Confocal full‐field X‐ray microscope for novel three‐dimensional X‐ray imaging

A confocal full‐field X‐ray microscope has been developed for use as a novel three‐dimensional X‐ray imaging method. The system consists of an X‐ray illuminating `sheet‐beam' whose beam shape is micrified only in one dimension, and an X‐ray full‐field microscope whose optical axis is normal to the illuminating sheet beam. An arbitral cross‐sectional region of the object is irradiated by the sheet‐beam, and secondary X‐ray emission such as fluorescent X‐rays from this region is imaged simultaneously using the full‐field microscope. This system enables a virtual sliced image of a specimen to be obtained as a two‐dimensional magnified image, and three‐dimensional observation is available only by a linear translation of the object along the optical axis of the full‐field microscope. A feasibility test has been carried out at beamline 37XU of SPring‐8. Observation of the three‐dimensional distribution of metallic inclusions in an artificial diamond was performed.     

Buffer-gas pressure broadening for the 2ν3 band of methane measured with continuous-wave cavity ring-down spectroscopy

Buffer-gas pressure broadening for the P(1), Q(1), R(0) and R(1) transitions in the 2ν ₃ band of CH₄ was investigated in the 1660 nm region. The pressure broadening coefficients, γ(gas), were determined for a variety of buffer gases: N₂, O₂, He, Ne, Ar, Kr and Xe. The γ values generally increased with increasing polarizability of the buffer gases. γ(air) are 0.056(2) for P(1), 0.056(1) for R(0), 0.061(1) for R(1) and 0.059(1) for Q(1) in units of cm⁻¹ atm⁻¹ where numbers in parentheses are one standard deviation in units of the last digits quoted. The temperature dependent parameter (broadening exponent) for air is 0.84(7) for P(1) within the temperature range 233–298 K.     

Rapid identification and quantification of methamphetamine and amphetamine in hair by gas chromatography/mass spectrometry coupled with micropulverized extraction,aqueous acetylation and microextraction by packed sorbent

We developed a rapid identification and quantification method for the toxicological analysis of methamphetamine and amphetamine in human hair by gas chromatography/mass spectrometry coupled with a novel combination of micropulverized extraction, aqueous acetylation and microextraction by packed sorbent (MEPS) named MiAMi–GC/MS. A washed hair sample (1–5 mg) was micropulverized for 5 min in a 2 mL plastic tube with 250 μL of water. An anion-exchange sorbent was added to adsorb anionic interferences. After removing the residue with a membrane-filter unit, sodium carbonate and acetic anhydride was admixed in turn. Acetylation was completed in approximately 20 min at room temperature. The acetylated analytes in the reaction liquid were concentrated to an octadecylsilica sorbent packed in the needle of a syringe by a CombiPAL autosampler. Elution was carried out with 50 μL of methanol, and the entire eluate injected into a gas chromatograph using a programmable temperature vaporizing (PTV) technique. The time required for sample preparation and GC/MS analysis was approximately 1 h from a washed hair sample, and an evaporation process was not required. Ranges for quantification were 0.20–50 (ng/mg) each for methamphetamine and amphetamine using 1 mg of hair. Accuracy and relative standard deviation (RSD) were evaluated intraday and interday at three concentrations, and the results were within the limit of a guidance issued by U.S. Food and Drug Administration. For identification, full-scan mass spectra of methamphetamine and amphetamine were obtained using 5 mg of fortified hair samples at 0.2 ng/mg. The extraction device of MEPS was durable for at least 300 extractions, whereas the liner of the gas chromatograph should be replaced after 20–30 times use. The carry over was estimated to be about 1–2%. This sample-preparation method coupled with GC/MS is fast and labor-saving in comparison with conventional methods.     

Charge‐Transfer Mechanism in Pt/KTa(Zr)O3 Photocatalysts Modified with Porphyrinoids for Water Splitting

The mechanism of photocatalytic splitting of H₂O into H₂ and O₂ on Pt/KTa(Zr)O₃ modified with various porphyrinoids was investigated. The photocatalytic activity of KTaO₃ catalysts is improved by dye modification. Cyanocobalamin (vitamin B₁₂) is the most effective for improving water‐splitting activity, and the formation rates of H₂ and O₂ achieved values of 575 and 280 μmol g_cat.^?1 h^?1, respectively. X‐ray photoelectron spectroscopy spectra of KTa(Zr)O₃ photocatalysts showed that Pt loaded onto dye‐modified KTaO₃ was slightly oxidized and had low catalytic activity for the H₂ oxidation reaction. Photoluminescence (PL) spectra of KTaO₃ catalysts suggested that excitation energy was transferred between KTaO₃, tetraphenylporphyrinatochromium(III) (Cr–TPP), and the Pt cocatalyst. The wavelength dependence of the activity of dye‐modified KTa(Zr)O₃ photocatalysts indicated that excitation of both KTa(Zr)O₃ and the dye was essential for achieving increased photocatalytic activity. This result suggests that two‐step excitation occurred in the dye‐modified KTa(Zr)O₃ photocatalysts. Because the lifetime of the charge‐separated state increased, this study reveals that modification with porphyrinoids is effective for increasing water‐splitting activity.     

Determination of Histamine in Rat Plasma and Tissue Extracts by Intramolecular Excimer-Forming Derivatization and LC with Fluorescence Detection

A highly sensitive and selective method for determination of histamine in rat plasma and tissue extracts by liquid chromatography with fluorescence detection is described. The method is based on precolumn derivatization of amino groups of histamine with two molecules of 4-(1-pyrene)butyric acid N-hydroxysuccinimide ester that allows generation of intramolecular excimer fluorescence. The detection limit for histamine was 0.183 nM. This sensitivity allowed determination of histamine in 10 μL of rat plasma or in the extracts from less than 1 mg of tissue.     

Oxygen reduction reaction activity of monodispersed Pt nanoparticles-loaded carbon black catalyst prepared with a Pt carbonyl cluster anion

Pt nanoparticles-loaded carbon black (CB) was prepared from Pt carbonyl cluster complexes, and had much narrower size distribution than commercial Pt nanoparticles/CB. In the former the monodispersed Pt nanoparticles were highly dispersed on CB without aggregation even at high Pt loading of 80 wt.%. Hydrodynamic voltammograms in O₂-saturated 0.05 M H₂SO₄ solution at 30 °C showed that the onset potential of oxygen reduction reaction (ORR) current for the monodispersed Pt nanoparticles/CB electrode was more positive than that for a polycrystalline Pt electrode and similar to that for the commercial Pt nanoparticles/CB electrode. Moreover, the mass activity for ORR for the monodispersed Pt nanoparticles/CB electrode was ca. 4.9 times higher than that for the commercial Pt nanoparticles/CB electrode, clearly indicating that the control of size distribution of Pt nanoparticles is meaningful for reducing the Pt consumption.     

Nanoscale evaluation of lubricity on well-defined polymer brush surfaces using QCM-D and AFM

For preparing a “highly lubricated biointerface”, which has both excellent lubricity and biocompatibility, we investigated the factors responsible for resistance to friction during polymer grafting. We prepared poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), poly(2-hydroxyethyl methacrylate) (PHEMA), and poly(methyl methacrylate) (PMMA) brush layers with high graft density and well-controlled thickness using atom transfer radical polymerization (ATRP). We measured the water absorptivity in the polymer brush layers and the viscoelasticity of the polymer-hydrated layers using a quartz crystal microbalance with dissipation monitoring (QCM-D) measurements. The PMPC brush layer had the highest water absorptivity, while the PMPC-hydrated layer had the highest fluidity. The friction properties of the polymer brush layers were determined in air, water, and toluene by atomic force microscopy (AFM). The friction on each polymer brush decreased only when a good solvent was chosen for each polymer. In conclusion, the brush layer possessing high water absorptivity and fluidity in water contributes to reduce friction. PMPC grafting is an effective and promising method for obtaining highly lubricated biointerfaces.     

Fresnel zone plate with apodized aperture for hard X‐ray Gaussian beam optics

Fresnel zone plates with apodized apertures [apodization FZPs (A‐FZPs)] have been developed to realise Gaussian beam optics in the hard X‐ray region. The designed zone depth of A‐FZPs gradually decreases from the center to peripheral regions. Such a zone structure forms a Gaussian‐like smooth‐shouldered aperture function which optically behaves as an apodization filter and produces a Gaussian‐like focusing spot profile. Optical properties of two types of A‐FZP, i.e. a circular type and a one‐dimensional type, have been evaluated by using a microbeam knife‐edge scan test, and have been carefully compared with those of normal FZP optics. Advantages of using A‐FZPs are introduced.     

Formation and disruption of current paths of anodic porous alumina films by conducting atomic force microscopy

Anodic porous alumina (APA) films have a honeycomb cell structure of pores and a voltage-induced bi-stable switching effect. We have applied conducting atomic force microscopy (CAFM) as a method to form and to disrupt current paths in the APA films. A bi-polar switching operation was confirmed. We have firstly observed terminals of current paths as spots or areas typically on the center of the triangle formed by three pores. In addition, though a part of the current path showed repetitive switching, most of them were not observed again at the same position after one cycle of switching operations in the present experiments. This suggests that a part of alumina structure and/or composition along the current paths is modified during the switching operations.     

Bragg scattering induces Fano resonance in photonic crystals

We present a study of a Fano resonance between a narrow Bragg band and disorder-induced continuum in photonic crystals where the continuum is either of the broad band Fabry-Pérot scattering in an imperfect one-dimensional photonic crystal or Mie scattering in an imperfect three-dimensional photonic crystal. Our experimental studies of synthetic opals have demonstrated how the Fano resonance may lead to a transmission spectrum exhibiting a Bragg dip with an asymmetric profile or a Bragg rise.