Atomistic modeling of segregation and bulk ordering in Ag-Au alloys

The bulk and surface properties of Ag-Au alloys, for the whole range of concentration and as a function of temperature, is studied by means of a simple modeling scheme using the Bozzolo-Ferrante-Smith method for alloys. Evidence for short-range order is found and explained, as well as its relationship with the experimentally observed segregation behavior.     

Über einige bei einem Polystyren-Film beobachtete Erscheinungen und die daraus gefolgerten Betrachtungen

Zusammenfassung Die Autoren beschreiben verschiedene Versuche mit Streifen, welche in der Walzenrichtung und senkrecht dazu aus einem Polystyrenfilm geschnitten wurden. Die Streifen wurden in unbelastetem Zustand und auch bei verschiedenen Belastungen auf Temperaturen dicht oberhalb 90° C erhitzt. Sie zeigten dabei eine Verkürzung („Racking“), eine Verl?ngerung, oder auch erst eine Verkürzung und danach eine Verl?ngerung. Die ?nderungen der Abmessungen wurden festgelegt, w?hrend auch die Doppelbrechung vor und nach der Erhitzung gemessen wurde. Für die merkwürdigen Erscheinungen wurde eine theoretische Deutung gegeben auf Grund einer Auffassung von dem Bau der Gele, welche als eine Synthese einer erweiterten „Fransentheorie“ und einer „kinetischen Theorie“ von diesem Bau zu betrachten ist.     

Ribonucleotide and ribonucleoside determination by ambient pressure ion mobility spectrometry

Detection limits and reduced mobilities for 12 ribonucleotides and 4 ribonucleosides were measured by ambient pressure electrospray ionization-ion mobility spectrometry (ESI-IMS). With the instrument used in this study it was possible to separate some of these compounds within mixtures. Detection limits reported for ribonucleotides and ribonucleosides ranged from 15 to 300 pmol and the reduced mobilities ranged from 41 to 56 suggesting that ambient pressure ESI-IMS may be used for their rapid and sensitive separation and detection. This report demonstrates that it was possible to use ion mobility spectrometry (IMS) to obtain a spectrum for the separation of nucleotides and nucleosides in less than 1 min. The application holds great promise for nucleotide analysis in the area of separating DNA fragments in genome sequencing and also for forensics DNA typing examinations used for the identification of blood stains in crime scenes and paternity testing.     

Square wave adsorptive cathodic stripping voltammetry automated by sequential injection analysis Potentialities and limitations exemplified by the determination of methyl parathion in water samples

This paper describes the development and evaluation of a sequential injection method to automate the determination of methyl parathion by square wave adsorptive cathodic stripping voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. Accumulation and stripping steps are made in the sample medium conditioned with 40 mmol L⁻¹ Britton-Robinson buffer (pH 10) in 0.25 mol L⁻¹ NaNO₃. The homogenized mixture is injected at a flow rate of 10 μL s⁻¹ toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode. After a suitable deposition time, the flow is stopped and the potential is scanned from −0.3 to −1.0 V versus Ag/AgCl at frequency of 250 Hz and pulse height of 25 mV. The linear dynamic range is observed for methyl parathion concentrations between 0.010 and 0.50 mg L⁻¹, with detection and quantification limits of 2 and 7 μg L⁻¹, respectively. The sampling throughput is 25 h⁻¹ if the in line standard addition and sample conditioning protocols are followed, but this frequency can be increased up to 61 h⁻¹ if the sample is conditioned off-line and quantified using an external calibration curve. The method was applied for determination of methyl parathion in spiked water samples and the accuracy was evaluated either by comparison to high performance liquid chromatography with UV detection, or by the recovery percentages. Although no evidences of statistically significant differences were observed between the expected and obtained concentrations, because of the susceptibility of the method to interference by other pesticides (e.g., parathion, dichlorvos) and natural organic matter (e.g., fulvic and humic acids), isolation of the analyte may be required when more complex sample matrices are encountered.     

Metastable flow in capillary tubes: An experimental evaluation

This work presents the results of an experimental study with pure refrigerants R-134a and R-600a and refrigerant–oil mixtures flowing through capillary tubes in order to analyse the metastable flow. A large number of experiments were carried out to verify the influence of several variables on the underpressure of vaporization, mainly the inlet subcooling, internal diameter and inlet pressure. Capillary tubes with internal diameter of 0.69 mm and 0.82 mm were tested for condensation temperatures between 40 °C and 50 °C and subcooling degrees between 3 °C and 12 °C. Measurements for oil concentrations of 1% and 3% were conducted and compared with those for pure refrigerant R-134a. The oil influence on the metastable flow was tested and the effect on the underpressure of vaporization is addressed for lower oil concentrations.     

Enantioselective Organocatalytic Diels–Alder Trapping of Photochemically Generated Hydroxy‐o‐Quinodimethanes

The photoenolization/Diels–Alder strategy offers straightforward access to synthetically valuable benzannulated carbocyclic products. This historical light‐triggered process has never before succumbed to efforts to develop an enantioselective catalytic approach. Herein, we demonstrate how asymmetric organocatalysis provides simple yet effective catalytic tools to intercept photochemically generated hydroxy‐o‐quinodimethanes with high stereoselectivity. We used a chiral organic catalyst, derived from natural cinchona alkaloids, to activate maleimides toward highly stereoselective Diels–Alder reactions. An unconventional mechanism of stereocontrol is operative, wherein the organocatalyst is actively involved in both the photochemical pathway, by leveraging the formation of the reactive photoenol, and the stereoselectivity‐defining event.     

FT-Raman spectroscopic study of calcium-rich and magnesium-rich carbonate minerals

Calcium and magnesium carbonates are important minerals found in sedimentary environments. Although sandstones are the most common rock colonized by endolith organisms, the production of calcium and magnesium carbonates is important in survival strategies of organisms and as a source for the removal of oxalate ions. Extremophile organisms in some situations may convert or destroy carbonates of calcium and magnesium, which gives important information about the conditions under which these organisms can survive. The identification on the surface of Mars of 'White Rock' formations, in Juventae Chasma or Sabaea Terra, as possibly carbonate rocks makes the study of these minerals a prerequisite of remote Martian exploration. Here, we show the protocol for the identification by Raman spectroscopy of different calcium and magnesium carbonates and we present a database of relevance in the search for life, extinct or extant, on Mars; this will be useful for the assessment of data obtained from remote, miniaturized Raman spectrometers now proposed for Mars exploration.     

Synthesis, crystal structures and magnetic properties of M(II)Cu(II) chains (M = Mn and Co) with sterically hindered alkyl-substituted phenyloxamate bridging ligands

A series of neutral oxamato‐bridged heterobimetallic chains of general formula [MCu(L^x)₂(S)₂] ? p S ? q H₂O [p=0–1, q=0–2.5; L¹=N‐2,6‐dimethylphenyloxamate, S=DMF with M=Mn ( 1 a ) and Co ( 1 b ); L²=N‐2,6‐diethylphenyloxamate, S=DMF with M=Mn ( 2 a ) and Co ( 2 b ) or S=DMSO with M=Mn ( 2 c ) and Co ( 2 d ); L³=N‐2,6‐diisopropylphenyloxamate, S=DMF with M=Mn ( 3 a ) and Co ( 3 b ) or S=DMSO with M=Mn ( 3 c ) and Co ( 3 d )] were prepared by treating the corresponding anionic oxamatocopper(II) complexes [Cu(L^x)₂]^2? (x=1–3) with M²⁺ cations (M=Mn and Co) in DMF or DMSO as the solvent. The single‐crystal X‐ray structures of 2 a and 3 a reveal the occurrence of well‐isolated, zigzag, oxamato‐bridged manganese(II)–copper(II) chains. The intrachain Cu ??? Mn distances across the oxamato bridge are 5.3761(7) and 5.4002(17) Å for 2 a and 3 a , respectively, whereas the shortest interchain Mn ??? Mn distances are 9.4475(16) and 8.1649(14) Å for 2 a and 3 a , respectively. All of these M^IICu^II chains (M=Mn and Co) exhibit 1D ferrimagnetic behaviour with moderately strong intrachain antiferromagnetic coupling between the square‐planar Cu^II and octahedral high‐spin M^II ions across the oxamato bridge [?J=31.4–35.2 and 33.4–44.8 cm^?1, respectively; H =∑_i?J S _M,i( S _Cu,i+ S _Cu,i?1)]. Only the Co^IICu^II chains show slow magnetic relaxation effects characteristic of single‐chain magnets (SCMs). Analysis of the magnetic relaxation dynamics of 3 d shows a thermally activated mechanism (Arrhenius law dependence) with values of the pre‐exponential factor (τ₀=2.6×10^?9 s) and activation energy (E_a=7.7 cm^?1) that are typical of SCMs. In contrast, two relaxation regimes are observed for 2 d in different temperature regions (τ₀=3.2×10^?10 s and E_a=24.7 cm^?1 for T<4.5 K and τ₀=3.2×10^?14 s and E_a=37.5 cm^?1 for T>4.5 K).     

Computational Prediction of 1H and 13C NMR Chemical Shifts for Protonated Alkylpyrroles: Electron Correlation and Not Solvation is the Salvation

Prediction of chemical shifts in organic cations is known to be a challenge. In this article we meet this challenge for α-protonated alkylpyrroles, a class of compounds not yet studied in this context, and present a combined experimental and theoretical study of the ¹³C and ¹H chemical shifts in three selected pyrroles. We have investigated the importance of the solvation model, basis set, and quantum chemical method with the goal of developing a simple computational protocol, which allows prediction of ¹³C and ¹H chemical shifts with sufficient accuracy for identifying such compounds in mixtures. We find that density functional theory with the B3LYP functional is not sufficient for reproducing all ¹³C chemical shifts, whereas already the simplest correlated wave function model, Møller–Plesset perturbation theory (MP2), leads to almost perfect agreement with the experimental data. Treatment of solvent effects generally improves the agreement with experiment to some extent and can in most cases be accomplished by a simple polarizable continuum model. The only exception is the NH proton, which requires inclusion of explicit solvent molecules in the calculation.     

Synthesis,Characterization, and Optimization Studies of Starch/Chicken Gelatin Composites for Food-Packaging Applications

The indiscriminate use of plastic in food packaging contributes significantly to environmental pollution, promoting the search for more eco-friendly alternatives for the food industry. This work studied five formulations (T1–T5) of biodegradable cassava starch/gelatin films. The results showed the presence of the starch/gelatin functional groups by FT-IR spectroscopy. Differential scanning calorimetry (DSC) showed a thermal reinforcement after increasing the amount of gelatin in the formulations, which increased the crystallization temperature (Tc) from 190 °C for the starch-only film (T1) to 206 °C for the film with 50/50 starch/gelatin (T3). It also exhibited a homogeneous surface morphology, as evidenced by scanning electron microscopy (SEM). However, an excess of gelatin showed low compatibility with starch in the 25/75 starch/gelatin film (T4), evidenced by the low Tc definition and very rough and fractured surface morphology. Increasing gelatin ratio also significantly increased the strain (from 2.9 ± 0.5% for T1 to 285.1 ± 10.0% for T5) while decreasing the tensile strength (from 14.6 ± 0.5 MPa for T1 to 1.5 ± 0.3 MPa for T5). Water vapor permeability (WVP) increased, and water solubility (WS) also decreased with gelatin mass rising in the composites. On the other hand, opacity did not vary significantly due to the films’ cassava starch and gelatin ratio. Finally, optimizing the mechanical and water barrier properties resulted in a mass ratio of 53/47 cassava starch/gelatin as the most appropriate for their application in food packaging, indicating their usefulness in the food-packaging industry.