Equilibrium studies of Mn(II), Mg(II), Ca(II), Sr(II) and Ba(II) withp-fluoro-,p-chloro-,p-bromo-,p-methyl-benzoylacetones and 1-(4-fluorophenyl)-1,3-pentanedione

The rawpH-data, obtained from the potentiometric titrations of the titled ligands with NaOH in 75% (v/v) dioxane-water mixture performed at 20, 30 and 40°C at constant ionic strength (=0.1M-NaClO₄), have been adequately corrected for dilution, and solvent effects in order to evaluate thermodynamic dissociation constants. Variance of the latter as a function of temperature has also been accounted for. The differing magnitudes of thermodynamic dissociation constants of the titled ligands have been explained on the basis of the non coplanar orientation of the phenyl ring in the ligands and a comparison has been made with those of unsubstituted benzoylacetone, dibenzoylmethane and acetylacetone.Following similar technique, thermodynamic stepwise and overall formation constants of the titled metal-ligand systems have been obtained and the results correlated with ligand basicity inverse metal crystal radii and second potentials of metals. Decrease in the free enthalpy (–G) of complexation reaction has also been evaluated.

---

Untersuchung der Gleichgewichte von Mn(II), Mg(II), Ca(II), Sr(II) und Ba(II) mit p-Fluor-, p.-Chlor-, p-Brom-, p-Methyl-benzoylaceton und 1-(4-Fluorphenyl)-1,3-pentanedion

Zusammenfassung Aus der potenitometrischen Titration der Titelverbindungen mit NaOH in 75 (v/v) Dioxan—Wasser bei, 20, 30 und 40°C bei konstanter Ionenstärke (=0,1M-NaClO₄) wurden die thermodynamischen Dissoziationskonstanten ermittelt. Verdünnungs-, Lösungsmittel-und Temperatureffekte wurden berücksichtigt. Die unterschiedlichen Dissoziationskonstanten werden mit der Nichtplanarität des Phenylrings in den Liganden erklärt. Außerdem wurden die Komplexbildungskonstanten bestimmt; sie sind in die Diskussion miteinbezogen.

     

Differential pulse polarographic determination of trace amounts of vanadium and molybdenum in various standard alloys and environmental samples after preconcentration of their morpholine-4-carbodithioates on microcrystalline naphthalene or morpholine-4-dithiocarbamate cetyltrimethyl-ammonium bromide-naphthalene adsorbent

A highly selective, sensitive, and fairly rapid and economical differential pulse polarographic (DPP) method has been reported for the determination of trace amounts of vanadium and molybdenum in standard alloys and various environmental samples. The morpholine-4-carbodithioates of these metals were retained (>99% recovery) quantitatively on microcrystalline naphthalene in the pH range 4.5-6.9 for vanadium and 1.5-4.5 for molybdenum. These metals were determined by DPP after desorption with 10 ml of 1 M HCl. Vanadium and molybdenum may also be preconcentrated by passing their aqueous solutions under similar conditions on morpholine-4-dithiocarbamate CTMAB-naphthalene adsorbent packed in a column at a flow rate of 1-5 ml min(-1) and determined similarly. The detection limits are 0.20 ppm for vanadium and 0.04 ppm for molybdenum at minimum instrumental settings (signal to noise ratio=2). The linearity is maintained in the following concentration ranges, vanadium 0.50-10.0 and molybdenum 0.10-9.0 ppm, with a correlation factor of 0.9996 (confidence interval of 95%, slopes 0.0196 and 0.01497 muA mug(-1), intercepts 3.65x10(-3) and -1.92x10(-3) respectively) and relative standard deviation of 1.1% in the microcrystalline method, while in the column method, the linearity is maintained in the concentration ranges, 0.50-6.5 for vanadium and 0.10-5.5 ppm for molybdenum with correlation factor of 0.9994 (with confidence interval of 95%, slopes 0.0194, 0.015 muA mug(-1), intercepts 3.60x10(-3) and -1.90x10(-3) respectively) and relative standard deviation of 1.4%. Various parameters such as the effect of pH, reagent, naphthalene and CTMAB concentrations, volume of aqueous phase and interference of a large number of metal ions on the estimation of vanadium and molybdenum have been studied in detail to optimize the conditions for their voltammetric determination at trace level in various standard alloys and environmental samples.     

Analysis of degradation products by thermal volatilization analysis at subambient temperatures

In the subambient thermal volatilization analysis (TVA) technique, degradation products initially at ?196°C are allowed to warm up to ambient temperature in a controlled manner under vacuum conditions, and volatilization from the sample tube to a trap at ?196°C is monitored by means of a Pirani gauge. The technique is discussed in relation to earlier TVA work in which volatilization from a heated polymer sample was followed. Design and operation of a subambient TVA system are described, and examples of the application of the technique to the study of the degradation products of seven polymers are considered.     

Electrical conduction in copper vanadate

A.C. and d.c. electrical conductivities, thermoelectric power and dielectric constant of copper vanadate (CuV₂O₆) have been measured in the temperature range 300–1000 K in order to discuss the electrical conduction in the compound. The extrinsic conduction, which takes place below 500 K, has been explained by small polaron hopping mechanism while intrinsic conduction, which takes place above 500 K, has been explained by large polaron band mechanism in view of the values of activation energy and charge carrier mobility in the temperature ranges 300–500 K and 500–1000 K.     

Mössbauer spectroscopy study of iron corrosion underneath painting system

The effect of pigments on the development of corrosion products between the painting system and metal surface when exposed to marine environments has been discussed. The pigments studied were; Red Mud Zinc chromate, Zinc chromate, Red oxide Zinc Phosphate, Manganese Phosphate Barium chromate and Basic Lead Silico Chromate. Mossbauer Spectroscopy revealed that the upper rust layer in all the cases consisted of-Fe203,-FeOOH and-FeOOH. The lower rust layer immediately in contact with the metal surface consisted of an asymmetrical doublet due to -FeOOH.     

Comparison of the catalytic activity of Au3, Au4+, Au5, and Au5- in the gas-phase reaction of H2 and O2 to form hydrogen peroxide: a density functional theory investigation

We report a detailed density functional theory (B3LYP) analysis of the gas-phase H2O2 formation from H2 and O2 on Au3, Au4+, Au5, and Au5-. We find that H2, which interacts only weakly with the Au clusters, is dissociatively added across the Au-O bond, upon interaction with AunO2. One H atom is captured by the adsorbed O2 to form the hydroperoxy intermediate (OOH), while the other H atom is captured by the Au atom. Once formed, the hydroperoxy intermediate acts as a precursor for the closed-loop catalytic cycle. An important common feature of all the pathways is that the rate-determining step of the catalytic cycle is the second H2 addition to form H2O2. The H2O2 desorption is followed by O2 addition to AunH2 to form the hydroperoxy intermediate, thus leading to the closure of the cycle. On the basis of the Gibbs free energy of activation, out of these four clusters, Au4+ is most active for the formation of the H2O2. The 0 K electronic energy of activation and the DeltaGact at the standard conditions are 12.6 and 16.6 kcal/mol respectively. The natural bond orbital charge analysis suggests that the Au clusters remain positively charged (oxidic) in almost all the stages of the cycle. This is interesting in the context of the recent experimental evidence for the activity of cationic Au in CO oxidation and water-gas shift catalysts. We have also found preliminary evidence for a correlation between the activation barrier for the first H2 addition and the O2 binding energy on the Au cluster. It suggests that the minimum activation barrier for the first H2 addition is expected for the Au clusters with 7.0-9.0 kcal/mol O2 binding energy, i.e., in the midrange of the expected interaction energy. This represents a balance between more favorable H2 dissociation when the Aun-O2 interaction is weaker and high O2 coverage when the interaction is stronger. On the basis of this work, we predict that the hydroperoxy intermediate formation can be both thermodynamically and kinetically viable only in a narrow range of the O2 binding energy (10.0-12.0 kcal/mol)-a useful estimate for computationally screening Au-cluster-based catalysts. We also show that a competitive channel for the OOH desorption exists. Thus, in propylene epoxidation both OOH radicals and H2O2 can attack the active Ti in/on the Au/TS-1 and generate the Ti-OOH sites, which can convert propylene to propylene oxide.     

Complex formation of isocytosine tautomers with PdII and PtII

Isocytosine (ICH) exists in solution as two major tautomers, the keto form with N1 carrying a proton (1a) and the keto form with N3 being protonated (1b). In water, 1a and 1b exist in equilibrium with almost equal amounts of both forms present. Reactions with a series of Pd(II) and Pt(II) am(m)ine species such as (dien)Pd(II), (dien)Pt(II), and trans-(NH(3))(2)Pt(II) reveal, however, a distinct preference of these metals for the N3 site, as determined by (1)H NMR spectroscopy. Individual species have been identified by the pD dependence of the ICH resonances. pK(a) values (calculated for H(2)O) for deprotonation of the individual tautomers complexes are 6.5 and 6.4 for the N3 linkage isomers of dienPd(II) and dienPt(II), respectively, as well as 6.2 and 6.0 for the N1 linkage isomers. The dimetalated species [(dienM)(2)(IC-N1,N3)](3+) (M = Pd(II) or Pt(II)) are insensitive over a wide range of pD. The crystal structure analysis of [(dien)Pd(ICH-N3)](NO(3))(2) is reported. Ab initio calculations have been performed for tautomer compounds of composition [(NH(3))(3)Pt(ICH)](2+), cis- and trans-[(NH(3))(2)PtCl(ICH)](+), as well as trans-[(NH(3))(2)Pt(ICH)(2)](2+). Without exception, N3 linkage isomers are more stable, in agreement with experimental findings. As to the reasons for this binding preference, an NBO (natural bond orbital) analysis for [(NH(3))(3)Pt(ICH-N3)](2+)strongly suggests that intramolecular hydrogen bonding between trans-positioned NH(3) ligands and the two exocyclic groups of the ICH is of prime importance. The calculations furthermore show a marked pyramidalization of the NH(2) group of ICH in the complex once the heterocyclic ligand forms a dihedral angle <90 degrees with the Pt coordination plane.     

Reactions of Titanium Alkoxides with N-Methylaminoalcohols

N-methylaminoalkoxides of titanium of the type Ti(OR)_4?n(O · CHR′ · CH₂ · NR″R?)_n where R = Et and Pr¹; n = 1–4; and R′ = R″ = H, R? = Me; R′ = H, R″ = R? = Me; R′ = R″ = R? = Me, synthesized by the reactions of titanium alkoxides with aminoalcohols, show interesting variations in their properties like physical state, volatility and molecular complexity. I.r. and p.m.r. spectra of these derivatives have been recorded. A few interchange reactions with methanol and tert-butanol have also been carried out. These aminoalkoxides get cleaved with acetyl chloride and undergo insertion reactions with phenylisocyanate, thus providing the first examples of insertion reactions in such derivatives.