Differential pulse polarographic determination of salicylaldehyde as its Girard-P derivative

A method for the determination of salicylaldehyde (2 × 10^–6–10^–4 M) by differential-pulse polarography, based on the in situ formation of its Girard-P derivative in aqueous solution at pH 2.5, is proposed. The relative standard deviation was 1.5% (ten determinations of 4 × 10^–5 M level). The applicability of this method was checked in synthetic samples containing salicyl alcohol,o-aminophenol, 2-methylphenol, salicylic acid and 4-aminobenzoic acid.     

Stability study of simvastatin under hydrolytic conditions assessed by liquid chromatography

In this work, a liquid chromatography stability-indicating method was developed and applied to study the hydrolytic behavior of simvastatin in different pH values and temperatures. The selected chromatographic conditions were a C18 column; acetonitrile-28 mM phosphate buffer solution, pH 4 (65 + 35) as the mobile phase; 251 degrees C column temperature; and flow rate 1 mL/min. The developed method exhibited an adequate repeatability and reproducibility (coefficient of variation 0.54 and 0.74%, respectively) and a recovery higher than 98%. Furthermore, the detection and quantification limits were 9.1 x 10(-7) and 2.8 x 10(-6) M, respectively. The degradation of simvastatin fitted to pseudo-first order kinetics. The degradation was pH dependent, being much higher at alkaline pH than at acid pH. Activation energy, kinetic rate constants (k) at different temperatures, the half life (t1/2) and the time for 10% degradation to occur (t90) values are also reported.     

Spectroscopic investigation of the adsorption and oxidation of thiourea on polycrystalline Au and Au(111) in acidic media

In the present paper, a systematic electrochemical investigation on thiourea (TU) electrooxidation was developed on polycrystalline and (111) single-crystal gold electrodes in 0.1 M perchloric acid. The combination of cyclic voltammetry with in situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry techniques have allowed the nature of the species formed during the electroadsorption and electrooxidation of TU to be established. FTIRS experiments were performed in D2O to clean up the region of the H2O bending around 1600 cm(-1). It was concluded that TU adsorbs tilted on the surface in the 0.05-0.40 VRHE potential range. A dual-path reaction mechanism was evidenced in the oxidation process. The first pathway takes place from adsorbed TU at E > 0.40 VRHE and implies the formation of [Au(I)-(TU)2]+, which is oxidized to NH2CN and S0 at E > 0.80 VRHE. In a following oxidation step at E > 1.20 V, N2, CO2, and HSO4-/SO4(2-) were produced. The second parallel reaction occurs from TU in solution at E > 0.50 VRHE to form (TU)2(2+). All these species were characterized from the spectroscopic experiments. Similar results were obtained for both surfaces.     

X-Ray Powder Diffraction Studies of Polyhydrates of Cross-Linked Tetraisoamylammonium Polyacrylates

X-ray powder diffraction studies were performed of the polyhydrates, formed at positive temperature in swelled grains of carboxylic cation-exchange resins in the form of tetraisoamylammonium (cross-linked tetraisoamylammonium polyacrylates, differing in the degree of cross-linking: 1, 2 and 3%). It was shown that the polyhydrates exist as the crystalline phase under specific conditions, determined earlier by DTA technique. Diffraction patterns of the samples, recorded at the temperature +3 ± 1 °C, indicate that the polyhydrates crystallize in hexagonal symmetry, the unit cell parameters are close to a=12.25 Å, c=12.72 Å and do not depend significantly upon the degree of cross-linking. The suppositions were made concerning the size of hydrate crystallites, formed in the swelled grains of the studied resins.This revised version was published online in July 2005 with a corrected issue number.     

Determination of formation constants of hydroxo and carbonate complexes of Pr(3+) in 2 M NaCl at 303 K

The hydrolysis of praseodymium III in 2 M sodium chloride at 303 K was studied. Two methods were used: pH titration followed by a computational refinement and solvent extraction in the presence of a competitive ligand. The hydrolysis constants obtained by pH titration were: logbeta(1,H)=-7.68+/-0.07, logbeta(1,2H)=-15.10+/-0.03, and beta(1,3H)=-23.80+/-0.04. The stability constants of praseodymium carbonate complexes were determined by pH titration as well and were: logbeta(1,CO(2-)(3))=5.94+/-0.08 and logbeta(1,2CO(2-)(3))=11.15+/-0.15. Praseodymium carbonate species were taken into consideration for calculating the first hydrolysis constants by the solvent extraction method and the value obtained was: logbeta(1,H)=-7.69+/-0.27. The values for logbeta(1,H) attained by both methods are the same. The species-distribution diagram was obtained from the stability constants of praseodymium carbonate complexes and hydrolysis products in the conditions of the present work.     

Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.     

Nucleocyclitols. Synthesis of substituted purinyl-muco-inositol derivatives

Several carbocyclic nucleoside analogs possessing a 6-substituted purine linked to a mesylated muco-inositol were synthesized. The coupling of triethylamine-activated 6-chloropurine with 2,3-anhydro-l,5,6-tri-O-(methanesulfonyl)-epi-inositol gave a 6-chloro purinyl muco-inositol amenable to further synthetic transformations in the heterocyclic moiety by substitution of the chlorine atom by nitrogen nucleophiles such as methylamino, diethylamino, benzylamino, hydrazino, morpholino, hydroxylamino, piperidino, and glycyl groups.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

Micellar ultrafiltration preconcentration of strontium by anionic micellar solution

Th anionic micellar system of the sodium dodecylsulphate (SDS) with di-2-ethylhexylphosphoric acid (D2EHPA) chelating ligand reagent in acctate buffer solutions was studied. The influence of the concentration and the composition of the micellar system for strontium preconcentration was determined. Different pH values of solutions as well as different concentration ratios of the ligand to the surfactant were used.