Apparent diffusion coefficient of line scan diffusion image in normal prostate and prostate cancer—comparison with single-shot echo planner image

Purpose

This retrospective study was designed to evaluate the apparent diffusion coefficient (ADC) of line scan diffusion images (LSDI) in normal prostate and prostate cancer. Single-shot echo planner images (SS-EPI) were used for comparison.

Materials and Methods

Twenty prostate tumors were examined by conventional MRI in 14 patients prior to radical prostatectomy. All patients were examined with a 1.5-T MR imager (Signa CV/i ver. 9.1 GE Medical System Milwaukee, WI, USA). Diffusion-weighted MR imaging (DWI) using LSDI was performed with a pelvic phased-array coil, with b values of 5 and 800 s/mm². DWI using SS-EPI was performed with a body coil, with b values of 0 and 800 s/mm². The ADCs of each sequence for 14 normal prostate and 20 prostate cancers were histopathologically assessed. Signal-to-noise ratio (SNR) on DWI was estimated and compared for each sequence.

Results

The mean ADCs (±S.D.) of normal peripheral zones (PZ), transition zones (TZ) and cancer (in 10⁻³ mm²/s) that used LSDI were 1.42±0.12, 1.23±0.10 and 0.79±0.19, respectively. Those that used SS-EPI were 1.76±0.26, 1.38±0.20 and 1.05±0.27, respectively. Using unpaired t test (P<.05), we found a significant difference in each sequence between normal tissue (both PZ and TZ) and the cancer. Paired t test (P<.05) also registered a significant difference between LSDI and SS-EPI. Mean SNR for DWI using LSDI was 16.49±5.03, while the DWI using SS-EPI was 18.85±9.26. The difference between the SNR of each sequence was not statistically significant by paired t test.

Conclusion

We found that ADCs using LSDI and SS-EPI showed similar tendencies in the same patients. However, in all regions, LSDI ADCs had smaller standard deviations than SS-EPI ADCs.     

Atmospheric pressure chemical vapour deposition of selenium and tellurium films by UV laser photolysis of diethyl selenium and diethyl tellurium

Excimer laser‐induced photolysis of gaseous diethyl selenium and diethyl tellurium (C₂H₅)₂M (M = Se, Te) is controlled by cleavage of both M? C bonds, it yields C₁–C₄ hydrocarbons (ethene as major product) and results in chemical vapour deposition of selenium films and nanosized tellurium powder. The selenium and tellurium properties were characterized by X‐ray photoelectron spectroscopy and Scanning electron Microscopy techniques. Copyright © 2001 John Wiley & Sons, Ltd.     

Room-temperature growth of high-quality ZnO nanocrystals using a dressed-photon-assisted near-field process

Single-crystalline ZnO nanocrystals were fabricated by room-temperature photo-chemical vapor deposition (PCVD). We further enhanced the growth of high-quality single-crystalline ZnO nanocrystals using dressed photons and phonons (DPPs). This resulted in greater position control and the growth of high-quality ZnO nanocrystals. The ZnO nanocrystals produced with DPPs had excellent cathodoluminescence characteristics, indicating that the near-field PCVD process could be a promising technique for nanophotonic integrated circuit production.     

Synthetic Studies on Sialoglycoconjugates 22: Total Synthesis of Tumor-Associated Ganglioside,Sialyl Lewis X1

ABSTRACT

The first total synthesis of tumor-associated glycolipid antigen, sialyl Lewis X is described. Glycosylation of 2-(trimethylsilyl)ethyl O-(2-acetamido-4,6-O-benzylidene-2-deoxy-β-D-glucopyranosyl)-(1→3)-O-(2,4,6-tri-O-benzyl-β-D-galactopyranosyl)-(1→4)-2,3,6-tri-O-benzyl-β-D-glucopyranoside (1) with methyl 2,3,4-tri-O-benzyl-1-thio-β-L-fuco-pyranoside (4) gave the α-glycoside (5), which was converted by reductive ring-opening of the benzylidene acetal into the glycosyl acceptor (6). Dimethyl(methylthio)sulfonium triflate-promoted coupling of 6 with methyl O-(methyl 5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→3)-2,4,6-tri-O-benzoyl-1-thio-β-D-galactopyranoside (7) afforded the desired hexasaccharide 8 in good yield. Compound 8 was converted into the α-trichloroacetimidate 11, via reductive removal of the benzyl groups, O-acetylation, removal of the 2-(trimethylsilyl)ethyl group, and treatment with trichloroacetonitrile, which, on coupling with (2S, 3R, 4E)-2-azido-3-O-benzoyl-4-octa-decene-1,3-diol (12), gave the β-glycoside 13. Finally, 13 was transformed, via selective reduction of the azide group, condensation with octadecanoic acid, O-deacylation, and hydrolysis of the methyl ester group, into the title compound 16.     

Anionic polymerization of N,N‐dialkyl‐2‐methylenebut‐3‐enamide: Effect of alkyl substituents on polymerization behavior

Anionic polymerizations of three 1,3‐butadiene derivatives containing different N,N‐dialkyl amide functions, N,N‐diisopropylamide (DiPA), piperidineamide (PiA), and cis‐2,6‐dimethylpiperidineamide (DMPA) were performed under various conditions, and their polymerization behavior was compared with that of N,N‐diethylamide analogue (DEA), which was previously reported. When polymerization of DiPA was performed at ?78 °C with potassium counter ion, only trace amounts of oligomers were formed, whereas polymers with a narrow molecular weight distribution were obtained in moderate yield when DiPA was polymerized at 0 °C in the presence of LiCl. Decrease in molecular weight and broadening of molecular weight distribution were observed when polymerization was performed at a higher temperature of 20 °C, presumably because of the effect of ceiling temperature. In the case of DMPA, no polymer was formed at 0 °C and polymers with relatively broad molecular weight distributions (M_w/M_n = 1.2) were obtained at 20 °C. The polymerization rate of PiA was much faster than that of the other monomers, and poly(PiA) was obtained in high yield even at ?78 °C in 24 h. The microstructure of the resulting polymers were exclusively 1,4‐ for poly(DMPA), whereas 20–30% of the 1,2‐structure was contained in poly(DiPA) and poly(PiA). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3714–3721, 2010     

On the worst conditional expectation

We study continuous coherent risk measures on L^p, in particular, the worst conditional expectations. We show some representation theorems for them, extending the results of Artzner, Delbaen, Eber, Heath, and Kusuoka.     

Structure and dynamics of ovalbumin gels

Solvent effects on dynamical and thermal behaviors of ovalbumin (OVA) gels induced by thermal denaturation at high temperature of 160°C were studied from dynamic shear modulus measurement, shear creep and creep recovery measurement, and DSC measurement. Two organic solvents, glycerin (G) and ethylene glycol (EG), and their mixtures with water (W)(G/W and EG/W) were used as solvent for preparation of gels. Stable gels formed in pure glycerin took a fractal structure at OVA concentration C range of 15–45wt% at a temperature specific to respective C, whereas a fractal structure was not observed for gels prepared in EG, G/W, and EG/W. The results were consistent with thermal denaturation behaviors of OVA in these solvents. Morphologies of two gels prepared in water and glycerin were explored using high resolution SEM, which showed that a basic unit responsible for formation of OVA gels was spheres with a diameter ranging from 20 to 40 nm, being much larger than 5.6 nm of the diameter of native OVA, and a fractal structure was related to network formation accompanied by melting of those spheres.Dedicated to Prof. John D. Ferry on the occasion of his 85th birthday.     

Discrete dihedral-angle modulation in porphyrin wheels adsorbed on Cu(1 0 0) observed by scanning tunneling microscopy

Conformations of two dodecameric porphyrin wheels adsorbed on a Cu(1 0 0) were probed by using scanning tunneling microscopy (STM). Whereas a wheel consisting of six meso-meso linked diporphyrins was detected as uniform ring structure, several different images with three discrete molecular heights were detected for a wheel consisting of six meso-meso, β-β,β-β triply-linked planar diporphyrins. These results indicate that the former has a conformation similar to that in a free space, while the latter has various conformations with respect to orientation of planar diporphyrin units toward the metal surface. Several discrete STM images of the latter have been interpreted in terms of possible eight conformations, which vary as to relative orientation of neighboring diporphyrin units.     

UV laser deposition of nanostructured Si/C/O/N/H from disilazane precursors and evolution to silicon oxycarbonitride

Megawatt ArF laser photolysis of gaseous methyldisilazanes [(CH₃)_nH_3?nSi]₂NH (n = 2, 3) in excess of Ar yields hydrocarbons (major volatile products), methylsilanes (minor volatile products) and allows chemical vapour deposition of solid amorphous Si/C/O/N/H powder containing Si? X (X? C, H, O, N) bonds. The incorporation of O is due to a high reactivity of the primarily formed products towards air moisture. The resulting solid materials possess nanometer‐sized texture and high specific area, contain Si‐centered radicals and anneal under argon to silicon oxycarbonitride, whose structure is described as a network of O‐ and N‐interconnected Si and C atoms. Copyright © 2006 John Wiley & Sons, Ltd.