Liquid-liquid extraction of copper(I) by cyclic tetrathio ethers

The liquid-liquid extraction of copper(I) with 12-, 13-, 15- and 16-membered cyclic tetrathio ethers ([n]aneS₄, where n represents the total number of carbon and sulphur atoms in the cyclic ligand ring) was examined stoichiometrically using picrate ion (Pic^?) for the formation of the ion pair. Copper(I) was extracted with four ligands (L) into 1,2-dichloroethane as the ion-pair compound, [Cu(I)L]⁺Pic^?. The extraction constant, K_ex, with each ligand was determined. As the ring size of cyclic tetrathio ethers increases, the log K_ex values, including that previously reported for [14]aneS₄, increase from 7.7 to 9.4. The value of Δ log K_ex, which represents the increase in log K_ex due to the addition of one carbon atom to the macrocyclic ring, was large between [13]aneS₄ and [14]aneS₄ (Δ log K_ex=1.0) and small between [14]aneS₄ and [15]aneS₄ (Δ log K_ex=0.1).     

Radiation-induced solid-state polymerization of trioxane under high pressure

The in-source polymerization of trioxane in the solid state was investigated over a wide range of temperature and pressure, i.e., from 30 to 140°C and up to 7000 kg/cm², respectively. In the polymerization that was carried out slightly below the melting point under pressure, the higher the pressure, the higher the rate of polymerization. It was confirmed that the maximum rate of solid-state polymerization of trioxane occurs near the melting points, even under elevated pressure. The rate of polymerization decreased with increasing pressure at constant temperature. The shape of the time–conversion curves may be classified into two types, i.e., one which is typical of high pressure and low temperature, and the other which is typical of low pressure and high temperature. Changes in the shape of the conversion—intrinsic viscosity curves occurred coincidentally. Thus, three regions for the different “polymerization characteristic” were determined as functions of polymerization temperature and pressure. Explanations are given for the above-mentioned polymerization characteristic.     

Thermodynamics of Solvation of 18-Crown-6 and Its Alkali-Metal Complexes in Various Solvents

Heats of solution of 1,4,7,10,13,16-hexaoxacyclooctadecane (18-crown-6) in acetonitrile, 1,2-dichloroethane, N,N-dimethylformamide, dimethyl sulfoxide, nitromethane, propylene carbonate, pyridine and water were measured at 25 °C and the enthalpies of the transfer of 18-crown-6 from waterto the aprotic solvents were derived. The thermodynamic quantities, G₁°, H₁° and T S₁°, for the formation of the[M(18-crown-6)]⁺ (M⁺ = Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) complexeswere determined by titration calorimetry in dimethyl sulfoxide containing0.1 mol dm^-3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25 °C. These thermodynamic quantities suggest that the complexationof 18-crown-6 with the alkali-metal ions mainly reflects the different solvationof 18-crown-6 and also the different degree of solvent structure.     

Kinetics of polymer translocation through a pore

We theoretically study kinetics of a polymer threading through a pore embedded in a flat membrane. We numerically solve three coupled kinetic equations for the number n(1) of polymer segments in one side of the membrane and expansion factors of the polymer chain in each side of the membrane. We find the time evolution n(1) proportional to t(1/(1+nu)) at late stages and the translocation time tau(t) is scaled as tau(t) proportional to 1+nu) for large number n of the polymer segments, where nu is the effective size exponent of the radius of gyration of the polymer. When the polymer is translocated into a region with a good solvent condition (nu=3/5), we obtain n(1) proportional to t(5/8) and tau(t) proportional to n(8/5).     

Trans-cis Photoisomerization of 1-Methyl-4-(4′-hydroxystyryl)pyridinium in inclusion complexes ofβ-cyclodextrin and its derivatives

The effects of -cyclodextrin (-CyD), heptakis(2,6-di-O-methyl)--cyclodextrin (DMCyD) and heptakis(2,3,6-tri-O-methyl)--cyclodextrin (TMCyD) ontrans-cis photoisomerization of 1-ethyl-4-(4-hydroxystyryl)pyridinium (POH) have been studied in aqueous solutions. The ratio of [cis]/[trans] for POH in the photostationary state at pH 8.54 was remarkably reduced by the presence of CyD or DMCyD. The reduction of the [cis]/[trans] ratio in the photostationary state was explained in terms of the shift of the equilibrium of POH ₊ ^trans PO _trans + H^– toward PO _trans formation. The binding constants of CyD and DMCyD for PO _trans were 2.00- and 1.36-fold larger than those for POH ₊ ^trans , respectively. The binding constants of TMCyD for both species are much smaller than those of CyD and DMCyD. This result indicates that PO _trans , which has a betain structure, forms stable complexes with CyD and DMCyD with its hydrophobic parts inside and the charged parts outside the CyD cavities.     

Synthesis of soluble aromatic polyesteramides by stepwise copolycondensation of bisphenols and aromatic diamines with diphenyl chlorophosphate in pyridine

The reaction promoted by diphenyl chlorophosphate (DPCP) in pyridine was successfully applied to the preparation of soluble aromatic copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, bisphenols, and a wide range of mol % aromatic diamines. Dropwise addition of a mixture of bisphenols and diamines (more favorably of bisphenols and then diamines) to the mixture of dicarboxylic acids activated by DPCP led the reactions homogeneously even with high mol % of diamines to produce copolymers of good solubility. This improved copolymer solubility was roughly estimated by sequence distribution of polyamide and polyester units in the copolymers, which was studied in a model reaction and in the copolycondensations by simultaneous and stepwise addition of bisphenols and diamines.     

Porphyrin boxes constructed by homochiral self-sorting assembly: optical separation, exciton coupling, and efficient excitation energy migration

meso-Pyridine-appended zinc(II) porphyrins Mn and their meso-meso-linked dimers Dn assemble spontaneously, in noncoordinating solvents such as CHCl3, into tetrameric porphyrin squares Sn and porphyrin boxes Bn, respectively. Interestingly, formation of Bn from Dn proceeds via homochiral self-sorting assembly, which has been verified by optical separations of B1 and B2. Optically pure enantiomers of B1 and B2 display strong Cotton effects in the CD spectra, which reflect the length of the pyridyl arm, thus providing evidence for the exciton coupling between the noncovalent neighboring porphyrin rings. Excitation energy migration processes within Bn have been investigated by steady-state and time-resolved spectroscopic methods in conjunction with polarization anisotropy measurements. Both the pump-power dependence on the femtosecond transient absorption and the transient absorption anisotropy decay profiles are directly associated with the excitation energy migration process within the Bn boxes, where the exciton-exciton annihilation time and the polarization anisotropy rise time are well described in terms of the F?rster-type incoherent energy hopping model by assuming a number of hopping sites of N = 4 and an exciton coherence length of L = 2. Consequently, the excitation energy hopping rates between the zinc(II) diporphyrin units have been estimated for B1 (48 ps)(-1), B2 (98 +/- 3 ps)(-1), and B3 (361 +/- 6 ps)(-1). Overall, the self-assembled porphyrin boxes Bn serve as a well-defined three-dimensional model for the light-harvesting complex.     

Determination of ammonium ion in a flow-injection system with a gas-diffusion membrane : Selection of Optimal Conditions for the pH Indicator

The spectrophotometric determination of ammonium ion in water by flow-injection analysis with a membrane-separator and a pH indicator for detection is studied in detail. The relations derived facilitate the selection of appropriate solution compositions or the prediction of sensitivity. It is shown that 1.5×10^?5 M bromocresol purple (pH 6.8) as acceptor solution gives the maximal sensitivity in the flow system with a laboratory-made separation unit. Application of ultrasonic radiation in the separation step and the use of different flow rates for the donor and acceptor streams may result in increased permeation of ammonia and a correspondingly high sensitivity. By modifying the acceptor solution so that the sensitivity is decreased, more concentrated samples such as urine can be analyzed by direct injection without prior dilution. In this procedure, the sample rate was 60 h^?1 for ammonium concentration of more than 10^?5 M and 30–40 h^?1 for concentrations in the range 3×10^?7?10^?5 M. The detection limit was about 3×10^?7 M.     

Physical and Chemical Properties of Four-Membered Bis(triphenylphosphane)platinum(II) Sulfenato Thiolato Complexes

The reaction of isolable dithiirane 1-oxides with (Ph 3 P) 2 Pt( m 2 -C 2 H 4 ) provided the title complexes in high yields. 31 P NMR spectroscopy of the phosphine ligands of the complexes and x-ray crystallographic analysis of a complex were reported.