A strange novel chaotic system with fully golden proportion equilibria and its mobile microcomputer-based RNG application

A strange novel three-dimensional quadratic continuous autonomous chaotic system with fully golden proportion equilibria is proposed. It has only seven terms, three quadratic nonlinearities and one parameter ‘a’. The system equations have four equilibrium points and very interestingly all the equilibrium points have fully golden proportion values. Besides, this chaotic system has hidden amplitude control properties. The dynamic analyses of the system are presented such as equilibrium points, dissipativity, Lyapunov exponents, bifurcation diagrams, phase portraits and hidden amplitude control properties. Later, electronic circuit of the system is simulated in software and implemented in real environment. Finally, microcomputer-based random number generator (RNG) application and its NIST-800-22 tests are executed as another real-time application.     

Multiwalled boron nitride microtubes (BNMTs) shielding in thermal neutron absorbing

In this study, multiwalled boron nitride microtubes (BNMTs) were synthesised from amorphous boron powder in pure nitrogen atmosphere controlled graphite furnace at 1300°C for 6?h with amorphous boron/manganese (IV) oxide (MnO₂) catalyst mass ratio of 1/1. It was found that the synthesised BNMTs outer diameters and the lengths vary between 0.68 and 1.57?µm and between 6.79 and 31.23?µm, respectively, by the scanning electron microscope analysis. The surface layer of AISI 1040 steel material was coated with multiwalled BNMTs at 950°C for 4?h in a foundry furnace. Transport phenomena of BNMT molecules on surfaces of the steel were considered by diffusion. Neutrons from obtained ²⁴¹Am-Be source were irradiated on the ⁵⁸Fe nuclei. The irradiation properties of the without and with BNMT coated steel materials were studied in the field of gamma emitted by ⁶⁰Co. The radiation exposure rate of gamma radiation sources used at 1099 and 1291?keV, respectively. The higher peak area was obtained in steel coated with BNMT according to non-coated steel from irradiation results of samples. These results show that BNMT coated steel was more capable for radiation shielding.     

Modified jerk system with self-exciting and hidden flows and the effect of time delays on existence of multi-stability

In this paper, we report a new chaotic jerk system which shows self-excited and hidden oscillations depending on its parameters. Dynamic analysis shows that the proposed system exhibits multi-stability and coexisting attractors. To study the effect of time delays on the multi-stability feature of the system, we introduce multiple time delays in the third state variable. Investigation of dynamical properties of the time-delayed system shows the disappearance of multi-stability. Such a feature has not been reported earlier in the literatures.     

QWIP focal plane arrays on InP substrates for single and dual band thermal imagers

Alternative material systems on InP substrate provide certain advantages for mid-wavelength infrared (MWIR), long-wavelength infrared (LWIR) and dual band MWIR/LWIR quantum well infrared photodetector (QWIP) focal plane arrays (FPAs). While InP/InGaAs and InP/InGaAsP LWIR QWIPs provide much higher responsivity when compared to the AlGaAs/GaAs QWIPs, AlInAs/InGaAs system facilitates completely lattice matched single band MWIR and dual band MWIR/LWIR FPAs.We present an extensive review of the studies on InP based single and dual band QWIPs. While reviewing the characteristics of InP/InGaAs and InP/InGaAsP LWIR QWIPs at large format FPA level, we experimentally demonstrate that the cut-off wavelength of AlInAs/InGaAs QWIPs can be tuned in a sufficiently large range in the MWIR atmospheric window by only changing the quantum well (QW) width at the lattice matched composition. The cut-off wavelength can be shifted up to ～5.0 μm with a QW width of 22 Å in which case very broad spectral response (Δλ/λ_p = ～30%) and a reasonably high peak detectivity are achievable leading to a noise equivalent temperature difference as low as 14 mK (f/2) with 25 μm pitch in a 640 × 512 FPA. We also present the characteristics of InP based two-stack QWIPs with wavelengths properly tuned in the MWIR and LWIR bands for dual color detection. The results clearly demonstrate that InP based material systems display high potential for dual band MWIR/LWIR QWIP FPAs needed by third generation thermal imagers.     

Chaos-based application of a novel no-equilibrium chaotic system with coexisting attractors

Nonlinear Dynamics - Novel chaotic system designs and their engineering applications have received considerable critical attention. In this paper, a new three-dimensional chaotic system and its...     

Determination and analysis of the dispersive optical constants of the 5,5′,6,6′-tetraphenyl-2,2′-bi([1,3]dithiolo[4,5-b][1,4]dithiinylidene)–DDQ complex thin film

The synthesis and optical properties of the 5,5′,6,6′-tetraphenyl-2,2′-bi([1,3]dithiolo [4,5-b] [1,4]dithiinylidene)–2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) complex thin film were investigated by the optical characterization. The optical constants such as refractive index, extinction coefficient and absorption coefficient were determined using the transmittance T(λ) and reflectance R(λ) spectra and the refractive index dispersion was analyzed using single oscillator of Wemple–Didomenico model. The single oscillator energy E₀ and the dispersion energy E_d were calculated. The effect of temperature on refractive dispersion and optical band gap E_g is also discussed. As a result, the annealing temperatures have an important effect on refractive index of thin film.     

Three-dimensional seismic array characterization study: experiment and modeling

In the summer of 2003, the Littoral Acoustic Demonstration Center conducted an acoustic characterization experiment for a 21-element marine seismic exploration airgun array of total volume of 0.0588 m(3) (3590 in.(3)). Two Environmental Acoustic Recording System buoys, one with a desensitized hydrophone, were deployed at a depth of 758 m in a water depth of 990 m, near Green's Canyon in the Gulf of Mexico. Shots over a grid were recorded and calibrated to produce absolute broadband (up to 25 kHz) pressure-time dependencies for a wide range of offsets and arrival angles in the water column. Experimental data are analyzed to obtain maximum received zero-to-peak pressure levels, maximum received sound exposure levels, and pressure levels in 13-octave frequency bands for each shot. Experimental data are quantitatively modeled by using an upgraded version of an underwater acoustic propagation model and seismic source modeling packages for a variety of ranges and arrival angles. Experimental and modeled data show good agreement in absolute pressure amplitudes and frequency interference patterns for frequencies up to 1000 Hz. The analysis is important for investigating the potential impact on marine mammals and fish and predicting the exposure levels for newly planned seismic surveys in other geographic areas.     

Enantioselective sorption of some chiral carboxylic acids by various cyclodextrin-grafted iron oxide magnetic nanoparticles

A new enantioselective sorption approach to chiral carboxylic acid molecules such as (R)-(?)-N-(3,5-dinitrobenzoyl)phenylglycine (R)-(?)DNBPG, (S)-(+)-N-(3,5-dinitrobenzoyl)phenylglycine (S)-(+)DNBPG, (R)-(+)-N-(1-phenylethyl)phthalamic acid (R)-(+)PEPA and (S)-(?)-N-(1-phenylethyl)phthalamic acid (S)-(?)PEPA regarding their complexation with three diversely functionalized β-cyclodextrin grafted iron oxide nanoparticles in the aqueous phase, was developed. The sorption efficiencies of these carboxylic acids were carried out by high-performance liquid chromatography (HPLC) with an Ace 5 C18 column. The effects of temperatures on the sorption were also investigated. The results showed that the ether functionalized derivative of β-cyclodextrin Al-CD-MNPs has a specific affinity for (R)-(?)DNBPG at 30 °C and pH 7.0. The amine functionalized derivative of β-cyclodextrin Am-CD-MNPs has a greater affinity towards not only (S)-(?)DNBPG, but also (R)-(+)PEPA compared with their other isomers, which are the (R)-isomer of DNBPG and the (S)-isomer of PEPA at 30 °C and pH 7.0. In addition, although amide functionalized derivatives of β-cyclodextrin (Amd-CD-MNPs) have an affinity towards both isomers of some chiral carboxylic acids; no selective affinity was observed at 30 °C and pH 7.0.     

Spray‐processable thiazolothiazole‐based copolymers with altered donor groups and their electrochromic properties

Two novel thiazolo[5,4‐d]thiazole containing donor–acceptor type alternating copolymers, poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐5‐(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzTh) and poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)furan‐2‐yl)‐5‐(furan‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzFr) were synthesized by Stille coupling polymerization and their electrochemical and electrochromic properties were explored. Electrochemical activities of the spray‐casted polymer films were determined by cyclic voltammetry. To evaluate the effect of thiophene and furan moieties on the optical properties of the copolymers, spectroelectrochemistry studies were performed. To examine the switching abilities, copolymer films were subjected to a double potential step chronoamperometry in their local maximum absorptions. Both thiazolothiazole‐containing copolymers showed multichromic properties with low band‐gap values 1.7 and 1.9 eV for BTzTh and BTzFr, respectively. The decent electrochromical properties together with solution processability make them important candidates for electrochromic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3901–3906     

Determination of lead by hydride generation inductively coupled plasma mass spectrometry (HG-ICP-MS): On-line generation of plumbane using potassium hexacyanomanganate(III)

A hydride generation (HG) procedure has been described for determination of Pb by ICP-MS using potassium hexacyanomanganate(III), K₃Mn(CN)₆, as an additive to facilitate the generation of plumbane (PbH₄). Potassium hexacyanomanganate(III) was prepared in acidic medium as it was unstable in water. The stability of hexacyanomanganate(III) was examined in dilute solutions of HCl, HNO₃ and H₂SO₄. The solutions prepared in 1% v/v H₂SO₄ were found to be stable for over a period of 24 h. The least suitable medium was 1% v/v HNO₃. For generation of plumbane, acidic hexacyanomanganate(III) and sample solutions were mixed on-line along a 5-cm long tygon tubing (1.14 mm i.d.) and then reacted with 2% m/v sodium borohydride (NaBH₄). A concentration of 0.5% m/v K₃Mn(CN)₆ facilitated the generation of PbH₄ remarkably. In comparison to H₂SO₄, HCl provided broader working range for which optimum concentration was 1% v/v. No significant interferences were noted from transition metals and hydride forming elements, up to 0.5 μg mL⁻¹ levels, except Cu which depressed the signals severely. The depressive effects in the presence of 0.1 μg mL⁻¹ Cu were alleviated by increasing the concentration of K₃Mn(CN)₆ to 2% m/v. Under these conditions, the sensitivity was enhanced by a factor of at least 42 to 48. The detection limit (3 s) was 0.008 μg L⁻¹ for ²⁰⁸Pb isotope. Average signal-to-noise ratio (S/N) ranged between 18 and 20 for 1.0 μg mL⁻¹ Pb solution. The accuracy of the method was verified by analysis of several certified reference materials, including Nearshore seawater (CASS-4), Bone ash (SRM 1400), and Mussel tissue (SRM 2976). The procedure was also successfully applied to the determination of Pb in coastal seawater samples by ICP-MS.