An Assay for the Quantitation of Photofrin in Tissues and Fluids

A method for determining the concentration of Photofrin in tissues and biological fluids was developed. The procedure is based on the dissolution of biological material with Solvable a commercially available tissue so-lubilizer, followed by porphyrin-specific fluorescence detection and measurement. It was found necessary to use a quadratic standard curve for the estimation of unknown Photofrin concentrations. While this method is limited to compounds that are stable in strong base, it has the advantages of being sensitive, rapid and low cost .     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Ambient-pressure vapor deposition of octanethiol self-assembled monolayers

Scanning tunneling microscopy was used to characterize self-assembled monolayers (SAMs) of octanethiol on Au(111), created using vapor deposition at elevated temperatures and ambient pressure. Monolayers contained large, close-packed ( radical3 x radical3)R30 degrees domains with sizes considerably larger than those typically formed from conventional solution-phase preparation and with crystallographically straight domain boundaries. New striped surface phases were also observed, including a 13 x radical3 phase with a density that was 69% of the close-packed density; these striped phases appeared topographically higher in STM images than close-packed monolayers.     

Synthesis, structure, and X-band (9.5 GHz) EPR characterization of the new series of pH-sensitive spin probes: N,N-disubstituted 4-amino-2,2,5,5-tetramethyl-3-imidazoline 1-oxyls

[reaction: see text] An approach to the synthesis of new imidazoline nitroxides bearing an N',N'-disubstituted amidine group is reported. The approach is based on the alkylation of diamagnetic 4-R-amino-1,2,2,5,5-pentamethyl-3-imidazolines with bromoacetic acid ethyl ester; the products of alkylation are further oxidized to the corresponding nitroxides. The approach allows a variety of functional groups to be introduced into the nitroxide molecule structure. Alkylation with bromoacetic acid ethyl ester was found to proceed with high regioselectivity and afford the products of exo-alkylation. The regiochemical assignment is made on the basis of 13C NMR spectra and confirmed by X-ray diffraction study. All of the nitroxides synthesized here were shown to have pH-dependent EPR spectra with pKa ranging from 3.5 to 6.2. For nitroxides 13 bearing the carboxylic group remote to the nitroxide moiety, the changes in isotropic magnetic parameters of EPR spectra due to reversible deprotonation of the carboxylic group were found to be small. For these nitroxides, we demonstrate an alternative approach for pKa determination that is based on measuring the peak-to-peak line width of the EPR spectrum in the presence of the paramagnetic broadening agent potassium ferricyanide. The partition coefficients of nitroxides in octanol/H2O and octanol/phosphate buffer solution mixtures were measured to reveal a range of their lipophilicities.     

Does alpha-fluorination affect the structural trans-influence and kinetic trans-effect of an alkyl ligand? Molecular structures of Pd(TMEDA)(CH(3))(R(F)) and a kinetic study of the trans to cis isomerization of Pt(TMEDA)(CH(3))(2)I(R(F)) [R(F) = CF(2)CF(3), CFHCF(3), CH(2)CF(3)

Reaction of Pd(TMEDA)(CH(3))(2) [TMEDA = tetramethylethylenediamine] with fluoroalkyl iodides R(F)I affords a series of square planar Pd(II) complexes Pd(TMEDA)(CH(3))(R(F)) [R(F) = CF(2)CF(3) (9), CFHCF(3) (10), CH(2)CF(3) (11)], presumably by oxidative addition followed by reductive elimination of CH(3)I. The solid-state structures of each compound have been determined by single crystal X-ray diffraction studies, allowing the effect of increasing alpha-fluorination on the structural trans-influence of alkyl ligands to be examined. In these compounds there is no significant difference observed in the trans-influence of the three fluorinated alkyl ligands toward the trans-N atom, although a significant cis-influence on the neighboring methyl ligand is apparent. Oxidative addition of the same series of fluoroalkyl ligands to the corresponding Pt(TMEDA)(CH(3))(2) affords octahedral Pt(IV) complexes trans-Pt(TMEDA)(CH(3))(2)(R(F))I [R(F) = CF(2)CF(3) (12), CFHCF(3) (13), CH(2)CF(3) (14)] as the kinetic products. In each case, subsequent isomerization to the corresponding all cis-isomers is observed; in the case of 13, the stereocenter at the alpha-carbon results in two diastereomeric cis-isomers, which are formed at different rates. The molecular structures of 13 and its more stable all cis-isomer 16b have been crystallographically determined. Kinetic studies of the trans-cis isomerization reactions show the mechanism to involve a polar transition state, presumably involving iodide dissociation, followed by rearrangement of the cation, and iodide recombination. High dielectric solvents increase the rate, but solvent coordinating ability has no effect. Dissolved salts (LiI, LiOTf) show normal accelerative salt effects, with no inhibition in the case of added iodide, consistent with the formation of an intimate ion pair intermediate. The kinetic parameters show that the trans-effects of fluoroalkyl ligands in these compounds follow the order expected from the relative sigma-donor properties of the ligands, with CF(2)CF(3) < CFHCF(3) < CH(2)CF(3).     

Chemical ionization mass spectra of mononitroarenes

The H₂ and CH₄ chemical ionization mass spectra of a selection of substituted nitrobenzenes have been determined. It is shown that reduction of the nitro group to the amine is favoured by high source temperatures and the presence of water in the ion source. The H₂ chemical ionization mass spectra are much more useful for distinguishing between isomeric compounds than the CH₄ CI mass spectra because of the more extensive fragmentation. For ortho substituents bearing a labile hydrogen abundant [MH ? H₂O]⁺ fragments are observed. When the substituent is electron-releasing both ortho and para substituted nitrobenzenes show abundant [MH? OH]⁺ fragment ions while meta substituted compounds show abundant loss of NO and NO₂ from [MH]⁺. The latter fragmentation is interpreted in terms of protonation para to the substituent or ortho to the vitro function, while the first two fragmentation routes arise from protonation at the nitro group. When the substituent is electron-attracting the chemical ionization mass spectra of isomers are very similar except for the H₂O loss reaction for ortho compounds.     

Unrestricted perfect pairing: the simplest wave-function-based model chemistry beyond mean field

The perfect pairing (PP) approximation from generalized valence bond theory is formulated in an unrestricted fashion for both closed- and open-shell systems using a coupled cluster ansatz. In the model chemistry proposed here, active electron pairs are correlated, but the unpaired or radical electrons remain uncorrelated, leading to a linear number of decoupled cluster amplitudes which can be solved for analytically. The alpha and beta spatial orbitals are variationally optimized independently. This minimal treatment of electron-electron correlation noticeably improves upon symmetry-breaking problems and other pathologies in Hartree-Fock (HF) theory and may be computed using the resolution of the identity approximation at only a factor of several times more effort than HF itself. PP also generally predicts improved molecular structures over HF. This compact, correlated wave function potentially provides a useful starting point for dynamical correlation corrections.     

CeO2担载Cu纳米粒子电催化CO2还原产乙烯：CeO2不同暴露晶面对催化性能的影响

Fossil fuels are expected to be the major source of energy for the next few decades. However, combustion of nonrenewable resources leads to the release of large quantities of CO₂, the primary greenhouse gas. Notably, the concentration of CO₂ in the atmosphere is increasing annually at an astounding rate. Electrochemical CO₂ reduction (ECR) to value-added fuels and chemicals using electricity from intermittent renewable energy sources is a carbon-neutral method to alleviate anthropogenic CO₂ emissions. Despite the steady progress in the selective generation of C₁ products (CO and formic acid), the production of multi-carbon species still suffers from low selectivity and efficiency. As an ECR product, ethylene (C₂H₄) has a higher energy density than do C₁ species and is an important industrial feedstock in high demand. However, the conversion of CO₂ to C₂H₄ is plagued by low productivity and large overpotential, in addition to the severe competing hydrogen evolution reaction (HER) during the ECR. To address these issues, the design and development of advanced electrocatalysts are critical. Here, we demonstrate fine-tuning of ECR to C₂H₄ by taking advantage of the prominent interaction of Cu with shape-controlled CeO₂ nanocrystals, that is, cubes, rods, and octahedra predominantly covered with (100), (110), and (111) surfaces, respectively. We found that the selectivity and activity of the ECR depended strongly on the exposed crystal facets of CeO₂. The overall ECR Faradaic efficiency (FE) over Cu/CeO₂(110) (FE ≈ 56.7%) surpassed that of both Cu/CeO₂(100) (FE ≈ 51.5%) and Cu/CeO₂(111) (FE ≈ 48.4%) in 0.1 mol·L^-1 KHCO₃ solutions with an H-type cell. This was in stark contrast to the exclusive occurrence of the HER over pure carbon paper, CeO₂(100), CeO₂(110), and CeO₂(111). In particular, the FE toward C₂H₄ formation and the partial current density increased in the sequence Cu/CeO₂(111) < Cu/CeO₂(100) < Cu/CeO₂(110) within applied bias potentials from -1.00 to -1.15 V (vs. the reversible hydrogen electrode), reaching 39.1% over Cu/CeO₂(110) at a mild overpotential (1.13 V). The corresponding values for Cu/CeO₂(100) and Cu/CeO₂(111) were FE_C2H4 ≈ 31.8% and FE_C2H4 ≈ 29.6%, respectively. The C₂H₄ selectivity was comparable to that of many reported Cu-based electrocatalysts at similar overpotentials. Furthermore, the FE for C₂H₄ remained stable even after 6 h of continuous electrolysis. The superior ECR activity of Cu/CeO₂(110) to yield C₂H₄ was attributed to the metastable (110) surface, which not only promoted the effective adsorption of CO₂ but also remarkably stabilized Cu⁺, thereby boosting the ECR to produce C₂H₄. This work offers an alternative strategy to enhance the ECR efficiency by crystal facet engineering.     

Formation of stable Meisenheimer adduct ion pairs in apolar solvents: implications for stereoselective reactions

[reaction: see text] A detailed study concerning the formation of Meisenheimer adducts in biphasic solvent systems is described. The process relies on utilizing a significantly lipophilic quaternary ammonium salt to transfer a nucleophile (e.g., hydroxide ion) between an aqueous and organic layer containing the electron-deficient aromatic substrate. Provided that the organic layer is sufficiently apolar, the resultant Meisenheimer adduct is considerably stable, likely the result of a strong ion-pairing interaction between the large polarizable anionic complex and the diffusively charged tetraalkylammonium cation. Using the diethylamide of 3,5-dinitrobenzoic acid as a model compound, the influence of ion-pairing reagents and solvents on adduct formation was investigated. Dramatically increased equilibrium formation of the Meisenheimer adduct is observed in the biphasic medium (e.g., benzene/2 M NaOH) relative to the same adduct generated in single-phase systems. Spectroscopic studies on this adduct are consistent with those conducted in single-phase polar or dipolar aprotic solvents. The methodology is extended to performing highly enantioselective biphasic kinetic resolutions of several racemic electron-deficient amides.     

Sublimation enthalpy of dye molecules measured using fluorescence

We present an in-flight fluorescence detection scheme for molecular beams which is applied to determine the enthalpy of sublimation of dye molecules. We investigate tetraphenylporphyrin (TPP), porphine, and nile red, which are believed to be suitable candidates for molecular de Broglie wave interferometry. The measured values are H(sub)(TPP)=142+/-3 kJ/mol, H(sub)(porphine)=87+/-3 kJ/mol, and H(sub)(nile red)=66+/-2 kJ/mol. For TPP, sublimation enthalpies differ in the literature by more than a factor of 2. Our measurements confirm a value at the lower end of this scale. We discuss changes in the character of the molecular flow with the source temperature as a prime reason for discrepancies in the published data.