Enhanced Exfoliation Effect of Solid Auxiliary Agent On the Synthesis of Biofunctionalized MoS2 Using Grindstone Chemistry

Mass production and commercial availability are prerequisites for the viability and wide application of MoS₂. Here, we demonstrate enhanced grindstone chemistry for a one‐step synthesis of biofunctionalized MoS₂. By adding a SiO₂ auxiliary agent the exfoliation efficiency increases from 16.23% to 58.59% and a rapid and high‐yield exfoliation of MoS₂ is seen. SiO₂ exhibits a fragmentation effect, which reduces the lateral size and facilitates the exfoliation of MoS₂, thus inducing a high‐efficient paradigm in the top‐down fabrication of biofunctionalized MoS₂ nanosheets. The as‐prepared MoS₂‐chitosan (MoS₂‐CS) nanosheets display complete disaggregation and homogeneous dispersion, as well as a high content of chitosan (ca. 20 wt%). As a proof‐of‐concept application, the MoS₂‐CS nanosheets act as a biosorbent for Pb^II removal, exhibiting a good adsorption capacity and recyclability. This green and facile enhanced grindstone chemistry with minimal use of organic solvents and high‐throughput efficiency can be extended to the fabrication of other biocompatible inorganic 2D analogues for a variety of applications.     

在玻璃转变温度及其以上温区聚苯乙烯/聚氧化乙烯共混物的动力学弛豫行为

用熔融共混法制备了不同组分的聚苯乙烯(PS)与聚氧化乙烯(PEO)共混物(PS/PEO).在玻璃转变温度T_g及其以上温区,利用相对能量耗散技术研究了该共混物的动力学行为.结果发现,在能量耗散-温度曲线上出现了两个弛豫型的耗散峰(α峰和α′峰).分析表明,α峰是与PS玻璃转变有关的特征耗散峰; α′峰则对应于一种“液-液转变”.两者的弛豫时间τ都不满足Arrhenius关系.此外,还研究了组分对这两个弛豫型耗散峰的影响,并给予了定性的解释. 关键词： 相对能量耗散 玻璃转变 力学弛豫     

为什么要选择电表的合适量程

电表的量程选择合适，能减小测量值的误差．中学常用的电压表（J0408）、电流表（J0407）准确度均为2．5级．现根据电表的准确度来确定实验误差范围．     

过路收费站对高速公路交通的影响

基于Nagel-Schreckenberg交通流模型，建立了关于单车道电子收费和人工收费系统的元胞自动机交通流模型.通过计算机数值模拟，得到了混合付费车流在不同参数下交通流模型的基本图，并对电子收费和人工收费共存系统的交通流特性进行了分析和讨论.     

Electron-impact dissociation and transient properties of a stored LiH2 - beam

The fragmentation of LiH₂ ^- anions after electron impact was investigated at the heavy-ion storage ring TSR. The main reaction channel was found to be electron detachment followed by a breakup into LiH + H. In the first ms after production of the molecular ions in a cesium sputtering ion source, additional contributions were observed in the Li + H₂ and Li^- + H₂ channels, hinting at an initial population of a short-lived state of the anion. To gain a better understanding of the mechanisms underlying the observed behavior of the system, ab initio calculations of relevant potential energy surfaces were performed at selected geometries. The experimental findings are discussed in the light of these calculations.     

荧光显微镜研究极端pH值诱导磷脂支撑膜的侧向再组织

利用荧光显微镜研究了极端pH值诱导支撑磷脂双层膜的侧向再组织.结果表明,在强酸/强碱性溶液中,流动性较好的二油酰磷脂酰胆碱支撑膜出现破裂、分离、出芽或生出微管等与细胞内吞和外排相似的现象.基于极性分子与H+/H3O+或OH-的相互作用,以电中性的磷脂首基为核吸附溶液中的H+/H3O+或OH-.当磷脂膜上下叶吸附的电荷量不同时,引起两叶有效面积差,即磷脂膜曲率不对称,从而诱发磷脂膜出现各种结构和动力学的响应.本研究有助于理解极端环境对生物膜的影响,为研究生物膜的形变过程提供了参考.     

Stability and electronic properties of carbon in α-Al2O3

The stability and electronic properties of carbon in α-Al₂O₃ are investigated using density functional theory. In the host lattice, the substitutional C prefers the Al site under the O-rich conditions, whereas the O site is preferred by carbon under the Al-rich conditions. The calculated results predict a direct relationship between the thermodynamic and optical transition levels with the degree of the local distortion induced by C in the alumina lattice. We also find C at the O site acts as a charge compensator to stabilize the F⁺ center, thereby enhancing the TL signal at 465 K. Also, C at Al site can serve as electron traps for TL emission process in α-Al₂O₃.     

非临界相位匹配RTP晶体1.6 μm光参量振荡器

采用非临界相位匹配切割,尺寸4 mm4 mm20 mm的磷酸钛氧铷（RTP）晶体作为非线性光学晶体,进行了半导体激光端面抽运Nd:YAG/RTP的内腔式光参量振荡获得人眼安全激光的实验研究。对比了不同声光调Q重复频率下的信号光输出特性。在10.5 W的抽运功率和15 kHz的重复频率下,获得了最高900 mW的1.62 m人眼安全激光输出,光光转换效率达8.6%。1.62 m信号光和对应的1.06 m基频光的脉冲宽度分别为4.6和8.2 ns。信号光中心波长在1618 nm,谱线宽度小于0.5 nm。     

The analysis of spatial light to Bragg fiber coupling ratio

On the basis of the electromagnetic field mode matching theory, the coupling efficiency ratio from spatial light to Bragg fiber is analyzed, which shows that the coupling efficiency ratio is related to the radius of focused facular, the core radius of Bragg fiber and wave number of the core. By optimizing the value of such parameters appropriately, the Bragg fiber coupling efficiency ratio can be improved. It is also important for the analysis of the coupling efficiency of Bragg fiber, which can be applied to the free optical communication system and laser radar system.