FTIR spectroscopic study on crystallization process of poly(ethylene-2,6-naphthalate)

In situ Fourier transform infrared (FTIR) measurements were carried out to elucidate conformation changes occurring during the isothermal melt crystallization of poly(ethylene-2,6-naphthalate) (PEN). Based on the band assignments for the components of the amorphous, α-crystal form, and β-crystal form of PEN in film samples, the in situ data was analyzed in terms of the amorphous- and crystal-trans conformations. It was observed at a higher isothermal crystallization temperature that the formation of amorphous-trans conformations precedes the growth of crystals. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2741–2747, 1997     

Biodegradation of chitin with enzymes and vital components

Chitin from squid pen was effectively degraded by the chitinase from Bacillus sp. PI-7S, while the degradation of chitin with lysozyme proceeded very slowly. Among the various vital components studied, the degradation of chitin from squid pen was performed not by canine serum, canine tela subcutanea, canine tela liver, and equine serum but by bovine serum and caprine serum. Noteworthy is the fact that chitin sponge subcutaneously implanted in dog reported not to have chitinase was degraded in ca. 14 days.     

Comparison of CO2 Reduction Performance with NH3 and H2O between Cu/TiO2 and Pd/TiO2

The aim of this study is to clarify the effect of doped metal type on CO₂ reduction characteristics of TiO₂ with NH₃ and H₂O. Cu and Pd have been selected as dopants for TiO₂. In addition, the impact of molar ratio of CO₂ to reductants NH₃ and H₂O has been investigated. A TiO₂ photocatalyst was prepared by a sol-gel and dip-coating process, and then doped with Cu or Pd fine particles by using the pulse arc plasma gun method. The prepared Cu/TiO₂ film and Pd/TiO₂ film were characterized by SEM, EPMA, TEM, STEM, EDX, EDS and EELS. This study also has investigated the performance of CO₂ reduction under the illumination condition of Xe lamp with or without ultraviolet (UV) light. As a result, it is revealed that the CO₂ reduction performance with Cu/TiO₂ under the illumination condition of Xe lamp with UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:1:1 while that without UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:0.5:0.5. It is revealed that the CO₂ reduction performance of Pd/TiO₂ is the highest for the molar ratio of CO₂/NH₃/H₂O = 1:1:1 no matter the used Xe lamp was with or without UV light. The molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp with UV light was 10.2 μmol/g, while that for Pd/TiO₂ was 5.5 μmol/g. Meanwhile, the molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp without UV light was 2.5 μmol/g, while that for Pd/TiO₂ was 3.5 μmol/g. This study has concluded that Cu/TiO₂ is superior to Pd/TiO₂ from the viewpoint of the molar quantity of CO per unit weight of photocatalyst as well as the quantum efficiency.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Substituent effects on benzdiyne: a density functional theory study

Density functional theory (DFT) studies were performed to investigate the effect of substituents on the properties of benzdiyne derivatives. Twelve substituted benzdiynes-C(6)X(2), where X = F, Cl, Br, Me, CF(3), CN, OH, NO(2), NH(2), OMe, NMe(2), and Ph-were considered along with the unsubstituted 1,4-benzdiyne. The structures, vibrational frequencies, and IR intensities of these benzdiynes were studied with a popular three-parameter hybrid density functional (B3LYP) combined with the split-valence 6-31G(d) basis set and Dunning's correlation-consistent polarized triple-zeta (cc-pVTZ) basis set. The relative stabilities of the substituted benzdiynes were studied with the help of reaction energies of isodesmic reactions, which showed that the electron-withdrawing groups destabilized the benzdiynes more than they did the corresponding benzenes, whereas the electron-donating groups stabilized the benzdiynes more than they did their benzene counterparts. Correlation analyses revealed that field/inductive effects played a more important role than did resonance effects. The changes in atomic charges and spin populations due to the substituents were also studied. The asymmetric nu(Ctbd1;C) stretching modes obtained were close to the 1500-cm(-)(1) mark. Reinvestigation of the experimental results supported these results; a weak IR band at 1486 cm(-)(1) was assigned to this asymmetric stretching mode in C(6)(CF(3))(2) F. Some other benzdiynes also had large IR intensity values for their asymmetric nu(Ctbd1;C) vibrational modes due to the coupling with other vibrational modes. Heats of formation for the substituted benzdiynes were obtained from the reaction energies calculated at the B3LYP/cc-pVTZ level of theory.     

Identification of Shiga toxins in Shiga toxin-producing Escherichia coli using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry

We developed a rapid and reliable identification method for Shiga toxins in Shiga toxin-producing Escherichia coli (STEC) using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS). Polyclonal antisera specific for Shiga toxin 1 (Stx1) and Shiga toxin 2 (Stx2) were raised in rabbits so as to be used for the immunoprecipitation. The immunoprecipitaion was carried out by mixing sample solutions with 50 microl each of the antisera to Stx1 and Stx2 followed by allowing the mixed solutions to stand for 30 min. The quantity required to obtain the immunoprecipitate was more than 0.5 microg of Shiga toxins. HPLC-ESI-MS analysis of the resulting immunoprecipitates provided accurate molecular weight information on Shiga toxins, leading to direct evidence for the presence of these toxins. It requires at most two days to perform our procedure from toxin extraction to measurement of HPLC-ESI-MS whereas the previous method using isolation procedures required about two weeks to complete. The usefulness of the present method has been demonstrated by identifying Stx1, Stx2 and a variant of Stx2 (Stx2e) in the immunoprecipitates prepared from STEC strains.     

Long-lived charge-separated state leading to DNA damage through hole transfer

The hole transfer causes the long-lived charge-separated state in DNA during the photosensitized one-electron oxidation of DNA. The combination of the transient absorption measurement and DNA damage quantification by HPLC clearly demonstrated that the yield of the DNA damage correlates well with the lifetime of the charge-separated state.     

Mechanism of gold adsorption by persimmon tannin gel.

Gold adsorption by persimmon tannin (PT) gel from a solution containing hydrogen tetrachloroaurate(III) was examined. A flow-rate examination in a column system indicated the reduction of Au(III) ion to Au(0). XRD patterns clarified the existence of Au(0) on the gel which adsorbed gold. The gel could also adsorb colloidal Au(0) prepared independently. A model consisting of ligand exchange, Au(III) reduction to Au(0), and resulting Au(0) adsorption by PT gel was presented for the gold adsorption mechanism.     

Intramolecular cyclization with nitrenium ions generated by treatment of N-acylaminophthalimides with hypervalent iodine compounds: formation of lactams and spiro-fused lactams

N-Phthalimido-N-acylnitrenium ions are generated from N-acylaminophthalimides, a new class of precursors, by treatment with hypervalent iodine compounds (PIFA and HTIB). In HFIP, the nitrenium ions undergo intramolecular electrophilic substitution reactions to afford N-aminonitrogen heterocycles in high yields. In TFEA, spirodienones bearing the 1-azaspiro[4.5]decane skeleton are obtained by treatment of N-phthalimido-3-(4-halogenophenyl)propanamides with HTIB as a result of ipso attack of the intermediate nitrenium ion. Similarly, using PIFA in TFEA, ipso cyclization of unactivated benzenoid compounds occurs to afford spirodiene derivatives. This involves loss of aromaticity despite the absence of other activating substituents on the phenyl group.     

Ketene formation in benzdiyne chemistry: ring cleavage versus Wolff rearrangement

In the chemistry toward generating benzdiyne from five benzenetetracarboxylic dianhydride derivatives, ketene formation was exclusively observed in the photolysis of difluorobenzenetetracarboxylic dianhydride in a nitrogen matrix at 13 K. Two ketenes were formed concomitantly with difluorobenzdiyne. These ketenes were identified on the basis of good agreement between the observed and calculated (B3LYP/6-31G level) IR spectra. Neither ketene contained the five-membered-ring moiety as cyclopentadienylideneketene, which is formed by Wolff rearrangement in the benzyne chemistry. The first generated ketene was assigned to a ketene with a cyclopropene moiety, and the second, to a ketene with a butadiyne moiety. The first generated ketene was a major product in the photolysis and was formed by cleavage of the bond connecting the ketene group and the C-F carbon and not the bond connecting the ketene group and the carbene moiety. Thus the structures of these ketenes indicated that a unprecedented ring cleavage, rather than Wolff rearrangement, is the dominant process in the benzdiyne chemistry.