Oxidation of Dimethyl Sulfide in Air Using Electron-Beam Irradiation,and Enhancement of its Oxidation Via an MnO<Subscript>2</Subscript> Catalyst

The decomposition of dimethyl sulfide (DMS) at initial concentrations of 4.5–18.0 ppmv in air was studied under electron-beam (EB) irradiation. Doses to decompose 90% of input DMS were 2.5 kGy for 4.5 ppmv, 3.4 kGy for 10.6 ppmv, and 3.9 kGy for 18.0 ppmv. HCOOH, (CH₃)₂SO, and trace CH₃OH and (CH₃)₂SO₂ were produced as irradiation products in addition to CO₂ and CO. Application of an O₃ decomposition catalyst to an irradiated sample gas led to an enhancement in the oxidation of DMS and its products into CO₂ and the decomposition of O₃. For 10.6 ppmv DMS/air, the mineralization ratio increased from 41% via only EB irradiation to 100% via the combination treatment at 6.3 kGy. The yield of CO₂ to CO_x increased from 5.3 to 87.6% by combination with catalytic oxidation. This combination treatment enables the irradiation energy used to deodorize gas streams containing DMS to be reduced.     

Anomalous thermochromic transition of poly(di‐n‐octylsilane)

The thermochromic behavior of poly(di‐n‐octylsilane) {[Si(C₈H₁₇)₂]_n; PDOS} was studied by ultraviolet (UV) absorption, differential scanning calorimetry, and X‐ray diffraction measurements. The structure of PDOS in the low‐temperature phase strongly depended on not only the temperature but also the rate of cooling, that is, the thermal history. Temperature‐dependent UV absorption spectra were highly dependent on thermal hysteresis. Cooled rapidly (10 K/min), PDOS showed two absorption peaks at 3.32 and 3.51 eV in low‐temperature‐ordered phases, whereas a single absorption peak at 3.32 eV became predominant with slow cooling (0.3 K/min). The appearance of the two peaks at low temperatures suggested that a mixture of different conformations was introduced by rapid cooling. A fiber diffraction pattern measured at 240 K after rapid cooling also showed evidence of the existence of novel conformation. A temperature‐dependent powder X‐ray diffraction pattern changed significantly between 270 and 280 K. Rapid cooling reduced the intensity of the X‐ray diffraction peak in this temperature region. This intensity change was explained by the conformational mixture in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1085–1092, 2001     

Structures of the Reactive Intermediates in Organocatalysis with Diarylprolinol Ethers

Structures of the reactive intermediates (enamines and iminium ions) of organocatalysis with diarylprolinol derivatives have been determined. To this end, diarylprolinol methyl and silyl ethers, 1 , and aldehydes, Ph? CH₂? CHO, ^tBu? CH₂? CHO, Ph? CH=CH? CHO, are condensed to the corresponding enamines, A and 3 (Scheme 2), and cinnamoylidene iminium salts, B and 4 (Scheme 3). These are isolated and fully characterized by melting/decomposition points, [α]_D, elemental analysis, IR and NMR spectroscopy, and high‐resolution mass spectrometry (HR‐MS). Salts with BF₄, PF₆, SbF₆, and the weakly coordinating Al[OC(CF₃)₃]₄ anion were prepared. X‐Ray crystal structures of an enamine and of six iminium salts have been obtained and are described herein (Figs. 2 and 4–8, and Tables 2 and 7) and in a previous preliminary communication (Helv. Chim. Acta 2008 , 91, 1999). According to the NMR spectra (in CDCl₃, (D₆)DMSO, (D₆)acetone, or CD₃OD; Table 1), the major isomers 4 of the iminium salts have (E)‐configuration of the exocyclic N?C(1′) bond, but there are up to 11% of the (Z)‐isomer present in these solutions (Fig. 1). In all crystal structures, the iminium ions have (E)‐configuration, and the conformation around the exocyclic N‐C? C‐O bond is synclinal‐exo (cf. C and L ), with one of the phenyl groups over the pyrrolidine ring, and the RO group over the π‐system. One of the meta‐substituents (Me in 4b , CF₃ in 4c and 4e ) on a 3,5‐disubstituted phenyl group is also located in the space above the π‐system. DFT Calculations at various levels of theory (Tables 3–6) confirm that the experimentally determined structures (cf. Fig. 10) are by far (up to 8.3 kcal/mol) the most stable ones. Implications of the results with respect to the mechanism of organocatalysis by diarylprolinol derivatives are discussed.     

Theoretical analysis on the limitations of the open-circuit voltage of a hydrogenated amorphous silicon p-i-n solar cell

We have made theoretical studies on the limitation of the open-circuit voltageV _oc of a hydrogenated amorphous silicon (a-Si:H) p-i-n type solar cell. The effects of the tail states in the a-Si:H i layer and of the interface recombination are discussed in detail. The opencircuit voltage increases when the distribution of the tail states is sharp and/or the capture cross sections of these states are small. This is because the recombination rate of photogenerated carriers and/or the density of space charge due to trapped carriers in these states become low in these conditions. These effects of the tail states on the value ofV _oc become pronounced when the built-in potential of the p-i-n junction is high. The decrease in the effective recombination velocity of carriers at the p/i and n/i interfaces results in an increase ofV _oc. This increase becomes remarkable when the effects of the tail states on the value ofV _oc are small. Both the sharp distribution of tail states and the small value of the interface recombination velocity are necessary to increase considerably the value ofV _oc. We show the conditions of the material parameters necessary to obtain an open-circuit voltage of 1.0 V.     

Finite-Difference Time-Domain Analysis of the Interaction of Gaussian Evanescent Light with a Single Dielectric Sphere or Ordered Dielectric Spheres

The interaction of gaussian evanescent light with a single dielectric sphere or ordered dielectric spheres in an attenuated total reflection (ATR) geometry was analyzed by the finite-difference time-domain method. Various aspects of this interaction were investigated in terms of spatial visualizations of light intensity, reflectance vs. wavelength characteristics, the transient behavior of reflectances, and so forth. In the case of a single sphere, it was evident that the whispering gallery mode can be excited in ATR geometries, but such excitation cannot be easily confirmed only through the observation of wavelength-scanned ATR spectra. In the case of a closely packed two-dimensional array of dielectric spheres, it was found that an easy axis and also a difficult axis for light propagation exist.This paper was originally presented at the 5th International Conference on NEAR FIELD OPTICS and RELATED TECHNOLOGIES (NFO-5), which was held on December 6–10, 1998 at Coganoi Bay Hotel, Shirahama, Japan, in cooperation with the Japan Society of Applied Phisics and Mombusho Grantin Aid for Scientific Research on Priority Areas “Near-field Nano-optics” Project, sponsored by Japan Society for the Promotion of Science.     

Information theory of optimization in chromatography: Analytical structure of optimization

Summary The analytical roles of chromatographic variables (column length, etc.) can be soundly comprehended and compared in terms of the precision (Φ) of measurements and efficiency (ϑ) of analysis which are described as Shannon information and information flow, respectively. The φϑ plots of the optimization process and the information Φ transmitted by a single peak are useful to understand the analytical structure of optimization. Variables treated here are mobile phase composition (X), column length (L), mobile phase velocity rate (u), detection wavelength (λ) and plate number (N).     

Uptake of transition metal ions using liposomes containing dicetylphosphate as a ligand.

The uptake of Cu2+ was investigated using various types of liposomes composed of phosphatidylcholine (PC), cholesterol (Chol) and dicethylphosphate (DCP). DCP played a role as a ligand for Cu2+. Multilamellar vesicles (MLVs) were more effective for the uptake of Cu2+ compared to unilamellar vesicles prepared by the extrusion technique. The uptake efficiency of MLVs for Cu2+ was dependent on the molar ratio of DCP in MLVs. The uptake percent of Cu2+ was 92% using MLVs having a PC:DCP:Chol molar ratio of 4:3:3; 95% of the total vesicle Cu2+ was bound to DCP of the outer membrane surface of the MLVs, and the remaining 5% of the total Cu2+ was distributed into the interior side of the MLVs. MLVs having a PC:DCP:Chol molar ratio of 4:3:3 were also effective as separation media for Mn2+, Co2+, Ni2+ and Zn2+. The uptake efficiency of the MLVs for the transition-metal ions increased in the order Co2+ < Zn2+ < Ni2+ < Mn2+ < Cu2+.