Extraction-spectrophotometric study on the vanadium(V)-2,3-dihydroxynaphthalene — iodonitrotetrazolium chloride — water — chloroform system and its analytical application

The formation of a new ternary ion-associate complex of vanadium(V) with 2,3-dihydroxynaphthalene and iodonitrotetrazolium chloride with a composition ratio of 1:2:1 is reported. The complex is quantitatively extracted from water into chloroform. The molar absorptivity (ɛ) of the extract at λ _max=340 nm is 2.5 × 10⁴ dm³/mol cm, and Beer’s law is obeyed for concentrations ranging from 0.1 to 0.9 μg/cm³ V(V). The following constants are determined: the extraction constant, the association constant, the distribution constant, and the recovery factor. The effects of foreign ions and reagents are studied. A selective and sensitive method is developed for determination of vanadium in steels.     

Thermal and Photochemical Reactions of 1,2-Annelated Barrelenes and Hydrobarrelenes in the presence of transition-metal carbonyls

The [Co₂(CO)₈]-mediated retro-Diels-Alder reaction of the annelated barrelenes 1 afforded the 1H-indol-2(3H)-one derivatives 3 (Scheme 1), while the hydrobarrelene 4a , under the same conditions, was converted to the anilide 6 (Scheme 2); 4b remained unaffected. The direct irradiation of 1 led to the annelated cyclooctatetraenes 7 (Scheme 3). On irradiation in the presence of excess of [Fe(CO)₅], 1a , 1b , and 4a gave the tricarbonyliron complexes 8 , 9 , and 11 , respectively (Schemes 3 and 4); under these conditions, 4b was inert.     

Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

Structural and mechanistic look at the orthoplatination of aryl oximes by dichlorobis(sulfoxide or sulfide)platinum(II) complexes

Structural and mechanistic aspects of orthoplatination of acetophenone and benzaldehyde oximes by the platinum(II) sulfoxide and sulfide complexes [PtCl(2)L(2)] (2, L = SOMe(2) (a), rac-SOMePh (b), R-SOMe(C(6)H(4)Me-4) (c), and SMe(2) (d)) to afford the corresponding platinacycles cis-(C,S)-[Pt(II)(C(6)H(3)-2-CR'=NOH-5-R)Cl(L)] (3, R, R' = H, Me) have been investigated. The reaction of acetophenone oxime with sulfoxide complex 2a in methanol solvent occurs noticeably faster than with sulfide complex 2d due to the fact that the sulfoxide is a much better platinum(II) leaving ligand than the sulfide. Evidence is presented that the orthoplatination is a multistep process. The formation of unreactive dichlorobis(N-oxime)platinum(II) cations accounts for the rate retardation by excess acetophenone oxime and suggests the importance of pseudocoordinatively unsaturated species for the C-H bond activation by Pt(II). A comparative X-ray structural study of dimethyl sulfoxide platinacycle 3b (R = R' = Me) and its sulfide analogue 3e (R = H, R' = Me), as well as of SOMePh complex 3c (R = H, R' = Me), indicated that they are structurally similar and a sulfur ligand is coordinated in the cis position with respect to the sigma-bound phenyl carbon. The differences concern the Pt-S bond distance, which is notably longer in the sulfide complex 3e (2.2677(11) A) as compared to that in sulfoxide complexes 3b (2.201(2)-2.215(2) A) and 3c (2.2196(12) A). Whereas the metal plane is practically a plane of symmetry in 3b due to the H-bonding between the sulfoxide oxygen and the proton at carbon ortho to the Pt-C bond, an S-bonded methyl of SOMePh and SMe(2) is basically in the platinum(II) plane in complexes 3c and 3e, respectively. There are intra- and intermolecular hydrogen bond networks in complex 3b. An interesting structural feature of complex 3c is that the two independent molecules in the asymmetric unit of the crystal reveal an extremely short Pt-Pt contact of 3.337 A.     

Potentiometric response of graphite electrodes coated with modified polymer films

Graphite electrodes coated with chemically-modified polymer films are described. Several different polymers were used, including poly(acrylic acid), poly[triethyl(vinylbenzyl)ammonium chloride], poly[trihexyl(vinylbenzyl)ammonium chloride], and poly[trihexyl(vinylbenzyl)ammonium thiocyanate]. A cation-responsive electrode can be prepared from poly(acrylic acid)-coated graphite. Anion-responsive electrodes can be prepared from graphite coated with polymeric quaternary amines. In these electrodes, the ion-sensing species is irreversibly attached to the polymer (rather than physically entrapped within a polymer matrix); this factor eliminates leaching of the active component, and the addition of a plasticizer is unnecessary. A selective sensor for thiocyanate is described; it yields a Nernstian response over the concentration range 1 × 10^?1–1 × 10^?5 M sodium thiocyanate.     

Differential pulse voltammetry with fast pulse repetition times in a flow-injection system with a copper-amalgam electrode

The reductive determination of cadmium and zinc is used to illustrate the effects of pulse repetition times in differential pulse voltammetry at solid electrodes. With 100-ms repetition times, signal-to-background ratio is shown to improve in flow-injection response studies at a copper-amalgam working electrode for both voltage scanning and amperometric operation, allowing scan rates up to 100 mV s^?1, and detection limits of 0.07–0.15 ng for cadmium and zinc after deaeration of sample solutions. Peak widths at baseline in the range 12–30 s, depending on flow rate, are obtained in the flow-injection system for cadmium and zinc at working potentials of ?0.77 and ?1.27 V, respectively. Interferences occur when cadmium is in large excess over zinc, although the voltammetric peaks do not overlap.     

The Incorporation of Titania into Modified Silicates for Solar Photodegradation of Aqueous Species

A new class of sol-gel-derived photocatalytic materials has been synthesized and used in solar-assisted photodegradation studies. The materials are comprised of a homogeneous dispersion of commercial TiO₂ powder into silica and organically modified silicate (Ormosil) hosts. The efficiency of the photocatalytic properties of these TiO₂-containing materials was determined by their relative performance in the solar photodecomposition of aqueous rhodamine B. The improved adsorption properties of the modified materials compared to commercial TiO₂ increase the photodecomposition rate and the buoyancy properties, although excess hydrophobicity decreases the wetted section of the catalyst and its photocatalytic performance. These materials can be used as floatable catalysts for solar-assisted water purification.     

Thermal properties of rare earth dodecaborides

We have measured heat capacity and thermal expansion of rare earth dodecaborides REB₁₂ (RE=Y, Tb-Tm, Lu). YB₁₂ and LuB₁₂ are diamagnetics whereas the other dodecaborides are ordered antiferromagnetically. The amplitude of the heat capacity discontinuity at the Néel temperature and the shape of the heat capacity variation in the critical region for all these antiferromagnetics are characteristics for amplitude-modulated magnetic structures. In the ordered state TbB₁₂ reveals two first-order phase transitions, most likely due to magnetic structure changes. The heat capacity of ErB₁₂ just below the Néel point shows an anomaly of unclear origin. From the Schottky contribution to the heat capacity we have determined crystal field parameters. They are completely different than that is estimated from Point Charge Model.     

Synthesis and structural characterization of carbon-centered tris(pentafluorophenyl)silyl derivatives

A general method for the synthesis of carbon-centered tris(pentafluorophenyl)silyl derivatives (RSi(C₆F₅)₃) by reaction of trichlorosilanes (RSiCl₃) with pentafluorophenylmagnesium bromide was described. The crystal structures of obtained compounds were studied by X-ray diffraction analysis (7 structures). The peculiarities of crystal packing were analyzed by means of DFT calculations.