Detection of a stable nitroxide during chemical depolymerization of heparin

The use of low-molecular-weight heparins (LMWHs) has become common, since compared to unfractionated heparin (UFH), they have a much longer plasma half-life and lower incidence of side effects. LMWHs are derived from the depolymerization of UFH, obtained either chemically, physically or enzymatically. We employed electron spin resonance (ESR) spectroscopy to study the depolymerization of UFH by copper in the presence of hydrogen peroxide. A stable nitroxide radical was detected. This could be generated by the hydroxyl radical attack either to the N-SO⁻₃ group or to free amino groups present in the UFH preparation.     

Polar effects and structural variation in 4-substituted 1-phenylbicyclo[2.2.2]octane derivatives: a quantum chemical study

The transmission of polar effects through the bicyclo[2.2.2]octane framework has been investigated by ascertaining how the geometry of a phenyl group at a bridgehead position is affected by a variable substituent at the opposite bridgehead position. We have determined the molecular structure of several Ph-C(CH(2)-CH(2))(3)C-X molecules (where X is a charged or dipolar substituent) from HF/6-31G and B3LYP/6-311++G molecular orbital calculations and have progressively replaced each of the three -CH(2)-CH(2)- bridges by a pair of hydrogen atoms. Thus the bicyclo[2.2.2]octane derivatives were changed first into cyclohexane derivatives in the boat conformation, then into n-butane derivatives in the anti-syn-anti conformation, and eventually into assemblies of two molecules, Ph-CH(3) and CH(3)-X, appropriately oriented and kept at a fixed distance. For each variable substituent the deformation of the benzene ring relative to X = H remains substantially the same even when the substituent and the phenyl group are no longer connected by covalent bonds. This provides unequivocal evidence that long-range polar effects in bicyclo[2.2.2]octane derivatives are actually field effects, being transmitted through space rather than through bonds. Varying the substituent X in a series of Ph-C(CH(2)-CH(2))(3)C-X molecules gives rise to geometrical variation (relative to X = H) not only in the benzene ring but also in the bicyclo[2.2.2]octane cage. The two deformations are poorly correlated. The rather small deformation of the benzene ring correlates well with traditional measures of long-range polar effects in bicyclo[2.2.2]octane derivatives, such as sigma(F) or sigma(I) values. The much larger deformation of the bicyclo[2.2.2]octane cage is controlled primarily by the electronegativity of X, similar to deformation of the benzene ring in Ph-X molecules. Thus the field and electronegativity effects of the substituent are well separated and can be studied simultaneously, as they act on different parts of the molecular skeleton.     

Modulation of hydrophobic effect by cosolutes

This work concerns a comparison of the hydration properties and self-association behavior in aqueous solution of three biologically relevant simple molecules: tert-butyl alcohol (TBA), trimethylamine-n-oxide (TMAO), and glycine betaine (GB). These molecules were used as a model to study hydrophobic behavior in water solutions. In particular, water perturbation induced by TBA, TMAO, and GB molecules was studied as a function of the solute molar fraction X(2) (0 < X(2) < 0.04) by Raman spectra of water in the fundamental OH-stretching region (3,800-2,800 cm(-1)). Furthermore, possible hydrophobic clustering of these molecules was investigated by studying the behavior of the alkyl CH stretching band in the 3,100-2,900 cm(-1) frequency region as a function of X(2). To establish the existence of a correlation between the effects of these three solutes on the micellization process and changes in the properties of the solvent, the behavior of the critical micelle concentration of sodium dodecyl sulfate was also investigated as a function of the added amount of TBA, TMAO, and GB. On the whole, these data show that there is no direct correlation between a solute's effect on the water structure and its effect on micelle or protein stability. Results indicate that, while TBA starts to self-aggregate at approximately X(2) = 0.025, both TMAO and GB do not exhibit any significant self-aggregation up to the highest concentration considered. In addition, nonadditive perturbations of the H-bonded networks of solvent water are observed in the case of TBA solutions, but are absent in both the TMAO and GB cases. The absence of these nonlinear effects in TMAO and GB water solutions allow for tracing the microscopical mechanism of the neutrality of these osmolytes toward hydrophobic effects. This confers the compatibility to these two osmolytes, which can be accumulated at high concentrations without interfering with biochemical processes in the cell.     

Aflatoxin M1 determination in cheese by liquid chromatography-tandem mass spectrometry

A new method for determining aflatoxin M1 (AFM1) in cheese by liquid chromatography-tandem mass spectrometry has been developed. Two methodologies were compared for sample extraction. The first one involves sample extraction with dichloromethane for hard, aged cheese or acetone for fresh cheese and includes a preliminary matrix solid-phase dispersion-extraction step before solid-phase extraction (SPE) clean-up by a Carbograph-4 cartridge. The second method uses a water/methanol solution (90:10, v/v) extraction at 150 degrees C before clean-up. The average recoveries of AFM1 from samples spiked at levels of 0.25-0.45 microg/kg, were 81-92% and the precision (RSD) ranged from 3 to 7% with the first method, whilst the average recoveries were 79-84%, and RSD ranged from 7 to 15% for the second method. Due to different matrix effect, the quantification limits were 0.019-0.025 microg/kg in the first case and 0.048-0.143 microg/kg in the second one, depending on cheese typology.     

Determination of aflatoxins in hazelnuts by various sample preparation methods and liquid chromatography-tandem mass spectrometry

A sensitive and reliable liquid chromatography-tandem mass spectrometric with electrospray ionization method for determining aflatoxins in hazelnuts has been developed. Three different extraction techniques, such as homogenization, ultrasonic extraction, and matrix solid phase dispersion have been tested and compared in terms of recovery, matrix effect, accuracy and precision. Ultrasound extraction was the most performing sample preparation method. Absolute recoveries for analytes and I.S. ranged from 93 to 101%. Accuracy and precision were calculated using matrix matched calibration, and ranged 91-102% and 2-11%, respectively. CC alpha and CC beta for aflatoxin B1 (EU limit=2 microg/kg) were 2.15 and 2.33 microg/kg, respectively. A ruggedness test performed on three other matrices demonstrated that sonication time was critical and a matrix matched calibration must be constructed for every sort of matrix.     

Fabrication, structural characterization, and applications of langmuir and langmuir-blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO(2) in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed "clean method" and the polymers obtained are named "NIPUs" (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per mer unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.     

Comparison of the molecular structures of five benzene derivatives as determined independently by gas-phase electron diffraction in two different laboratories: a perspective

The merits and limitations of gas-phase electron diffraction as a technique for determining accurately the structures of small organic molecules are demonstrated by comparing the molecular structures of five benzene derivatives studied in two different laboratories. The existence of many possible representations of the structure of a molecule (r _a, r _g, r _α, r _α⁰, r _e, …), implying differences in the physical meaning of geometrical parameters, is discussed in some detail as it may cause difficulties in a comparison. Also illustrated are different ways of estimating and expressing uncertainties in the geometrical parameters from a gas-phase electron diffraction study.     

Substrates for flexible electronics: A practical investigation on the electrical,film flexibility,optical, temperature,and solvent resistance properties

Designing and developing flexible electronics requires a thorough investigation of the substrates available for the fabrication of devices. Here, we present a practical study on a variety of significant substrates: polyethylene terephthalate (PET), its heat‐stabilized (HS) derivative, HS‐PET, and polyethylene naphthalate (PEN) plastic insulating films; indium tin oxide (ITO)‐coated ITO/PEN and ITO/PET transparent conducting films; rigid ITO/glass and FTO/glass substrates; stainless steel and titanium foils. We put the substrates through a range of tests these actually undergo during device fabrication to determine their optical, mechanical flexibility (under different types of tensile and compressive stress bending with and without a PEDOT:PSS conducting polymer layer), solvent resistance, stability to temperature treatment (conductivity and deformation), and to UV irradiation. We highlight issues and propose solutions to improve substrate response. The results and thresholds extracted reveal limitations and windows of opportunity useful for the designer of flexible optoelectronics in determining manufacturing processes and the final applications under everyday operation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Electronegativity and resonance parameters from the geometry of monosubstituted benzene rings

Reference values of the structural substituent parameters, S _E and S _R, measuring the electronegativity and resonance effects, respectively, of functional groups (Campanelli et al. J Phys Chem A 107:6429–6440, 2003) have been determined from the benzene ring geometries of 100 Ph–X species, including different conformations of the same molecule. Geometries have been obtained by quantum chemical calculations at the HF/6-31G*, HF/6-311++G**, and B3LYP/6-311++G** levels of theory. The substituent parameters from HF/6-311++G** calculations are in close agreement with those determined at the HF/6-31G* level. Using the B3LYP density functional yields S _E and S _R values which—in general—correlate well with the corresponding HF values. Exceptions occur with some charged groups, and, in the case of S _E, with a few dipolar groups having very high or low electronegativities. S _R values from B3LYP calculations are about 22% smaller than the corresponding HF values. The variations of the benzene ring geometry caused by electronegativity, resonance, and steric effects are illustrated in some detail.     

Synthesis and foaming properties of new anionic surfactants based on a renewable building block: sodium dodecyl isosorbide sulfates

Two agro-based anionic surfactants containing an isosorbide moiety have been synthesized and their amphiphilic properties evaluated. Since isosorbide is now considered as an important platform chemical of the starch industry, these compounds could represent bio-sourced alternatives to the alkyl ether sulfates (notably lauryl ether sulfate, LES) that are based on petroleum-derived ethylene oxides. As isosorbide is an asymmetric diol, two isomers can be prepared (2-O-dodecyl isosorbide sulfate and 5-O-dodecyl isosorbide sulfate) that show significantly different aqueous properties as regards to their Krafft temperatures and critical micellar concentrations. 5-O-dodecyl isosorbide sulfate is the most soluble and the most efficient surfactant. It possesses a much lower critical micelle concentration (cmc) than sodium dodecyl sulfate, SDS, leading to comparable foaming properties with a three times lower concentration. Its behavior compares well with the one of pure diethoxylated dodecyl sulfate that has also been prepared and evaluated in this work.