Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

A robust multisyringe system for process flow analysis. Part II. A multi-commuted injection system applied to the photometric determination of free acidity and iron(III) in metallurgical solutions

A new software-controlled volume-based system for sample introduction in process flow injection analysis was developed. By using a multi-syringe burette coupled with one or two additional commutation valves, the multi-commuted injection of precise sample volumes was accomplished. Characteristics and performance of the injection system were studied by injecting an indicator in a buffered carrier. Three configurations were implemented in order to achieve two different tasks: the single injection of a sample in a two- or three-channels manifold, and the dual injection into different streams. The two channel flow system using the single injection was applied to the determination of free acidity in diluted samples containing high levels of iron(III), by employing the single point titration methodology. The precipitation of ferric hydroxide was prevented using the ammonium and sodium salts of oxalate and acetate as buffer titrant. Methyl Red was employed as indicator. The procedure allows determination of acid concentration in solutions with a Fe(III)/H+ molar ratio up to 0.2. Samples with higher Fe(III)/H+ molar ratios were spiked with a known strong acid at dilution. The three-channel configuration was applied to the determination of ferric ions, using, as reagent, a merging mixture of sulfuric acid and potassium thiocyanate. The double injection system was implemented in series in a single (three-channel) manifold in such a way that a different injection volume and a changed reagent were used for each analyte. It was applied to the separated or sequential determination of free acidity and ferric ions. In this configuration, iron(III) was determined using 0.5-0.7% (w/v) sodium salicylate solution as reagent. The systems can operate at up to 100, 84 and 78 injections per hour, respectively. Determinations on synthetic and process samples compared well with the reference values and procedures. Recoveries of 95-102% with a maximum RSD value of 5.4% were found for acidity. The respective values obtained for iron determinations were 96-105% and 4.3%.     

Fused heterocycles,VI: Reactions of 3-arylidenechromanones and -1-thiochromanones with thiourea

Summary Reactions of 3-arylidenechromanones (1 – 4) and -1-thiochromanones (5 – 8) with thiourea gave thiazines (9 – 16) under acidic and pyrimidine derivatives (17 – 21) under alkaline reaction conditions

---

Kondensierte Heterocyclen, VI: Umsetzungen von 3-Arylidenchromanonen und-1-thiochromanonen mit Thioharnstoff

Zusammenfassung Die Umsetzung von 3-Arylidenchromanonen1 – 4 und -1-thiochromanonen5 – 8 mit Thioharnstoff liefert unter sauren Bedingungen die Thiazine9 – 16 und in basischem Milieu die Pyrimidine17 – 21.

     

Reaction products of W(CO)(6) with formamidines; electronic structure of a W(2)(mu-CO)(2) core with unsymmetric bridging carbonyls

Reactions of W(CO)(6) with formamidines contrast with those of Mo(CO)(6) and Cr(CO)(6) in that the former do not yield quadruply bonded dimetal species. From the reaction of W(CO)(6) with HDAniF (HDAniF = N,N'-di-p-anisylformamidine), several new ditungsten carbonyl compounds (W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(2) (1), W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(eta(2)-CH(2)DAniF) (2), and W(2)(mu-CO)(mu-CNC(6)H(4)OCH(3))(mu-DAniF)(2)(eta(2)-DAniF)(2) (3)) have been isolated and fully characterized. In 2, CH(2)DAniF represents a DAniF ligand in which a methylene group has been added to one of the nitrogen atoms. This ligand binds to the tungsten atom using a nitrogen and a carbon atom. Compound 1 has a tungsten-tungsten bond distance of 2.476(1) A and a planar W(2)(mu-CO)(2) core structure which has C(2)(h)() symmetry with short and long W-C bond distances (1.99(1) and 2.28(1) A, respectively). DFT calculations on a model of 1 indicate that (a) the C(2)(h)() instead of D(2)(h)() symmetry of the ditungsten core may be attributed to W --> CO pi back-bonding interactions and (b) the bond between the tungsten atoms may be formulated as a double bond. The new tetragonal paddlewheel compound W(2)(DAniF)(4) (4) and the edge-sharing bioctahedron W(2)(mu-O)(mu-NC(6)H(3)Cl(2))(mu-D(Cl)PhF)(2)(eta(2)-D(Cl)PhF)(2) (5) (D(Cl)PhF = N,N'-di-(3,5-dichlorophenyl)formamidinate) have also been prepared.     

Phenylsulfonyl ene-allenes as efficient precursors to bicyclic systems via intramolecular [2 + 2]-cycloaddition reactions

Various phenylsulfonyl allene derivatives were prepared with double bonds tethered either to the alpha-position or the gamma-position of the allene. These substrates underwent a highly regio- and stereospecific thermal [2 + 2]-cycloaddition across the nonactivated cumulene double bond, forming distal cycloadducts (i.e., 57) in the case of alpha-tethered allenes and proximal adducts (i.e., 25) in the case of gamma-tethered allenes. The mechanistic rationale for the observed stereospecificity involves initial diradical formation, followed by a rapid ring closure to the more stable cis-fused ring system. The tether may be equipped with heteroatoms, allowing for the formation of fused heterocycles (e.g., 61), and the cycloaddition can be facilitated by the introduction of sterically bulky groups and/or by conformational rigidity to the tether. Other modes of cyclization were observed in the presence of sodium benzenesulfinate or Lewis acids, in which cases polar mechanisms prevail. The chemoselectivity is reversed for [4 + 2]-cycloadditions, which prefer instead to engage the vinyl sulfone moiety, independent of whether the tether is attached to the alpha- or gamma-position of the allene.     

Factors affecting gas-phase deuterium scrambling in peptide ions and their implications for protein structure determination

In this report, we evaluate the validity of using hydrogen/deuterium exchange in combination with collision-induced dissociation mass spectrometry (CID MS) for the detailed structural and conformational investigation of peptides and proteins. This methodology, in which partly deuterated peptide ions are subjected to collision-induced dissociation in the vacuum of a mass spectrometer, has emerged as a useful tool in structural biology. It may potentially provide quantitatively the extent of deuterium incorporation per individual amino acid in peptides and proteins, thus providing detailed structural information related to protein structure and folding. We report that this general methodology has limitations caused by the fact that the incorporated deuterium atoms migrate prior or during the CID MS analysis. Our data are focused on a variety of transmembrane peptides, incorporated in a lipid bilayer, in which the near-terminal amino acids that anchor at the lipid-water interface are systematically varied. Our findings suggest that, under the experimental conditions we use, the extent of intramolecular hydrogen scrambling is strongly influenced by experimental factors, such as the exact amino acid sequence of the peptide, the nature of the charge carrier, and therefore most likely by the gas-phase structure of the peptide ion. Moreover, the observed scrambling seems to be independent of the nature of the peptide fragment ions (i.e., protonated B and Y' ' ions, and sodiated A and Y' ions). Our results strongly suggest that scrambling may be reduced by using alkali metal cationization instead of protonation in the ionization process.     

Collisionally induced dissociation mass spectrometric studies of perfluorinated 1H-heptane,tert-butanol, 2-butyltetrahydrofuran and isopropyl bromobutyl ether

High-energy collision-activated dissociation in connection with mass-analyzed ion kinetic energy spectrometry (CAD/MIKES) was employed to probe the structures of some ions generated by methane chemical ionization (CI) and negative ion chemical ionization (NICI) of the title compounds. CAD/MIKES results show that the [M ? H]^? ion of lH-perfluorobeptane and the [O(CF₂)₄Br]^? ion of perfluoroisopropylbromobutyl ether are stable. The methane CI of these fluorocarbons also showed that the expulsion of HF molecules appears to be a major driving force for further fragmentations.     

Free-radical pathways in the decomposition of ketones over polycrystalline TiO(2): the role of organoperoxy radicals.

The oxidative decomposition of various ketones (including acetone, 2-butanone, 4-heptanone, cyclopentanone and cyclohexanone) over dehydrated TiO(2) (P25) powder is investigated by electron paramagnetic resonance (EPR) spectroscopy. For the first time, a series of thermally unstable radical intermediates are observed both on the activated and reduced TiO(2) surface, depending on the adopted experimental conditions. These radical intermediates are identified as organoperoxy-based species of general formula ROO(.-) and RCO(3) (.-). They are formed by reaction of photogenerated charge carriers (either trapped electrons or trapped holes) with the adsorbed ketones in the presence of molecular oxygen. The organoperoxy intermediates are thermally unstable and decompose at temperatures in the region of 180-250 K. This work demonstrates that free-radical pathways involving both organoperoxy and superoxide radicals can be responsible for the thermal- and photodecomposition of ketones over polycrystalline TiO(2) (P25).     

Magnetic circular dichroism studies—XLVI: Structure and the magnetic circular dichroism of trans-2-decalones and bicyclo[2.2.2]octan-2-ones

The magnetic CD spectra of a number of Me substituted trans-2-decalones and bicyelo[2.2.2]octan-2-ones were measured. The results showed a large, and sometimes dominant, contribution to the MCD intensity which could be correlated with the presence of α-substituents lying outside of the plane of the carbonyl chromophore.     

Aqueous p-nitrotoluene oxidation induced with direct glow discharge plasma

A plasma induced degradation process has been studied to treat 4-nitrotoluene (4-NT) present as an aqueous pollutant. The plasma was locally generated from a glow discharge around a tip of a platinum anode in an electrolytic solution. The influence of initial pH and Fe²⁺ on the degradation was examined. Major intermediates resulting from the degradation process were identified. Amongst the aromatic intermediates, p-hydroxybenzoic acid was the predominant degradation product. The formation of oxalic acid, malic acid was also observed. The final products of degradation were NH ₄ ⁺ , NO ₃ ⁻ and CO₂. Based on the analysis of intermediates and the kinetic considerations, the degradation was shown to follow a pseudo-first order reaction hence, a possible reaction pathway was proposed.