Evaluation of supercritical fluid extraction for isotope dilution gas chromatography-mass spectrometric quantification of polychlorinated biphenyls in sediment.

Supercritical fluid extraction (SFE) has been evaluated as an extraction technique for the isotope-dilution quantification of polychlorinated biphenyls (PCBs) in a sediment sample. A high-resolution mass-spectrometric system equipped with a gas chromatograph was employed for the determination of seven target PCB congeners. The effect of the operation parameters on the SFE efficiency was investigated, in which the analytical values of five target PCB congeners significantly increased with increases in the extraction temperature and pressure, and that of 4,4'-dichlorobiphenyl further increased by applying static extraction. The following conditions were found to be optimal: extraction temperature, 140 degrees C; pressure, 30 MPa; time and mode, static for 15 min then dynamic for 30 min. Under these conditions, the addition of modifiers influenced the extraction of polar compounds, but did not affect the analytical values of the PCB congeners. The optimized method was suitable for high-throughput analysis as well as for providing accurate analytical results, which were comparable to or better than the analytical results obtained by Soxhlet extraction.     

Separation and determination of quaternary ammonium compounds by high-performance liquid chromatography with a hydrophilic polymer column and conductometric detection

An HPLC method has been developed for separation and determination of long alkyl chain quaternary ammonium compounds. A column packed with a hydrophilic polymer packing, Shodex Asahipak GF-310 HQ, and a water–acetonitrile mixture containing 4,4′-bipyridyl and hydrochloric acid were used to depress hydrophobic adsorption of the quaternary ammonium compounds and increase the sensitivity of the conductometric detection with a micromembrane suppressor. Dodecyltrimethylammonium, cetyltrimethylammonium, tetradecyldimethylbenzylammonium and stearyltrimethylammonium ions can be completely separated from one another and quantified at 0.1 nmol level.     

Multichannel Spectral Imaging System for Measurements with the Highest Signal-to-Noise Ratio

A multichannel spectral imaging system consisting of dichroic mirrors is proposed. The system is expected to have the highest signal-to-noise ratio (SNR) because of the largest optical throughput realized by the multichannel configurations for both imaging and spectrometry. A multichannel spectral imaging system with eight spectral bands was designed by the evolutionary algorithms and then fabricated. The SNR is studied and compared experimentally with those of other fast spectral imaging techniques. A time-sequence of spectral images of a super-continuum light beam is measured using the present system. The number of spectral channels of the system is limited chiefly by the difficulty in designing the arrangement of dichroic mirrors and the optical performance of those mirrors. These limitations restrict the number of spectral channels to approximately 16 at present.     

Preparation of chiral polystyrene monoliths by utilizing W/O emulsion polymerization and their optical resolution ability

We synthesized two kinds of chiral polystyrene‐based monoliths, which are macroporous gel with continuous open‐celled monolith structure. Thus, two chiral styrene monomers, (–)‐p‐[dimethyl(10‐pinanyl)silyl]styrene ((–)‐PSSt) and (–)‐p‐(menthoxycarbonyl)styrene ((–)‐MtSt]), were prepared and subjected to water‐in‐oil emulsion polymerization in the presence of divinylbenzene and AIBN. The macroporous structure of the obtained monoliths was directly confirmed by SEM observation. The obtained monoliths showed an optical resolution ability. That is, in the enantioselective adsorption using trans‐stilbene oxide, poly[(–)‐PSSt] monolith and poly[(–)‐MtSt] monoliths preferentially adsorbed (S,S)‐isomer [poly[(–)‐PSSt] monolith: α^(S,S) = 1.49 (0.25 wt % acetone solution); poly[(–)‐MtSt] monolith: α^(S,S) = 1.39 (0.25 wt % toluene solution)]. Depinanylsilylation of the poly[(?)‐PSSt] monolith and removal of menthyl groups from the poly[(–)‐MtSt] monolith were achieved by acid‐catalyzed scission of the Si? C bond and base‐catalyzed hydrolysis, respectively. In addition, de‐poly[(–)‐PSSt] and de‐poly[(–)‐MtSt] showed enantioselectivity ((S,S)‐isomer preferentially absorbed) in adsorption using trans‐stilbene oxide in spite of the absence of chiral substituents in the monoliths. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2348–2357, 2005     

Synthesis and solution properties of poly(vinyl ether)s with long alkyl chain,biphenyl, and cholesteryl pendants

The judicious choice of reaction conditions permitted living cationic polymerization of vinyl ethers with bulky and strongly interacting pendant groups, such as crystalline long alkyl chains and liquid crystalline mesogenic structures, using appropriate combinations of Lewis acids with added bases. Thus, well‐defined random and block copolymers with various pendants were also synthesized. Highly sensitive UCST‐type phase separation in various organic solvents was achieved employing crystallization of octadecyl pendants of homopolymers and random copolymers. This phase separation behavior is unusual for a polymer‐organic solvent system. Furthermore, thermally induced reversible physical gelation was conducted using this thermosensitive behavior. These specific pendants were very effective not only in organic media but also in water, in obtaining hydrogels with relatively low polymer concentrations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4392–4406, 2008