2‐bis(tert‐butyldimethylsilyl)amido]ethan ( 4 ) is found in the residue. Substitution of the silyl substituents by another 2‐pyridylmethyl group and the reaction of this bis(2‐pyridylmethyl)amine with GaEt₃ yield triethylgallane‐diethylgallium‐bis(2‐pyridylmethyl)amide ( 5 ). The metalation product adds immediately another equivalent of triethylgallane regardless of the stoichiometry. The reaction of GaEt₃ with 2‐pyridylmethanol gives quantitatively colorless 2‐pyridylmethanolato diethylgallane ( 6 ).     

Photodissociation dynamics of pyridine

Photodissociation of pyridine, 2,6-d2-pyridine, and d5-pyridine at 193 and 248 nm was investigated separately using multimass ion imaging techniques. Six dissociation channels were observed at 193 nm, including C5NH5 --> C5NH4 + H (10%) and five ring opening dissociation channels, C5NH5 --> C4H4 + HCN, C5NH5 --> C3H3 + C2NH2, C5NH5 --> C2H4 +C3NH, C5NH5 --> C4NH2 + CH3 (14%), and C5NH5 --> C2H2 + C3NH3. Extensive H and D atom exchanges of 2,6-d2-pyridine prior to dissociation were observed. Photofragment translational energy distributions and dissociation rates indicate that dissociation occurs in the ground electronic state after internal conversion. The dissociation rate of pyridine excited by 248-nm photons was too slow to be measured, and the upper limit of the dissociation rate was estimated to be 2x10(3) s(-1). Comparisons with potential energies obtained from ab initio calculations and dissociation rates obtained from the Rice-Ramsperger-Kassel-Marcus theory have been made.     

Thermodynamic Properties and Melting Behavior of Bi–Sn–Zn Alloys

Summary. The partial and integral enthalpies of mixing of liquid Bi–Sn–Zn alloys were determined at 500°C by a drop calorimetric technique using a Calvet-type microcalorimeter. The ternary interaction parameters in the Bi–Sn–Zn system were fitted using the Redlich-Kister-Muggianu model for substitutional solutions, and isoenthalpy curves of the integral molar enthalpy of mixing at 500°C were constructed. Furthermore, a DSC technique was used to determine the liquidus temperatures in three sections (3, 5, and 7 at.% Zn) as well as the invariant reaction temperature of the ternary eutectic L ⇄ (Bi) + (Sn) + (Zn). The ternary eutectic reaction was found at 135°C.     

Kinetics and mechanism of the Co(II)-assisted oxidation of thioureas by dioxygen

Catalytic oxidation of N,N'-dimethylthiourea and thiourea by dioxygen in water using a new cobalt(II) complex of octasulfophenyltetrapyrazinoporphyrazine was performed under mild conditions. The reaction is shown to include the formation of an intermediate anionic five-coordinate complex followed by an unusual two-electron oxidation to produce the corresponding urea and elemental sulfur (S8). Kinetic and thermodynamic parameters for the different reaction steps of the process were determined. Drastic differences in catalytic activity of cobalt and iron octasulfophenyltetrapyrazinoporphyrazines were observed.     

Aqueous dispersions of single-wall and multiwall carbon nanotubes with designed amphiphilic polycations

Poor solubility of single-walled and multiwalled carbon nanotubes (NTs) in water and organic solvents presents a considerable challenge for their purification and applications. Macromolecules can be convenient solubilizing agents for NTs and a structural element of composite materials for them. Several block copolymers with different chemical functionalities of the side groups were tested for the preparation of aqueous NT dispersions. Poly(N-cetyl-4-vinylpyridinium bromide-co-N-ethyl-4-vinylpyridinium bromide-co-4-vinylpyridine) was found to form exceptionally stable NT dispersions. It is suggested that the efficiency of macromolecular dispersion agents for NT solubilization correlates with the topological and electronic similarity of polymer-NT and NT-NT interactions in the nanotube bundles. Raman spectroscopy and atomic force and transmission electron microcopies data indicate that the polycations are wrapped around NTs forming a uniform coating 1.0-1.5 nm thick. The ability to wind around the NT originates in the hydrophobic attraction of the polymer backbone to the graphene surface and topological matching. Tetraalkylammonium functional groups in the side chains of the macromolecule create a cloud of positive charge around NTs, which makes them hydrophilic. The prepared dispersions could facilitate the processing of the nanotubes into composites with high nanotube loading for electronic materials and sensing. Positive charge on their surface is particularly important for biological and biomedical applications because it strengthens interactions with negatively charged cell membranes. A high degree of spontaneous bundle separation afforded by the polymer coating can also be beneficial for NT sorting.     

Effect of group II metal cations on catecholate oxidation.

The unexpected effects of Ca(2+) on the free-radical chain reactions of dopamine, norepinephrine, isoproterenol, and pyrocatechol oxidation are studied using oxygen consumption measurements, EPR-spectroscopy, UV/VIS spectrophotometry, and by potentiometric titration. It is found that the formation of Ca(2+)-catecholate complexes is accompanied by an increase in the dissociation constants (K(ai) ) of their phenolic hydroxyls. At pH>pK(ai) and in the presence of alkaline-earth metal cations, the rate of catecholate oxidation increases (Ca(2+), Mg(2+)> Sr(2+), Ba(2+)), whereas on addition of Zn ions the rate decreases. The effects of Group II metal cations on catecholate autoxidation are concomitant with a transient increase of the EPR signal for metal-semiquinonate complexes. Therefore, the effects of Ca(2+) and other alkaline-earth metal cations on catecholate autoxidation can be defined as 1) additional deprotonation of catechol OH-groups involved in the formation of M(2+)-catecholate complexes, the latter exceeding catechols in the susceptibility to dioxygen-induced oxidation and 2) formation of relatively stable free-radical intermediates responsible for chain propagation.     

Importance of micellar kinetics in relation to technological processes

The association of many classes of surface-active molecules into micellar aggregates is a well-known phenomenon. Micelles are in dynamic equilibrium, constantly disintegrating and reforming. This relaxation process is characterized by the slow micellar relaxation time constant, tau(2), which is directly related to the micellar stability. Theories of the kinetics of micelle formation and disintegration have been discussed to identify the gaps in our complete understanding of this kinetic process. The micellar stability of sodium dodecyl sulfate micelles has been shown to significantly influence technological processes involving a rapid increase in interfacial area, such as foaming, wetting, emulsification, solubilization, and detergency. First, the available monomers adsorb onto the freshly created interface. Then, additional monomers must be provided by the breakup of micelles. Especially when the free monomer concentration is low, which is the case for many nonionic surfactant solutions, the micellar breakup time is a rate-limiting step in the supply of monomers. The Center for Surface Science & Engineering at the University of Florida has developed methods using stopped flow and pressure jump with optical detection to determine the slow relaxation time of micelles of nonionic surfactants. The results showed that the ionic surfactants such as SDS exhibit slow relaxation times in the range from milliseconds to seconds, whereas nonionic surfactants exhibit slow relaxation times in the range from seconds (for Triton X-100) to minutes (for polyoxyethylene alkyl ethers). The slow relaxation times are much longer for nonionic surfactants than for ionic surfactants, because of the absence of ionic repulsion between the head groups. The observed relaxation times showed a direct correlation with dynamic surface tension and foaming experiments. In conclusion, relaxation time data of surfactant solutions correlate with the dynamic properties of the micellar solutions. Moreover, the results suggest that appropriate micelles with specific stability or tau(2) can be designed by controlling the surfactant structure, concentration, and physicochemical conditions (e.g., salt concentration, temperature, and pressure). One can also tailor micelles by mixing anionic/cationic or ionic/nonionic surfactants for a desired stability to control various technological processes.     

Iodinated 1,4-naphthoquinones

Iodination of 5-amino- and 6-amino-1,4-naphthoquinones with I₂ and HIO₃ in aqueous dioxane occurs only at the benzoid ring. Depending on the reaction conditions, either aminoiodo- or aminodiiodonaphthoquinones are produced. Diazotization of these compounds followed by reduction or replacement of the diazo group with iodine affords mono- or polyiodo derivatives of 1,4-naphthoquinone. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1465–1469, June, 2005.     

Structure, bonding, and reactivity of Ti and Zr amidate complexes: DFT and X-ray crystallographic studies

Easily prepared and highly modular organic amide proligands have been used to synthesize a series of new bis(amidate)-bis(amido) Ti and Zr complexes via protonolysis. These complexes have been structurally characterized by NMR spectroscopy and X-ray crystallography. The solid-state molecular structures of these complexes indicate that the amidate ligands bind to the metal centers in an exclusively bidentate fashion, resulting in discrete monomeric species. Geometric isomerism in these species is highly dependent upon the steric characteristics of the proligands utilized in the synthesis. In solution, these complexes are observed to isomerize on the NMR time scale, with one isomer being predominant. Bonding in the bis(amidate)-bis(amido) complexes was investigated by DFT calculations. The geometric isomers predicted by theory matched the experimentally observed results, within experimental error. The orbitals associated with amidate-metal bonding are energetically well below the frontier orbitals. The HOMO in these complexes is a pi orbital associated with amido ligand-to-metal bonding character, while the LUMO in all cases is a vacant d orbital on the metal center.