Pd‐initiated polymerization of diazo compounds bearing dialkoxyphosphinyl group and hydrolysis of the resulting polymers and oligomers to afford phosphonic acid‐containing products

Pd‐initiated polymerization and oligomerization of diazo compounds containing a dialkoxyphosphinyl group are described. Polymerization of 2‐dialkoxyphosphinylethyl diazoacetates with π‐allylPdCl‐based initiating systems afforded C? C main chain polymers bearing phosphonate on each main chain carbon atom. The quantitative transformation of the side chain phosphonate to phosphonic acid resulted in the formation of water soluble polymers having the acid groups accumulated around their main chains, although the carbonyl ester linkage in the side chain was cleaved via intramolecular acid‐assisted hydrolysis in water at 80 °C. Pd‐initiated oligomerization of diethyl diazomethylphosphonate yielded an oligomeric product bearing diethoxyphosphiny groups directly attached to its main chain carbons, with unexpected incorporation of azo group in the main chain framework. Hydrolysis of the phosphonate of the oligomer afforded a water‐soluble product, which was revealed to show higher proton conductivity than poly(vinylphosphonic acid) under certain conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1742–1751     

Mechanistic action of ferric oxide in the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In the hydrosilylation of 1,6-divinyl(perfluorohexane) (FDV) with trichlorosilane (TCS) in the presence of catalytic chloroplatinic acid (Pt-Cat) under an air atmosphere (0.99 MPa), a runaway reaction accompanied by a severe pressure release occurred when Fe₂O₃ was present as an impurity in the system. In this study, we investigated the mechanism of action of Fe₂O₃ on this hydrosilylation by monitoring the thermal behavior of TCS/FDV/Pt-Cat/Fe₂O₃ mixtures with various compositions, using an accelerating rate calorimeter (ARC). In the case of TSC/FDV/Pt-Cat, a typical hydrosilylation composition in the industrial process, heat release, possibly due to hydrosilylation, began at 90 °C. On the other hand, for TCS/FDV/Pt-Cat/Fe₂O, the heat release due to hydrosilylation was hardly observed, but abrupt heat and pressure releases occurred at higher temperatures (>170 °C). Like TCS/FDV/Pt-Cat/Fe₂O₃, TCS/FDV, which contain neither Pt-Cat nor Fe₂O₃, released heat and pressure at high temperatures (>210 °C), while the heat and pressure release rates were comparatively low. From these results, the runaway reaction may occur when hydrosilylation is prevented, and Fe₂O₃ behaves as a negative catalyst for hydrosilylation. In the FT-IR spectrum of TCS/FDV/Pt-Cat/Fe₂O₃ after heating, an absorption peak at approximately 1,710 cm^?1, which may be attributed to a carbonyl group, was observed. Thus, it is considered that the runaway reaction observed during the hydrosilylation results from the action of Fe₂O₃ as a negative catalyst for hydrosilylation as well as as an oxidation catalyst for the by-product generated from the reaction between TCS and FDV.     

Thermal behavior and dismantlability of adhesives containing various inorganic salts

As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts.     

Hydrochlorothiazide Enhances UVA‐Induced DNA Damage

The UVA is currently thought to be carcinogenic because, similar to UVB, it induces the formation of cyclobutane pyrimidine dimers (CPDs). Various drugs have been reported to cause photosensitive drug eruptions as an adverse effect. Although the precise mechanism of photosensitive drug eruption remains to be elucidated, it is generally accepted that free radicals and other reactive molecules generated via UV‐irradiated drugs play important roles in the pathogenesis of photosensitive drug eruptions. The waveband of concern for photo‐reactive drugs is UVA‐visible light, but some extend into the UVB region. We tested whether photosensitive drugs could enhance CPD formation after UVA exposure by using isolated DNA in the presence of several reported photosensitive drugs using high‐performance liquid chromatography. We found that the diuretic agent hydrochlorothiazide (HCT) significantly enhanced the production of TT dimers over a wide range of UVA. Furthermore, we investigated whether UVA plus HCT could enhance CPD production in xeroderma pigmentosum model mice defective in nucleotide excision repair. Immunofluorescence studies showed that CPD formation in the skin significantly increased after 365 nm narrow‐band UVA irradiation in the presence of HCT, compared with that in wild‐type mice. HCT could be used with caution because of its enhancement of UVA‐induced DNA damage.     

Synthesis of Novel Spiro[indol-2,2′-pyrroles] Using Isocyanide-Based Multicomponent Reaction

An efficient and facile method for the synthesis of novel spiro[indole-2,2′-pyrroles] from N-methyl-3-isatin imines, t-butyl isocyanide, and dialkyl acetylenedicarboxylate has been achieved by [3 + 2] cyclo addition reaction. All the products were purified by column chromatography as yellow solids and confirmed with ¹H NMR, ¹³C NMR, fast atom bombardment, mass, and infrared. Compound 11 was further confirmed with x-ray analysis.     

Photoinduced alignment of polymer liquid crystals containing azobenzene moieties in the side group VII. On He-Ne laser beam irradiation

Photoinduced alignment in a polymer liquid crystal prepared from 6-{1-[4-(2-cyano-4-nitrophenylazo)phenyl]piperazino}hexyl acrylate and 4'-[6-(methacryloyloxy)hexyloxy]-4-cyanobiphenyl was investigated for the first time on irradiation with a polarized He-Ne laser beam at 633 nm. The azobenzene moieties as well as the inert cyanobiphenyl mesogenic units were aligned with the molecular long axis perpendicular to the polarization direction of the irradiation light. Alignment induced on short irradiation was reversible, while that induced under prolonged irradiation was irreversible due to the occurrence of crosslinking which might be caused by photoinduced decomposition of the azobenzene moieties during the photoirradiation process.     

Synthetic Studies on Sialoglycoconjugates 40: Stereocontrolled Synthesis of Sialyl Lewis X Epitope and Its Ceramide Derivative

Abstract

Stereocontrolled synthesis of sialyl Le^x epitope and its ceramide derivative with regard to the introduction of galactose or β-D-galactosyl ceramide into the terminal N-acetylglucosamine residue of sialyl Le^x determinant is described. Königs-Knorr condensation of 2-(trimethylsilyl)ethyl 2, 4, 6-tri-O-benzyl-β-D-galactopyranoside (4) with 3, 4, 6-tri-O-acetyl-2-deoxy-2-phthalimido-D-glucopyranosyl bromide (5) gave the desired β-glycoside 6, which was converted into 2-(trimethylsilyl)ethyl O-(2-acetamido-4, 6-O-benzylidene-2-deoxy-β-D-glucopyranosyl)-(l→3)-2, 4, 6-tri-O-benzyl-β-D-galactopyranoside (8) via removal of the phthaloyl and O-acetyl groups, followed by N-acetylation and 4, 6-O-benzylidenation. Glycosylation of 8 with methyl 2, 3, 4-tri-O-benzyl-1-thio-β-L-fucopyranoside (9) gave the α-glycoside (10), which was transformed by reductive ring-opening of the benzyliderie acetal into the acceptor (11). Dimethyl(methylthio)sulfonium triflate (DMTST)-promoted coupling of 11 with methyl O-(methyl 5-acetamido-4, 7, 8, 9-tetra-O-acetyl-3, 5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→3)-2, 4, 6-tri-O-benzoyl-l-thio-β-D-galactopyra-noside (12) afforded the desired pentasaccharide (13), which was converted into the α-trichloroacetimidate 16 via reductive removal of the benzyl groups, then O-acetylation, removal of the 2-(trimethyIsilyl)ethyl group and treatment with trichloroacetonitrile. Condensation of 16 with (2S, 3R, 4E)-2-azido-3-O-benzoyl-4-octadecene-l, 3-diol (18) gave the β-glycoside 19, which was transformed into the title compound 21, via reduction of the azido group, coupling with octadecanoic acid, O-deacylation and hydrolysis of the methyl ester group. On the other hand, O-deacylation of 13 and subsequent hydrolysis of the methyl ester group gave the pentasaccharide epitope 17.     

Synthetic Studies on Sialoglycoconjugates 12: Total Synthesis of Sialyl Neolactotetraosyl Ceramide

Abstract

Sialoglycoconjugates such as glycoproteins and glycolipids are present as components of cell memberanes and play important roles^1,2 in biological systems. Sialyl neolactotetrasyl ceramide (IV³NeuAcnLc₄Cer), a complex type of ganglioside, was isolated as the major ganglioside of human erythrocytes³ and was shown to be a receptor of that this glycolipid induces granulocytic differentiation of human premyelocytic leukemia cell.