The effect of structural variations on aromatic polyethers for high‐temperature PEM fuel cells

Three series of new aromatic polyether sulfones bearing phenyl, p‐tolyl or carboxyl side groups, respectively, and polar pyridine main chain groups were developed. Most of the polymeric materials presented high molecular weights and excellent solubility in common organic solvents. More importantly, they formed stable, self‐standing membranes that were thoroughly characterized in respect to their thermal, mechanical and oxidative stability, their phosphoric acid doping ability and ionic conductivity. Particularly, the copolymers bearing side p‐tolyl or carboxyl groups fulfill all necessary requirements for application as proton electrolyte membranes in high temperature fuel cells, which are glass transition temperatures higher than 220 °C, thermal stability up to 400 °C, oxidative stability, high doping levels (DLs) and proton conductivities of about 0.02 S/cm. Initial single fuel cell results at high temperatures, 160 °C or 180 °C, using a copolymer bearing p‐tolyl side groups with a relatively low DLs around 200 wt % and dry H₂/Air feed gases, revealed efficient power generation with a current density of 0.5 A/cm² at 500 mV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fast screening of perfluorooctane sulfonate in water using vortex-assisted liquid-liquid microextraction coupled to liquid chromatography-mass spectrometry

Fast screening of trace amounts of the perfluorooctane sulfonate anion (PFOS) in water samples was performed following a simple, fast and efficient sample preparation procedure based on vortex-assisted liquid-liquid microextraction (VALLME) prior to liquid chromatography-mass spectrometry. VALLME initially uses vortex agitation, a mild emulsification procedure to disperse microvolumes of octanol, a low density extractant solvent, in the aqueous sample. Microextraction under equilibrium conditions is thus achieved within few minutes. Subsequently, centrifugation separates the two phases and restores the initial microdrop shape of the octanol acceptor phase, which can be collected and used for liquid chromatography-single quadrupole mass spectrometry analysis. Several experimental parameters were controlled and the optimum conditions found were: 50 μL of octanol as the extractant phase; 20 mL aqueous donor samples (pH=2); a 2 min vortex extraction time with the vortex agitator set at a 2500 rpm rotational speed; no ionic strength adjustment. Centrifugation for 2 min at 3500 rpm yielded separation of the two phases throughout this study. Enhanced extraction efficiencies were observed at low pH which was likely due to enhanced electrostatic interaction between the negatively PFOS molecules and the positively charged octanol/water interface. The effect of pH was reduced in the presence of sodium chloride, likely due to electrical double layer compression. The linear response range for PFOS was from 5 to 500 ng L(-1) (coefficient of determination, r(2), 0.997) and the relative standard deviation for aqueous solutions containing 10 and 500 ng L(-1) PFOS were 7.4% and 6.5%, respectively. The limit of detection was 1.6 ng L(-1) with an enrichment factor of approximately 250. Analysis of spiked tap, river and well water samples revealed that matrix did not affect extraction.     

A quantitative western blot technique using TMB: Comparison with the conventional technique

Numerous molecular biological experiments performed throughout the world require the detection or quantification of a protein of interest. Western blotting is one of the most popular techniques used for this purpose and offers quantitative information with the aid of specialized software. However, its dependence on the picture that is captured, and the background and the absence of a common protocol prevent the technique from being completely quantitative. To overcome these obstacles, we present a simple and reliable assay that is similar to the regular technique, with the exception of the last stage of band visualization and quantification. We propose that small pieces of the blot that include the protein of interest can be cut and dipped in a small volume of 3,3',5,5'-tetramethylbenzidine solution, giving a colorimetric signal with linear dependence on the quantity of the protein. The reaction is stopped with H₂SO₄, and the signal is measured in a plate reader. This modification shows high linearity without additional costs and can be applied for both purified proteins and proteins found in a lysate. The results obtained with our proposed technique were compared with those obtained by the conventional method and proved to be more reliable.     

Side‐chain terpyridine polymers through atom transfer radical polymerization and their ruthenium complexes

Polymers containing side‐chain terpyridine ligands of well‐defined architectures and controllable molecular weights and molecular weight distributions are reported. These polymers were synthesized by the atom transfer radical polymerization (ATRP) of a newly synthesized terpyridine monomer with three functional initiators. The obtained polymers were characterized with ¹H NMR and gel permeation chromatography techniques. The efficiency of the ATRP technique and the overall control of the molecular characteristics of the polymers were demonstrated by a kinetic study of the polymerization reaction. Subsequently, the ruthenium(III)/ruthenium(II) complexation chemistry was employed for the attachment of bis(dodecyloxy)‐functionalized terpyridine moieties onto each side 2,2′:6′,2″‐terpyridine unit of the main polymeric backbone. Thus, the grafting approach was successfully combined with the metal–ligand coordination chemistry for the preparation of highly soluble polymeric complexes. The resulting complexes were fully characterized by means of ¹H NMR, gel permeation chromatography, and ultraviolet–visible spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4838–4848, 2005     

Synthesis, characterization and Stat3 inhibitory properties of the prototypical platinum(IV) anticancer drug, [PtCl3(NO2)(NH3)2] (CPA-7)

This paper describes a reinvestigation of the literature concerning the synthesis and structural characterization of the platinum(IV)-based anticancer drug known as CPA-7 and believed to be the compound fac-[PtCl3(NO2)(NH 3)2]. CPA-7 has previously been extensively investigated for its ability to control tumor cell growth by inhibition of Stat3 signaling, but very little information is available concerning its synthesis or spectroscopic properties. A reproducible synthetic route is shown to produce an active material which is characterized by IR and (1)H, (14)N, (15)N, and (195)Pt NMR spectroscopy, and single crystal X-ray crystallography. The freshly prepared drug is obtained as a single isomer which may in fact be fac- or mer-[PtCl3(NO2)(NH3)2], but recrystallization resulted in a disordered crystal containing approximately equal amounts of the two geometric isomers.     

Aspects of Entanglement in Quantum Many-Body Systems

Knowledge of the entanglement properties of the wave functions commonly used to describe quantum many-particle systems can enhance our understanding of their correlation structure and provide new insights into quantum phase transitions that are observed experimentally or predicted theoretically. To illustrate this theme, we first examine the bipartite entanglement contained in the wave functions generated by microscopic many-body theory for the transverse Ising model, a system of Pauli spins on a lattice that exhibits an order-disorder magnetic quantum phase transition under variation of the coupling parameter. Results for the single-site entanglement and measures of two-site bipartite entanglement are obtained for optimal wave functions of Jastrow-Hartree type. Second, we address the nature of bipartite and tripartite entanglement of spins in the ground state of the noninteracting Fermi gas, through analysis of its two- and three-fermion reduced density matrices. The presence of genuine tripartite entanglement is established and characterized by implementation of suitable entanglement witnesses and stabilizer operators. We close with a broader discussion of the relationships between the entanglement properties of strongly interacting systems of identical quantum particles and the dynamical and statistical correlations entering their wave functions.     

Trace Elements in Pleurotus Ostreatus,P. Eryngii,and P. Nebrodensis Mushrooms Cultivated on Various Agricultural By-Products

Abstract

Mushrooms are efficient accumulators of essential and toxic elements. Although oyster (Pleurotus spp.) mushrooms are widely commercialized and consumed, few data exist regarding trace elements content and bioaccumulation in cultivated P. ostreatus and P. eryngii, while no data are available for P. nebrodensis. The contents of Al, As, Ba, Cd, Co, Cr, Cs, Cu, Fe, K, Mn, Na, Ni, Pb, Rb, Sr, V, and Zn were monitored using inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (AES) in P. ostreatus, P. eryngii, and P. nebrodensis mushrooms and their cultivation substrates that include wheat straw (WHS), grape marc (GMC), olive leaves (OLV), and two-phase olive mill wastes (OMW), separately or in mixtures. Bioaccumulation factors (BAFs) less than 0.3 were obtained for Al, Ba, Co, Cr, Fe, Mn, Ni, Pb, Sr, and V; BAFs exceeding 1 for K?>?Zn?>?Cd?>?Cr?>?Rb?>?As, while the BAFs for Na were less 0.7. Mushrooms grown on OLV and OMW presented lower BAFs than those grown on WHS and GMC for all elements except for K, Cd, and Cu. P. ostreatus was an effective accumulator for Cr, Fe, and Zn; P. eryngii for Al, Cs, Ni, and V; and P. nebrodensis for As and Cd. The estimated daily intakes (μg kg^?1 body weight) from mushroom consumption were less than 0.010 for As, Cd, Co, Cs, Pb, and V, 0.010–0.10 for Ba, Cr, Ni, and Sr, 0.10–5.0 for Al, Cu, Fe, Mn, Rb, and Zn, 65–83 for Na, and 858–1030 for K. Overall, the mushrooms studied provide significant amounts of K, adequate amounts of Mn and Zn and low amounts of Na and toxic elements.     

A Unified Mechanism for the PhCOCOOH-mediated Photochemical Reactions: Revisiting its Action and Comparison to Known Photoinitiators

Since 2014, we have introduced in literature the use of phenylglyoxylic acid (PhCOCOOH), a small and commercially available organic molecule, as a potent promoter in a variety of photochemical processes. Although PhCOCOOH has a broad scope of photochemical reactions that can promote, the understanding of its mode of action in our early contributions was moderate. Herein, we are restudying and revisiting the mechanism of action of PhCOCOOH in most of these early contributions, providing a unified mechanism of action. Furthermore, the understanding of its action as a photoinitiator opened a new comparison study with known and commercially available photoinitiators.     

Determination of L-carnitine in food supplement formulations using ion-pair chromatography with indirect conductimetric detection

A novel method for the determination of L-carnitine in food supplement formulations was developed and validated, using ion-pair chromatography with indirect conductimetric detection. The chromatographic method was based on a non-polar (C18) column and an aqueous octanesulfonate (0.64 mM) eluent, acidified with trifluoroacetic acid (5.2 mM). The retention time was 5.4 min and the asymmetry factor 0.65. A linear calibration curve from 10 to 1000 microg/ml (r= 0.99998), with a detection limit of 2.7 microg/ml (25 microl injection volume), a repeatability %RSD of 0.8 (40 microg/ml, n = 5) and reproducibility %RSD of 2.6 were achieved. The proposed method was applied for the determination of carnitine in oral solutions and capsules. No interference from excipients was found and the only pretreatment step required was the appropriate dilution with the mobile phase. Recovery from spiked samples was ranged from 97.7 to 99.7% with a precision (%RSD, n = 3) of 0.01-2.1%.     

How Many Phosphoric Acid Units Are Required to Ensure Uniform Occlusion of Sterically Stabilized Nanoparticles within Calcite?

Polymerization‐induced self‐assembly (PISA) mediated by reversible addition–fragmentation chain transfer (RAFT) polymerization offers a platform technology for the efficient and versatile synthesis of well‐defined sterically stabilized block copolymer nanoparticles. Herein we synthesize a series of such nanoparticles with tunable anionic charge density within the stabilizer chains, which are prepared via statistical copolymerization of anionic 2‐(phosphonooxy)ethyl methacrylate (P) with non‐ionic glycerol monomethacrylate (G). Systematic variation of the P/G molar ratio enables elucidation of the minimum number of phosphate groups per copolymer chain required to promote nanoparticle occlusion within a model inorganic crystal (calcite). Moreover, the extent of nanoparticle occlusion correlates strongly with the phosphate content of the steric stabilizer chains. This study is the first to examine the effect of systemically varying the anionic charge density of nanoparticles on their occlusion efficiency and sheds new light on maximizing the loading of guest nanoparticles within calcite host crystals.