Stereoselective Syntheses of all the Possible Stereoisomers of Coronafacic Acid

An efficient and stereoselective syntheses of all the possible stereoisomers of coronafacic acid (CFA) has been developed. The stereochemistries of C3a and C7a were controlled in a diastereoselective Diels-Alder type cycloaddition using a chiral auxiliary. CFA and 6-epi-CFA were synthesized by hydrogenation of a common intermediate. During the synthesis of 6-epi-CFA, we established that its cis-fused configuration is important for the introduction of C4-C5 double bond by dehydration. This report is the first practical synthesis of both 6-epi-CFA, and its enantiomer.     

Anisotropic Poisson Effect and Deformation‐Induced Fluorescence Change of Elastic 9,10‐Dibromoanthracene Single Crystals

Elastic organic crystals have attracted considerable attention as next‐generation flexible smart materials. However, the detailed information on both molecular packing change and macroscopic mechanical crystal deformations upon applied stress is still insufficient. Herein, we report that fluorescent single crystals of 9,10‐dibromoanthracene are elastically bendable and stretchable, which allows a detailed investigation of the deformation behavior. We clearly observed a Poisson effect for the crystal, where the short axes (b and c‐axes) of the crystal are contracted upon elongation along the long axis (a‐axis). Moreover, we found that the Poisson's ratios along the b‐axis and c‐axis are largely different. Theoretical molecular simulation suggests that the tilting motion of the anthracene may be responsible for the large deformation along the c‐axis. Spatially resolved photoluminescence (PL) measurement of the bent elastic crystals reveals that the PL spectra at the outer (elongated), central (neutral), and inner (contracted) sides are different from each other.     

Induced Fitting and Polarization of a Bromine Molecule in an Electrophilic Inorganic Molecular Cavity and Its Bromination Reactivity

Dodecavanadate, [V₁₂O₃₂]^4? (V12), possesses a 4.4 Å cavity entrance, and the cavity shows unique electrophilicity. Owing to the high polarizability, Br₂ was inserted into V12, inducing the inversion of one of the VO₅ square pyramids to form [V₁₂O₃₂(Br₂)]^4? (V12(Br2)). The inserted Br₂ molecule was polarized and showed a peak at 185 cm^?1 in the IR spectrum. The reaction of V12(Br2) and toluene yielded bromination of toluene at the ring, showing the electrophilicity of the inserted Br₂ molecule. Compound V12(Br2) also reacted with propane, n‐butane, and n‐pentane to give brominated alkanes. Bromination with V12(Br2) showed high selectivity for 3‐bromopentane (64 %) among the monobromopentane products and preferred threo isomer among 2‐,3‐dibromobutane and 2,3‐dibromopenane. The unique inorganic cavity traps Br₂ leading the polarization of the diatomic molecule. Owing to its new reaction field, the trapped Br₂ shows selective functionalization of alkanes.     

Macrocyclic Metal Complexes Bearing Rigid Polyaromatic Ligands: Synthesis and Catalytic Activity

We synthesised palladium and platinum complexes possessing cyclic and acyclic pincer‐type polyaromatic ligands and investigated their structural effect on the catalysis. The pincer‐type bis(6‐arylpyridin‐2‐yl)benzene skeleton was constructed via Kröhnke pyridine synthesis under transition metal‐free conditions on gram‐scale quantity. Ligand structure significantly influenced catalytic activity toward the platinum‐catalysed hydrosilylation of diphenyl acetylenes, despite the ligand‐independence of the conformations and electronic properties of these complexes.     

Analysis of Vicinal Water in Soft Contact Lenses Using a Combination of Infrared Absorption Spectroscopy and Multivariate Curve Resolution

In this paper, we propose a new spectroscopic method to explore the behavior of molecules near polymeric molecular networks of water-containing soft materials such as hydrogels. We demonstrate the analysis of hydrogen bonding states of water in the vicinity of hydrogels (soft contact lenses). In this method, we apply force to hydrated contact lenses to deform them and to modulate the ratio between the signals from bulk and vicinal regions. We then collect spectra at different forces. Finally, we extracted the spectra of the vicinal region using the multivariate curve resolution-alternating least square (MCR-ALS) method. We report the hydration states depending on the chemical structures of hydrogels constituting the contact lenses.     

Rearrangement of 6,7-dithiabicyclo[3.1.1]heptane 6-oxides to a 7,8-dithia-6-oxabicyclo[3.2.1]octane catalyzed by montmorillonite K 10

Treatment of 2,2,4,4-tetramethyl-1,5-diphenyl-6,7-dithiabicyclo[3.1.1]heptane 6-endo-oxide ( 2 ) with Montmorillonitc K 10 in dichloromethane gave 2,2,-4,4-tetramethyl-1,5-diphenyl-7,8-dithia-6-oxabicyclo-[3.2.1]octane ( 6 ) (11%) with recovery of 2 (87%). Under similar reaction conditions, the 6-exo-oxide 7 and the sulfenate 6 gave a mixture of 6 (21%), 2 (67%), and 7 (9%) and a mixture of 2 (89%) and 6 (9%), respectively. These results indicate the relative thermodynamic stabilities of the three compounds to be 2 > 6 > 7 . PM3 calculations on these compounds showed the heats of formation (kcal/mol) to be in the following order: 6 (44.12783), 2 (57.46721), and 7 (59.37918). The driving force of this unusual 1,2-rearrangement of 2 and 7 to 6 would be the release of the ring strain of the bicyclo[3.1.1]heptane system of 2 and 7 by ring expansion.     

Spectroscopic and theoretical studies of optically active porphyrin dimers: a system uninterpretable by exciton coupling theory.

The electronic excited states of a meso-meso beta-beta doubly linked bis-porphyrin are comprehensively investigated by measuring its circular dichroism (CD) and magnetic circular dichroism (MCD) spectra. The observed spectroscopic properties are rationalized by DFT calculations. The frontier molecular orbitals (MOs) are constructed by the linear combinations of the constituent monomers' four MOs. Comparison of a theoretical CD spectrum based on time-dependent DFT (TDDFT) with the experimental spectra resulted in the assignment of the helical conformation of the dimer. This assignment is contrary to the previous assignment based on the point-dipole approximation (exciton coupling theory).     

Poly(2,5-dimethoxyaniline) film coating for corrosion protection of iron

A poly(2,5-dimethoxyaniline) (PDMA) film was coated on the iron surface by the electropolymerization of 2,5-dimethoxyaniline in neutral buffer solution (pH?6.86). The PDMA film strongly adhered to the surface because of the polar methoxy groups of the PDMA molecules. The fact that no electrochemical response of the PDMA film-coated iron electrode to dissolved Fe²⁺ exhibited that the PDMA film was less permeable to dissolved species, acting as a diffusion barrier against agents causing corrosion such as H₂O and O₂. The PDMA film coating greatly lowered the anodic current peak ascribed to the anodic dissolution of iron and the corrosion current in strongly acidic medium, 0.5?M H₂SO₄ aqueous solution (1?M?????mol?dm^??) as well as neutral medium (pH?6.86). The high anti-corrosion ability was due to a hybrid effect of the PDMA film not only as the diffusion barrier, but also as an in situ oxidant in spite of the slight redox activity of PDMA. In addition, the PDMA film is much more durable and adhesive than polyaniline film against over-oxidation.     

Digital image analysis of polymer blends morphology

Application of digital image analysis (DIA) to polymer blends morphology is discussed with examples. Various operations in DIA including two-dimensional Fourier transformation (2DFT), intensity distribution, recursive region extraction, etc. are applied to morphology of polymer blends due to spinodal decomposition (SD), nucleation 6 growth (NG), and eutectic solidification (ES). Merits and drawbacks of DIA to study polymer blends morphology are discussed and the possibility of future development is presented.     

Effects of Al concentration and resulting long-period superstructures on the plastic properties at room temperature of Al-rich TiAl single crystals

The role of Al₅Ti₃ and h-Al₂Ti long-period superstructures on the plastic properties of TiAl at room temperature is investigated on five single crystals with aluminium content comprised between 54.7 at.%, and 62.5 at.%. After annealing at 1200°C for 1?h, the Al₅Ti₃ superstructure develops in the L1₀ (γ) matrix upon increasing Al concentration except for Ti–62.5 at.%Al where h-Al₂Ti substitutes for Al₅Ti₃. The CRSS for <110]{111} first increases abruptly with the development of the Al₅Ti₃-type ordering. Then, the CRSS reaches a plateau at which dislocations assemble in groups of four to prevent extra anti-phase boundary (APB) from being engendered during glide throughout the Al₅Ti₃ phase. In Ti–62.5 at.%Al, the CRSS for ordinary slip further increases upon the precipitation of h-Al₂Ti in the L1₀ phase, whereas it decreases when the crystal is fully transformed into single-phased Al₅Ti₃. <101] superlattice dislocations are primarily activated under both the [210] and [1?1?8.6] load orientations irrespective of the Al concentration, but the dislocation microstructure strongly depends on orientation as well as on the degree of Al₅Ti₃ ordering. In the [210] orientation, the frequency of the decomposition of <101] dislocations into 1/2<110] and 1/2<112] dislocations decreases abruptly with the development of Al₅Ti₃. This is interpreted in terms of the increased difficulty to move ordinary dislocations. Under the [1?1?8.6] orientation, the density of faulted dipoles diminishes remarkably with the development of Al₅Ti₃. This is consistent with the transformation of the low energy extrinsic stacking fault of the L1₀ phase into a higher energy complex extrinsic stacking fault.