Polymerization of trimethylene carbonate in aqueous solutions: Reaction mechanism and characterization

Polymerization of a trimethylene carbonate (TMC) in an aqueous solution was investigated by gel permeation chromatography, Fourier transform infrared spectroscopy, and nuclear magnetic resonance. The polymerization reaction proceeded rapidly in the aqueous solution and high conversion was achieved in a relatively short time. 1,3‐Propanediol (PPD) formed by hydrolysis of TMC was used as the initiator. The TMC oligomer obtained by ring‐opening polymerization had a TMC unit backbone with terminal 3‐hydroxypropyl groups at both chain ends. The oligomer underwent transesterification reaction with elimination of PPD, resulting in a gradual increase in the molecular weight of the product. The molecular weight was affected by the concentration of TMC. The thermal properties of the polymers were investigated by differential scanning calorimetry. Polymers within the molecular weight (M_n) range from 6.0 × 10³ to 2.3 × 10⁴ g/mol crystallized, and endothermic peaks corresponding to the melting temperature were observed. The glass transition temperature increased with the molecular weight of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1485–1492, 2010     

Role of methyl radicals in the growth of PAHs

The role of methyl radicals in the networking of sp² carbons has been explored through kinetic analysis of mass spectra of the gas-phase products of the pyrolysis of toluene and toluene/acetone mixtures. Pyrolytic reactions were performed in a flow tube reactor at temperatures of 1140–1320 K and a constant total pressure of 10.38 Torr with a residence time of 0.585 s. On addition of acetone, methyl substituted products and their derivatives were enhanced. Mass peaks were observed in several sequences at an interval of 14 mass units; these ions correspond to methyl substituted products formed as a result of hydrogen abstraction (−H) followed by methyl radical addition (+CH₃). Each major peak was usually preceded by a peak at two mass units lower, which was likely produced through dehydrogenation/dehydrocyclization (−H₂) of methyl substituted products. Detected species include a large number of alkyl, cyclotetrafused (CT), cyclopentafused (CP) mono-, di-, and polycyclic aromatic hydrocarbons (PAHs) along with primary PAHs. The analysis showed that MAC (methyl addition/cyclization) has a unique capacity to induce the sequential growth of hexagonal networks of sp² carbons from all fusing sites [1] of a PAH. Moreover, MAC was found capable of answering an important question in PAH growth, which is expansion of the CT → CP → hexagonal network for which other reported mechanisms are inefficient.     

Synthetic Studies on Sialoglycoconjugates 91: Total Synthesis of Gangliosides GD1C and GT1A

Abstract

A first total synthesis of gangliosides GD1c and GT1a containing Neu5Acα(2→8) Neu5Acα(2→3)Gal residue in their non-reducing terminal is described. Condensation of methyl O-[methyl 5-acetamido-8-O-(5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylono-1¹,9-lactone) -4,7- di-O-acetyl-3,5-dideoxy-D-glycero-α-D-galcto-2-nonulopyranosyranosylanate]-(2→3)-2,4,6-tri-O-benzoyl-1-thio-β-D-gala-ctopyranoside (1) with 2-(trimethylsilyl)ethyl O-(2-acetamido-4,6-O-benzylidene-2-deoxy-β-D-galactopyranosyl)- (1→4) -O -(2,3,6-tri-O-benzyl-β-D-galactopyranosyl)-(1→4)-2,3,6-tri-O-benzyl-β-D-glucopyranoside (2) or 2-(trimethylsilyl)ethyl O-(2-acetamido-6-O-benzyl-2-deoxy-β-D-galactopyranosyl)-(1→4)-(9-[methyl 5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→3)]-O-(2,6-di-O-benzyl-β-D-galactopyranosyl) - (1→4) - 2,3,6-tri-O-benzyl-β-D-glucopyranoside (3) in the presence of dimethyl(methylthio)sulfonium triflate (DMTST) gave the corresponding hexa-and heptasaccharide derivatives 4 and 5, respectively. These oligosaccharides were converted into the α-trichloroacetimidates 10 and 11 via reductive removal of the benzyl groups and/or benzylidene group, O-acetylation, selective removal of the 2-(trimethylsilyl)ethyl group and treatment with trichloroacetonitrile, which, on coupling with 2-azidosphingosine derivatives 12 or 13, gave the β-glycosides 14 and 15, respectively. Finally, 14 and 15 were transformed, via selective reduction of the azido group, coupling with octadecanoic acid and removal of all protecting groups, into the title gangliosides GD1c 18 and GT1a 19.     

Lithiosilanes and their application to the synthesis of polysilane dendrimers

An account is given of the preparation and structural investigations of silyllithium compounds, including X-ray and NMR data. This review covers the chemistry of lithiosilanes with alkyl, aryl, functional substituents and lithiooligosilanes with Si---Si bonds. Application of lithiosilanes for the synthesis of polysilane dendritic molecules is also described.     

Effects of digital processing on repeatability assessment of a multiple reaction monitoring liquid chromatography–tandem mass spectrometry system by ISO 11843-7

ISO 11843 part 7 (ISO 11843-7) can provide a standard deviation (SD) of area measurements of a target peak through the stochastic behaviors of instrumental noises. The purpose of this study is to demonstrate that ISO 11843-7 can be applied to assess repeatability in an isocratic liquid chromatography–tandem mass spectrometry (LC–MS/MS) system without repetitive measurements. The relative standard deviation (RSD) of the peak area of ergosterol picolinyl ester, which was used as an example, on a multiple reaction monitoring (MRM) chromatogram was determined by ISO 11843-7. The RSD by ISO 11843-7 (N = 1) was within a 95% confidence band of the RSD by repetitive measurements (N = 6). Moreover, the effects of digital smoothing, such as moving average, were also examined on the repeatability assessment in LC–MS/MS by ISO 11843-7. From the results of the comparisons of the RSDs obtained by ISO 11843-7 and the repetitive measurements, it was shown that suitable RSDs of the peak area were obtained from the smoothed MRM chromatograms by the moving average for narrow data point windows (e.g., one-sixth of the peak width). In conclusion, the utility of repeatability assessment based on ISO 11843-7 has been expanded for the validation of an LC–MS/MS system.     

The structure of an Al–Rh–Cu decagonal quasicrystal studied by spherical aberration (Cs)-corrected scanning transmission electron microscopy

The structure of an Al–Rh–Cu decagonal quasicrystal formed with two quasiperiodic planes along the periodic axis in an Al₆₃Rh_18.5Cu_18.5 alloy has been studied by spherical aberration (Cs)-corrected high-angle annular detector dark-field (HAADF)- and annular bright-field (ABF)-scanning transmission electron microscopy (STEM). Heavy atoms of Rh and mixed sites (MSs) of Al and Cu atoms projected along the periodic axis can be clearly represented as separate bright dots in observed HAADF-STEM images, and consequently arrangements of Rh atoms and MSs on the two quasiperiodic planes can be directly determined from those of bright dots in the observed HAADF-STEM image. The Rh atoms are arranged in pentagonal tiling formed with pentagonal and star-shaped pentagonal tiles with an edge-length of 0.76 nm, and also MSs with a pentagonal arrangement are located in the pentagonal tiles with definite orientations. The star-shaped pentagonal tiles in the pentagonal tiling are arranged in τ²(τ: golden ratio)-inflated pentagonal tiling with a bond-length of 2 nm. From arrangements of Rh atoms placed in pentagonal tilings with a bond-length of 2 nm, which are generated by the projection of a five-dimensional hyper-cubic lattice, occupation domains in the perpendicular space are derived. Al atoms as well as Rh atoms and MSs are represented as dark dots in an observed ABF-STEM image, and arrangements of Al atoms in well-symmetric regions are discussed.     

The study of Al3(Mn,Pd) crystal and Al–Mn–Pd decagonal quasicrystal by spherical aberration-corrected scanning transmission microscopy and atomic-resolution energy dispersive X-ray spectroscopy

An Al₃Mn-type Al₃(Mn, Pd) crystal and an Al–Mn–Pd decagonal quasicrystal (DQC) in an Al₇₀Mn₂₀Pd₁₀ alloy are studied using a spherical aberration (Cs)-corrected scanning transmission electron microscope (STEM) with high-angle annular dark-field (HAADF) and annular bright-field (ABF) techniques, together with atomic-resolution energy dispersive X-ray spectroscopy (EDS). Mn and Pd atomic positions in the Al₃(Mn, Pd) structure projected along the b-axis (pseudo-tenfold rotational axis) are represented by separate bright dots in observed HAADF-STEM images. Besides, Al as well as Mn and Pd atomic positions are represented as dark dots in ABF-STEM images. Most Mn and Pd atomic positions in the Al₃(Mn, Pd) structure can be observed on atomic-resolution EDS maps. On the basis of the good correlation between the STEM images and the EDS maps, and also considering the structure of the Al₃(Mn, Pd) crystal, which was determined by X-ray diffraction using a single crystal, observed HAADF and ABF-STEM images of the Al–Mn–Pd DQC have been interpreted. Pd and Mn atomic positions in the Al–Mn–Pd DQC can be detected on the observed EDS maps. It can be seen that Pd is enriched around the centre of the columnar clusters, having a decagonal section with 2 nm in diameter. It can therefore be concluded that Pd plays an important role in the stabilization of the decagonal clusters, which form the Al–Mn–Pd DQC structure.