Effect of Initial Cell Concentration on Ethanol Production by Flocculent Saccharomyces cerevisiae with Xylose-Fermenting Ability

Different initial cell concentrations of a recombinant flocculent Saccharomyces cerevisiae MA-R4 were evaluated for their effects on xylose fermentation and glucose–xylose cofermentation. A high initial cell concentration greatly increased both the substrate utilization and ethanol production rates. During xylose fermentation, the highest rates of xylose consumption (2.58 g/L h) and ethanol production (0.83 g/L h) were obtained at an initial cell concentration of 13.1 g/L. During cofermentation, the highest rates of glucose consumption (14.4 g/L h), xylose consumption (2.79 g/L h), and ethanol production (6.68 g/L h) were obtained at an initial cell concentration of 12.7 g/L. However, a high initial cell density had no positive effect on the maximum ethanol concentration and ethanol yield mainly due to the increased amount of by-products including xylitol. The ethanol yield remained almost constant (0.34 g/g) throughout xylose fermentation (initial cell concentration range, 1.81–13.1 g/L), while it was slightly lower at high initial cell concentrations (9.87 and 12.7 g/L) during cofermentation. The determination of the appropriate initial cell concentration is necessary for the improvement of substrate utilization and ethanol yield.     

Investigation of void formation beneath thin AlN layers by decomposition of sapphire substrates for self-separation of thick AlN layers grown by HVPE

Void formation at the interface between thick AlN layers and (0 0 0 1) sapphire substrates was investigated to form a predefined separation point of the thick AlN layers for the preparation of freestanding AlN substrates by hydride vapor phase epitaxy (HVPE). By heating 50–200 nm thick intermediate AlN layers above 1400 °C in a gas flow containing H₂ and NH₃, voids were formed beneath the AlN layers by the decomposition reaction of sapphire with hydrogen diffusing to the interface. The volume of the sapphire decomposed at the interface increased as the temperature and time of the heat treatment was increased and as the thickness of the AlN layer decreased. Thick AlN layers subsequently grown at 1450 °C after the formation of voids beneath the intermediate AlN layer with a thickness of 100 nm or above self-separated from the sapphire substrates during post-growth cooling with the aid of voids. The 79 μm thick freestanding AlN substrate obtained using a 200 nm thick intermediate AlN layer had a flat surface with no pits, high optical transparency at wavelengths above 208.1 nm, and a dislocation density of 1.5×10⁸ cm⁻².     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

Effect of the moisture content in aerosol on the spray performance of Stmerin D HFA preparations

Stmerin D, a pressurized metered dose inhaler (MDI) for treatment of asthma, contains CFCs (chlorofluorocarbons) as a propellant. For the CFC replacement study, two formulations were prepared using hydrofluoroalkanes (HFA-134a and HFA-227) and the effect of storage on the spray performance was investigated under accelerated stress conditions. Drug stability, moisture content and spray performances such as the emitted dose uniformity and aerodynamic particle size distribution were evaluated. Drug content did not change after 3 months storage at 40 degrees C/75% RH. However, the emitted dose uniformity varied and the respirable fraction (RF) was reduced remarkably. While stored at 40 degrees C/ambient for 3 months, no change was observed in either drug content or spray performances. This study clarified that the moisture content in the canister played an important role on the spray performance, and it changed not only the emitted dose uniformity but also the particle size distribution. Consequently, in order to improve the stability of the spray performance of aerosol prepared with HFAs, moisture permeation into the canister must be controlled.     

Synthesis of porous vinylnaphthalene/divinylnaphthalene copolymers and their sorptive properties towards phenol and its derivatives

Four porous vinylnaphthalene/divinylnaphthalene (VN/DVN) polymers having three different nominal crosslinking degrees (60, 80 and 100 wt.%) have been synthesized using the suspension polymerization method in the presence of toluene and decane.The use of various crosslinking levels and inert diluents was aimed at changing the extent of polymeric network-diluent interactions. The resultant polymers have specific surface area in the range 450-700 m²/g depending on the DVN content. Two sets of pores were detected in all resins: one with the diameter of ≈2 nm and the second one in the range of 30-40 nm. Their sorptive properties have been studied using dilute (0.5 mmol/l) solutions of phenol and its derivatives (o-chlorophenol, 2-methylphenol, o-nitrophenol, m-nitrophenol and p-nitrophenol). It has been found that sorption, at low equilibrium concentration, follows the order: o-nitrophenol > o-chlorophenol > m-nitrophenol > o-methylphenol > p-nitrophenol > phenol. Full characteristics of the porous structure of resultant polymers was obtained by nitrogen adsorption at 77 K and their surface properties analyzed using Inverse Gas Chromatography.     

Direct Observation of Ordered High‐Spin–Low‐Spin Intermediate States of an Iron(III) Three‐Step Spin‐Crossover Complex

A neutral mononuclear Fe^III complex [Fe^III(H‐5‐Br‐thsa‐Me)(5‐Br‐thsa‐Me)]?H₂O ( 1 ; H₂‐5‐Br‐thsa‐Me=5‐bromosalicylaldehyde methylthiosemicarbazone) was prepared that exhibited a three‐step spin‐crossover (SCO) with symmetry breaking and a 14 K hysteresis loop owing to strong cooperativity. Two ordered intermediate states of 1 were observed, 4HS–2LS and 2HS–4LS, which exhibited reentrant phase‐transition behavior. This study provides a new platform for examining multistability in SCO complexes.     

Studies on thermal degradation of acrylonitrile–butadiene–styrene copolymer (ABS-Br) containing brominated flame retardant

The thermal degradation of acrylonitrile-butadiene-styrene copolymer (ABS-Br; 10 g) containing brominated flame retardant (Br: 9.59 wt.%) was carried out at 450 °C using a semi batch operation using two different temperature programs. The heating rate was found to affect the quality of the degradation oil and yield of products (liquid, gas and residue). Data on the effect of the temperature program on the accumulation of liquid products was presented. It was found that the majority of the bromine was concentrated in the carbon residue and while majority of the nitrogen accumulates in the liquid products irrespective of degradation mode. The use of a one step constant heating rate process (I) produced a higher liquid yield (39%), than a two step process (29%). Differences were also noted in the Br and N contained in the liquids produced by the two processes.     

Potassium ion-selective membrane electrodes based on naphtho-15-crown-5

The potassium-selective PVC membrane electrodes based on naphtho-15-crown-5 have rapid, stable and Nernstian response in the range 10^-1–10^-5 M. The selectivity coefficient for potassium over sodium is 4 × 10^-4.