Solid-phase extraction of fluoxetine and norfluoxetine from serum with gas chromatography-electron-capture detection

A rapid, selective, and sensitive method is described for the purification and analysis of fluoxetine and norfluoxetine using a solid-phase extraction column and gas chromatography-electron-capture detection. Linear quantitative response curves for fluoxetine and norfluoxetine are generated over a concentration range of 20-200 ng/ml. Overall extraction efficiency of the extraction procedure is found to be greater than 90% and greater than 75% with correlation coefficients of 0.997 and 0.993 for fluoxetine and norfluoxetine, respectively.     

Quantum yields for product formation in the 120-133 nm photodissociation of O2

The photodissociation of O(2) in the region from 120-133 nm has been investigated using product imaging. The spectrum in this region is dominated by transitions from the ground state to the first three vibrational levels of the E (3)Sigma(u) (-) state. The O((1)D)+O((3)P) channel is the only product channel observed by product imaging for dissociation at either 124.4 nm or 120.4 nm. The O((1)D(2)) product is aligned in the molecular frame in such a way that its J vector is perpendicular to the relative velocity vector between the O((1)D) and the O((3)P). The variation in the anisotropy of dissociation is approximately predicted by considering transitions on individual lines and then taking into account the coherent excitation of overlapping resonances. At 132.7 nm, both the O((1)D)+O((3)P) and the O((3)P)+O((3)P) channels are observed with branching ratios of 0.40+/-0.08 and 0.60+/-0.09, respectively. At 130.2 nm, the quantum yield for production of O((1)D) is 0.76+/-0.28.     

An innovative synthesis of dibenzofurans through a carbanion-induced ring transformation reaction

An innovative route for the synthesis of substituted dibenzofurans has been delineated through a ring transformation reaction of suitably functionalized 2H-pyran-2-ones by reaction with 7-methoxybenzofuran-3-one, in high yield. The novelty of the procedure lies in the creation of an aromatic ring from a 2H-pyran-2-one involving the -COCH₂-moiety of the substrate.     

Donor–acceptor complexes in copolymerization. XLIX. Cationic polymerization of donor monomers in presence of polar solvents and acrylic monomers. A revised mechanism for polymerization of comonomer complexes

α-Methylstyrene (MS) and isobutyl vinyl ether (VE) readily polymerize, styrene (S) polymerizes to a small extent, and isobutylene (IB), butadiene (BD), and isoprene (IP) fail to polymerize in the presence of catalytic amounts of AlCl₃ when propionitrile, ethyl propionate, and methyl isobutyrate are used as reaction media. MS polymerizes readily and S polymerizes with difficulty in the presence of AlCl₃ to yield homopolymers when acrylonitrile (AN) is present and copolymers with ethyl acrylate (EA) and methyl methacrylate (MMA). VE readily homopolymerizes, while IB, BD, and IP fail to polymerize in the presence of AlCl₃ and the acrylic monomers. VE readily homopolymerizes, S and MS polymerize to a very small extent, and IB, BD, and IP do not polymerize in the presence of ethylaluminum sesquichloride (EASC) in polar solvents. VE readily homopolymerizes in the presence of EASC and the acrylic monomers. MS polymerizes to a small extent in the presence of EASC and the acrylic monomers to yield equimolar copolymers with EA and MMA and a mixture of cationic homopolymer and equimolar copolymer with AN. S yields equimolar copolymers in low yield in the presence of EASC and the acrylic monomers. IB, BD, and IP in the presence of EASC do not polymerize to any significant extent when EA is present, form AN-rich copolymers and yield poly(methyl methacrylate) in the presence of MMA. A revised mechanism is presented for the formation of cationic, radical, random, and alternating copolymers as well as alternating copolymer graft copolymers in the copolymerization of donor and acceptor monomers.     

Donor properties of some flexidentate hydroxyimino-β-diketones in their rhodium(III) complexes

Summary A series of rhodium(III) complexes of certain hydroxyimino--diketones were synthesised and their structures assigned on the basis of elemental analyses and i.r. and¹H n.m.r. spectral studies, The complexes exhibit coordination through carbonyl oxygen and nitrogen of the hydroxy-imino groups in the ligands.¹H and¹³C n.m.r. studies show that the ligands exist in the isonitroso form in CDCl₃.     

Complexation behaviour of benzilmono(Iepidyl)hydrazone (BLH) toward bivalent metal ions: A potentiometric study

Potentiometric investigations on metal complexes of various bivalent metal ions, viz. UO₂(II), Cu(II), Ni(II), Co(II), Cd(II), Pb(II), Zn(II) and Mn(II) with benzilmonol(lepidy!)hydrazone (BLH) have been carried out at different ionic strengths and at different temperatures in order to determine stability constants of the complexes. Thermodynamic parameters ΔC, ΔH and ΔS have also been evaluated from temperature coefficient data. The effect of varying the dielectric constant of the medium on the stability constants of complexes has also been investigated at 30±0.5°C and μ = 0.1MNaCl. Thermodynamic stability constants and thermodynamic stabilization energies for the first transition metals have also been discussed.     

Dissociation of sulfur dioxide by ultraviolet multiphoton absorption between 224 and 232 nm

Multiphoton excitation and dissociation of SO(2) have been investigated in the wavelength range from 224 to 232 nm. Strong evidence is found for two-photon excitation to the H Rydberg state, followed by dissociation to SO + O and ionization of the SO product by absorption of a third photon. The two-photon excitation is resonantly enhanced via the C (1)B(2) intermediate state, and the two-photon yield spectrum thus bears a strong resemblance to the spectrum of this intermediate. Imaging of the O((3)P(2)), S((1)D(2)), and SO products suggests that, following dissociation of SO(2) from the H state, SO is produced in the A and B electronic states. S((1)D(2)) is produced both from two-photon dissociation of SO(2) to give S((1)D(2)) + O(2) and by single-photon dissociation of SO(+). In the former process, the O(2) is likely formed in all of its lowest three electronic states.     

An efficient synthesis of 4,5-dihydronaphtho[2,1-b]furan through a novel ring transformation of 2H-pyran-2-one

An innovative route for the synthesis of substituted naphtho[2,1-b]furan has been delineated through a ring transformation reaction of suitably functionalized 2H-pyran-2-ones by reaction with 6,7-dihydro-5H-benzofuran-4-one, in good yield.     

Photodissociation channels for N2O near 130 nm studied by product imaging

The photodissociation of N(2)O at wavelengths near 130 nm has been investigated by velocity-mapped product imaging. In all, five dissociation channels have been detected, leading to the following products: O((1)S)+N(2)(X (1)Sigma), N((2)D)+NO(X (2)Pi), N((2)P)+NO(X (2)Pi), O((3)P) + N(2)(A (3)Sigma(+) (u)), and O((3)P) + N(2)(B (3)Pi(g)). The most significant channel is to the products O((1)S) + N(2)(X(1)Sigma), with strong vibrational excitation in the N(2). The O((3)P) + N(2)(A,B):N((2)D,(2)P) + NO branching ratio is measured to be 1.4 +/- 0.5, while the N(2)(A) + O((3)P(J)):N(2)(B) + O((3)P(J)) branching ratio is determined to be 0.84+/-0.09. The spin-orbit distributions for the O((3)P(J)), N((2)P(J)), and N((2)D(J)) products were also determined. The angular distributions of the products are in qualitative agreement with excitation to the N(2)O(D (1)Sigma(+)) state, with participation as well by the (3)Pi(v) state.     

NIFTy 3 – Numerical Information Field Theory: A Python Framework for Multicomponent Signal Inference on HPC Clusters

NIFTy , “Numerical Information Field Theory,” is a software framework designed to ease the development and implementation of field inference algorithms. Field equations are formulated independently of the underlying spatial geometry allowing the user to focus on the algorithmic design. Under the hood, NIFTy ensures that the discretization of the implemented equations is consistent. This enables the user to prototype an algorithm rapidly in 1D and then apply it to high‐dimensional real‐world problems. This paper introduces NIFTy  3, a major upgrade to the original NIFTy  framework. NIFTy  3 allows the user to run inference algorithms on massively parallel high performance computing clusters without changing the implementation of the field equations. It supports n‐dimensional Cartesian spaces, spherical spaces, power spaces, and product spaces as well as transforms to their harmonic counterparts. Furthermore, NIFTy  3 is able to handle non‐scalar fields, such as vector or tensor fields. The functionality and performance of the software package is demonstrated with example code, which implements a mock inference inspired by a real‐world algorithm from the realm of information field theory. NIFTy  3 is open‐source software available under the GNU General Public License v3 (GPL‐3) at https://gitlab.mpcdf.mpg.de/ift/NIFTy/tree/NIFTy_3 .