Structure correlation of silylated dicarboxylic acid monomer and its respective oligomeric polyamide-imide using experimental and theoretical vibrational spectra

Correlation between theoretical and experimental (infrared and Raman spectroscopies) vibrational spectra of two compounds, both with a silyl group present in their main chain and with an optically active structure (L-valine) as side group, was performed. These compounds are based in a chiral dicarboxylic acid monomer and its respective polyamide-imide, oligomer that was previously synthesized by a direct polycondensation. Spectra were recorded in the region comprised between 500 and 4000?cm^?1 for infrared and Raman analysis. The Raman spectra were obtained through a 1064?nm laser as excitation source.

Theoretical models were carried out in order to find the optimal molecular geometry of the analyzed systems, with a complete assignment of their vibrational spectra. The Raman experimental data obtained with a Nd:YAG laser for this kind of silylated organic compounds, and the comparison between these results with the theoretical data is a useful advance in the polymer synthesis field, which can be used as reference for subsequent studies.     

Effect of different inorganic filler over isothermal and non-isothermal crystallization of polypropylene homopolymer

In this study, the effect of several inorganic fillers: silicon oxide (SiO₂), nanoclay (C20A), alumina (Al₂O₃), and calcium carbonate (CaCO₃) on the crystallization behavior of polypropylene were analyzed for composites with fixed filler content (5 mass%) prepared by intensive mixing following by compression molding. In addition, for calcium carbonate, which produces the highest increase on toughness, PP grafted with maleic anhydride (PP-g-MA) was added to enhance the compatibility. In that case, different content of particles was used (from 5 to 20 mass%) and the synergic effect of both incorporations was demonstrated. For this purpose, isothermal and non-isothermal crystallization tests were carried out in the bulk (by differential scanning calorimetry). In addition, the spherulitic growth was studied (by optical microscopy). Different models were used to predict the relative degree of crystallinity and several parameters were analyzed. All results indicate that whereas alumina and calcium carbonate acted as nucleating agents, silica and nanoclay displayed an opposite behavior. The full models that take into account the different parameters during cooling under isothermal and non-isothermal conditions were used to construct continuous cooling transformation and time temperature transformation diagrams. Both kind of diagrams provide a fundamental tool to understand the crystallization behavior of studied composites and are useful to determine the processing conditions.     

A novel alkylation procedure using MW irradiation for the synthesis of 1,2,3-trisubstituted 1,4,5,6,7,8-hexahydro-1,3-diazocinium salts from their corresponding 1,2-diaryldiazocines

In this work, we describe the synthesis of a series of 1,2,3-trisubstituted-1,4,5,6,7,8-hexahydro-1,3-diazocinium salts (1) by alkylation of the corresponding 1,2-diaryl-1,4,5,6,7,8-hexahydro-1,3-diazocines (2). Compounds 2 were obtained by ethyl polyphosphate-promoted cyclocondensation of N-aroyl-N′-arylpentamethylenediamines (3). Reaction of compounds 2 with alkyl iodides led to 1,2,3-trisubstituted 1,4,5,6,7,8-hexahydro-1,3-diazocinium iodides (1), a new family of cyclic amidinium salts. The best yields for the alkylation were achieved using a mixture of DCM–DMSO (10:1) as solvent. The reaction times of both, the cyclocondensation of compounds 3 and the reaction of 2 with alkyl halides, are dramatically decreased when using microwave irradiation.     

Actinide arene-metalates: ion pairing effects on the electronic structure of unsupported uranium–arenide sandwich complexes

Addition of [UI₂(THF)₃(μ-OMe)]₂·THF (2·THF) to THF solutions containing 6 equiv. of K[C₁₄H₁₀] generates the heteroleptic dimeric complexes [K(18-crown-6)(THF)₂]₂[U(η⁶-C₁₄H₁₀)(η⁴-C₁₄H₁₀)(μ-OMe)]₂·4THF (118C6·4THF) and {[K(THF)₃][U(η⁶-C₁₄H₁₀)(η⁴-C₁₄H₁₀)(μ-OMe)]}₂ (1THF) upon crystallization of the products in THF in the presence or absence of 18-crown-6, respectively. Both 118C6·4THF and 1THF are thermally stable in the solid-state at room temperature; however, after crystallization, they become insoluble in THF or DME solutions and instead gradually decompose upon standing. X-ray diffraction analysis reveals 118C6·4THF and 1THF to be structurally similar, possessing uranium centres sandwiched between bent anthracenide ligands of mixed tetrahapto and hexahapto ligation modes. Yet, the two complexes are distinguished by the close contact potassium-arenide ion pairing that is seen in 1THF but absent in 118C6·4THF, which is observed to have a significant effect on the electronic characteristics of the two complexes. Structural analysis, SQUID magnetometry data, XANES spectral characterization, and computational analyses are generally consistent with U(iv) formal assignments for the metal centres in both 118C6·4THF and 1THF, though noticeable differences are detected between the two species. For instance, the effective magnetic moment of 1THF (3.74 μ_B) is significantly lower than that of 118C6·4THF (4.40 μ_B) at 300 K. Furthermore, the XANES data shows the U L_III-edge absorption energy for 1THF to be 0.9 eV higher than that of 118C6·4THF, suggestive of more oxidized metal centres in the former. Of note, CASSCF calculations on the model complex {[U(η⁶-C₁₄H₁₀)(η⁴-C₁₄H₁₀)(μ-OMe)]₂}²⁻ (1*) shows highly polarized uranium–arenide interactions defined by π-type bonds where the metal contributions are primarily comprised by the 6d-orbitals (7.3 ± 0.6%) with minor participation from the 5f-orbitals (1.5 ± 0.5%). These unique complexes provide new insights into actinide–arenide bonding interactions and show the sensitivity of the electronic structures of the uranium atoms to coordination sphere effects.

Use of Chatt metal-arene protocols with uranium leads to the synthesis of the first well-characterized, unsupported actinide–arenide sandwich complexes. The electronic structures of the actinide centres show a key sensitivity to ion pairing effects.     

Full-Atom Model of the Agonist LPS-Bound Toll-like Receptor 4 Dimer in a Membrane Environment

The Toll-like receptor 4 (TLR4)/myeloid differentiation factor 2 (MD-2) innate immunity system is a membrane receptor of paramount importance as therapeutic target. Its assembly, upon binding of Gram-negative bacteria lipopolysaccharide (LPS), and also dependent on the membrane composition, finally triggers the immune response cascade. We have combined ab-initio calculations, molecular docking, all-atom molecular dynamics simulations, and thermodynamics calculations to provide the most realistic and complete 3D models of the active full TLR4 complex embedded into a realistic membrane to date. Our studies give functional and structural insights into the transmembrane domain behavior in different membrane environments, the ectodomain bouncing movement, and the dimerization patterns of the intracellular Toll/Interleukin-1 receptor domain. Our work provides TLR4 models as reasonable 3D structures for the (TLR4/MD-2/LPS)₂ architecture accounting for the active (agonist) state of the TLR4, and pointing to a signal transduction mechanism across cell membrane. These observations unveil relevant molecular aspects involved in the TLR4 innate immune pathways and will promote the discovery of new TLR4 modulators.     

Double Hook Perylene Diimide as a New Receptor for PAHs: An Experimental and Theoretical Study

In a one-step reaction, we prepared a dibenzylamine perylene diimide derivative (PDI). Its double hook structure allows for self-association with a constant of K_d ∼10⁸ M⁻¹ determined by fluorescence. We confirmed its ability to bind PAHs using UV/Vis, fluorescence, and ¹H NMR titrations in CHCl₃. The complex formation signature in UV/vis is a new band at 567 nm. The calculated binding constants (K_a∼10⁴ M⁻¹) follow the trend pyrene>perylene>phenanthrene>naphthalene>anthracene. Theoretical modeling of these systems using DFT ωB97X-D/6-311G(d,p) proved helpful in rationalizing the complex formation and the observed association trend. The distinctive signal in UV/vis is due to a charge transfer in the complex from orbitals in the guest to the host. SAPT(DFT) confirmed that the driving forces in the complex formation are exchange and dispersion (π–π interactions). Still, the recognition ability depends on the electrostatic component of the interaction, a minor fraction.     

f-block MOFs: A Pathway to Heterometallic Transuranics

A novel series of heterometallic f-block-frameworks including the first examples of transuranic heterometallic ²³⁸U/²³⁹Pu-metal–organic frameworks (MOFs) and a novel monometallic ²³⁹Pu-analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)-MOF formation and reported the first value of a U-to-Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid-state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An-integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An-containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.     

Screening of Acrylamide of Par-Fried Frozen French Fries Using Portable FT-IR Spectroscopy

Current assays for acrylamide screening rely heavily on LC-MS/MS or GC-MS, techniques that are not suitable to support point of manufacturing verification because it can take several weeks to receive results from a laboratory. A portable sensor that can detect acrylamide levels in real-time would enable in-house testing to safeguard both the safety of the consumer and the economic security of the agricultural supplier. Our objective was to develop a rapid, accurate, and real-time screening technique to detect the acrylamide content in par-fried frozen French fries based on a portable infrared device. Par-fried French fries (n = 70) were manufactured at times ranging from 1 to 5.5 min at 180 °C to yield a wide range of acrylamide levels. Spectra of samples were collected using a portable FT-IR device operating from 4000 to 700 cm⁻¹. Acrylamide was extracted using QuEChERS and quantified using uHPLC-MS/MS. Predictive algorithms were generated using partial least squares regression (PLSR). Acrylamide levels in French fries ranged from 52.0 to 812.8 µg/kg. The best performance of the prediction algorithms required transformation of the acrylamide levels using a logarithm function with models giving a coefficient of correlation (Rcv) of 0.93 and RPD as 3.8, which means the mid-IR model can be used for process control applications. Our data corroborate the potential of portable infrared devices for acrylamide screening of high-risk foods.     

Linear‐Hyperbranched Amphiphilic AB Diblock Copolymers Based on Polystyrene and Hyperbranched Polyglycerol

Summary: A convenient three‐step strategy has been developed for the preparation of well‐defined amphiphilic, linear‐hyperbranched block copolymers by hypergrafting. The synthetic procedure is based on a combination of carbanionic polymerization with the alkoxide‐based, controlled ring‐opening multibranching polymerization of glycidol. A linear AB diblock copolymer polystyrene‐block‐polybutadiene (PS‐b‐PB) with narrow polydispersity was obtained by anionic copolymerization. Subsequent hydroxylation by hydroboration led to PS₅₀₈‐b‐(PB‐OH)₅₆, used as macroinitiator for the polymerization of glycidol under slow monomer addition conditions.

Structure of the linear‐hyperbranched amphiphilic AB diblock copolymer PS₅₀₈‐b‐(PB₅₆‐hg‐PG_x) and an AFM micrograph of its micellar core–shell structure observed after solution casting.     

Palladium-catalyzed chemoselective cross-coupling of acyl chlorides and organostannanes

Chemoselective cross-coupling of aliphatic and aromatic acyl chlorides with aryl-, heteroaryl-, and alkynylstannanes proceeds in up to 98% yield using 2.5 mol % of bis(di-tert-butylchlorophosphine)palladium(II) dichloride as the precatalyst. Various functional groups including aryl chlorides and bromides that usually undergo oxidative addition to palladium complexes bearing phosphinous acid or dialkylchlorophosphine ligands are tolerated. This procedure allows convenient ketone formation and eliminates inherent limitations of Friedel-Crafts acylations such as substituent-directing effects and typical reactivity requirements of Lewis acid-catalyzed electrophilic aromatic substitutions.