Ratiometric fluorescent Zn chemosensor constructed by appending a pair of carboxamidoquinoline on 1,2-diaminocyclohexane scaffold

By appending a pair of carboxamidoquinoline pendants onto 1,2-diaminocyclohexane scaffold via N-alkylation, multifunctionalized ACAQ was designed and synthesized as a water soluble fluorescent ratiometric chemosensor for Zn²⁺. In 50% aqueous methanol buffer pH 7.4 solution, upon excitation at 316 nm, ACAQ (5 μM) displayed a selective ratiometric fluorescence changes with a shift from 410 to 490 nm in response to the interaction with Zn²⁺. After binding with 1 equiv of Zn²⁺, ACAQ exhibited a 12-fold enhancement in I₄₉₀/I₄₁₀ characterized by a clear isoemissive point at 440 nm. The metal sensor binding mode was established by Job’s plot and the combined fluorescence and ¹H NMR spectroscopic method. The selectivity of the probe toward biological relevant cations and transition metal ions was proven to be good. In addition, the interference caused by Cu²⁺ and Cd²⁺ in the quantitation of Zn²⁺ can be completely eliminated by the use of diethyldithiocarbamate as the screening agent. Exploitation of ACAQ as the sensing probe, ratiometric determination of Zn²⁺ with the limit of detection (LOD) at 28.3 nm can be realized. In addition, the unique responsive properties of the probe toward Fe³⁺ and Zn²⁺ were used to construct a fluorescent switch. The membrane permeability of ACAQ to living cells and bio-imaging of Zn²⁺ were demonstrated.     

Several convenient methods for the synthesis of 2-amido substituted furans

Several new methods for the synthesis of differently substituted 2-amidofurans are described. The thermolysis of furan-2-carbonyl azide results in a Curtius rearrangement and the resulting furanyl isocyanate was trapped with various organometallic reagents. A second method consists of a C-N cross-coupling reaction of a bromo-substituted furan with various amides, carbamates, and lactams. The CuI-catalyzed cross-coupling reaction between furanyl bromides and amides furnished 2- and 3-substituted amidofurans in 45-95% yield. The third protocol used involves the reaction of cyclic carbinol amides with triflic anhydride. The reaction proceeds under very mild conditions to provide alpha-(trifluoromethyl)sulfonamido-substituted furans in high yield. The resulting iminium ion derived from the reaction of the hydroxy pyrrolidinone with Tf(2)O undergoes a facile ring opening as a consequence of the adjacent hydroxyl group to produce an imino triflate intermediate. Subsequent cyclization of this highly electrophilic imine with the oxygen atom of the adjacent carbonyl group leads to an imino dihydrofuran that reacts further with another equivalent of Tf(2)O to give the observed product.     

Increasing the solubility of strong reducing agents containing Mo(2)(4+) units and alkyl-substituted guanidinate ligands

Six very soluble paddlewheel compounds containing Mo(2)(n+) units, n = 4, 5, 6, and two alkyl-substituted bicyclic guanidinate ligands have been synthesized. The quadruply bonded complexes with n = 4, Mo(2)(TMhpp)(4) and Mo(2)(TEhpp)(4), (TMhpp = the anion of 3,3,9,9-tetramethyl-1,5,7-triazabicyclo[4.4.0]dec-4-ene and TEhpp = the anion of 3,3,9,9-tetraethyl-1,5,7-triazabicyclo[4.4.0]dec-4-ene) are easily oxidized. The electrode potentials in THF are -1.08 and -1.17 V vs. Ag/AgCl, respectively, for the Mo(2)(5+/4+) couple. These potentials are in accord with the low ionization potentials for the quadruply bonded compounds. Because of the high solubility of the Mo(2)(4+) compounds in most common organic solvents they are attractive candidates for use as strong reducing agents in homogeneous systems.     

Aromatic Polynitro Ether Derivatives of Cellulose

The nucleophilic reaction of sodium cellulosate in the form of membrane or cotton fabric with 2, 4-dinitrohalo-benzenes, 2, 4, 6-trinitrochlorobenzene, 2, 4, 6-trinitrobenzyl bromide, and 2, 4, 6-trinitrostyrene was investigated. The degree of substitution attained with the dinitroaryl derivatives was much higher than that with the trinitroaryl derivatives. The reaction proceeded through Meisen-heimer complexes, which in the case of the trinitro derivatives could be isolated. The ability of the polynitro phenyl ether derivatives of the cellulose to form n- and π-complexes was investigated using naphthalene and p-toluidine. No -π- complex was formed with the former, and the latter gave complexes only with the 2, 4, 6-trinitrobenzyl or -phenethyl cellulose derivatives but not with the trinitrophenyl. The results were explained as due to steric hindrance from the polymeric cellulosic backbone.     

A One‐Pot Organometallic Route from a 4‐Alkenylpyridine to a 4,4‐Spiro‐Linked Ethyl 1,4‐Dihydropyridine‐1‐carboxylate

In a one‐pot process without isolation of intermediates, (but‐3‐en‐1‐yl)pyridine ( 13 ) is treated sequentially with dicyclohexylborane, trimethylaluminium, and ethyl carbonochloridate yielding ethyl 1,4‐dihydro‐4,4‐(tetramethylene)pyridine‐1‐carboxylate (=ethyl 8‐azaspiro[4.5]deca‐6,9‐diene‐8‐carboxylate; 2 ) in 46% yield based on starting alkenylpyridine 13 (Scheme 5).     

An efficient chiral phosphorus derivatizing agent for the determination of the enantiomeric excess of chiral alcohols and amines by 31P NMR spectroscopy

The chiral phosphorus derivatizing agent (CDA) 1 was prepared from optically pure (S)‐1,1‐bis‐2‐naphthol. It was first used in the determination of the enantiomeric excess of chiral alcohols and amines by means of ³¹P NMR spectroscopy. It showed that, for the chiral aromatic alcohols, no apparent kinetic resolution was noted and good base‐line separation was observed. Furthermore, the chemical shift difference (Δδ) of ³¹P NMR spectroscopy was much larger than those determined by the use of other chiral phosphorus derivatizing agents reported previously. However, for aliphatic alcohols, it showed not only obvious kinetic resolutions but incomplete base‐line separation. Moreover, we also found that the use of CDA 1 was suitable for the determination of enantiomeric excess of chiral primary amines. © 2002 John Wiley & Sons, Inc. Heteroatom Chem 13:93–95, 2002; DOI 10.1002/hc.10018     

HPTLC Investigation of a Ring-Like Discoloration of Pedunculate Oak (Quercus robur L.) Heartwood

JPC – Journal of Planar Chromatography – Modern TLC - Discoloration of industrially important woods causes substantial economic loss. Although color defects are not always associated...     

Unravelling Enzymatic Features in a Supramolecular Iridium Catalyst by Computational Calculations

Non-biological catalysts following the governing principles of enzymes are attractive systems to disclose unprecedented reactivities. Most of those existing catalysts feature an adaptable molecular recognition site for substrate binding that are prone to undergo conformational selection pathways. Herein, we present a non-biological catalyst that is able to bind substrates via the induced fit model according to in-depth computational calculations. The system, which is constituted by an inflexible substrate-recognition site derived from a zinc-porphyrin in the second coordination sphere, features destabilization of ground states as well as stabilization of transition states for the relevant iridium-catalyzed C−H bond borylation of pyridine. In addition, this catalyst appears to be most suited to tightly bind the transition state rather than the substrate. Besides these features, which are reminiscent of the action modes of enzymes, new elementary catalytic steps (i. e. C−B bond formation and catalyst regeneration) have been disclosed owing to the unique distortions encountered in the different intermediates and transition states.     

Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.     

Dinuclear complexes with a μ-cyano ligand. Part XI(1). Synthesis and characterization of several derivatives ofcis-[Co(NH3)(en)2(H2O)]3+

Summary The new complex double saltscw-[Co(NH₃)(en)₂(H₂O)]₂ [M(CN)₄]₃ (en = ethylenediamine; M = Ni, Pd or Pt),cis-[Co(NH₃(en)₂(H₂O)]₂[FeNO(CN)₅]₃ andcis-[Co(NH₃)(en)₂(H₂O)][Co(CN)₆] have been synthesized and by anation in the solid state the corresponding new dinuclear complexes with a cyano bridgecis- ortrans-[(NH₃)(en)₂Co-NC-M(CN)₃]₂ [M(CN)₄] (M = Ni, Pd or Pt);cis-, trans-[(NH₃)(en)₂Co-NC-FeNO(CN)₄]₂[FeNO(CN)₅] andcis-[(NH₃)(en)₂Co-NC-Co(CN)₅ have been prepared. The complexes have been characterized by chemical analysis, t.g. measurements, and by i.r. and electronic spectroscopy. With [Ni(CN)₄][^2– and [Co(CN)in]₆ ^3– only thecis-isomer is produced; with [Pd(CN)₄]^2–, [Pt(CN)₄]^2– and [FeNO(CN)₅]^2– thetrans- isomer is the dominant species. The dinuclear complex derived from [Pt(CN)₄]^2– shows strong Pt-Pt interactions both in the solid state and in solution.