Instabilities in free-surface electroosmotic flows

Instability of a thin electrolyte film undergoing a direct current electroosmotic flow has been investigated. The film with a compliant electrolyte–air interface is flowing over a rigid charged substrate. Unlike previous studies, inclusion of the Maxwell stresses in the formulation shows the presence of a new finite wavenumber shear-flow mode of instability, alongside the more frequently observed long-wave interfacial mode. The shear mode is found to be the dominant mode of instability when the electrolyte–solid and electrolyte–air interfaces are of opposite charge or of same charge but have very large zeta-potential at the electrolyte–air interface. The conditions for mode-switch (interfacial to shear) and the direction of the travelling waves are discussed through stability diagrams. Interestingly, the analysis shows that when the interfaces are of nearly same zeta potential, the ‘free’ electrolyte–air interface behaves more like a ‘stationary’ wall because of the ion transport in the reverse direction of the flow.     

Incorporation of azide sugar analogue decreases tumorigenic potential of breast cancer cells by reducing cancer stem cell population

The azido sugar,GalNAz,was successfully used for imaging and perturbing protein glycosylation in triple-negative breast cancer cell line,MDA-MB-231.After the incorporation of GalNAz in the triple-negative breast cancer cell line,the tumorigenicity of these cells was decreased.Results from gene analysis and drug treatment suggest that the tumorigenicity decrease may be attributed to the reduction of cancer stem cell population.Possible mechanisms of GalNAz induced cancer stem cells(CSCs) proportion change are discussed.     

Highly selective synthesis of single-walled carbon nanotubes from methane in a coupled Downer-turbulent fluidized-bed reactor

For the synthesis of single-walled carbon nanotubes (SWCNTs) from CH₄ over a Fe/MgO catalyst, we proposed a coupled Downer-turbulent fluidized-bed (TFB) reactor to enhance the selectivity and yield (or production rate) of SWCNTs. By controlling a very short catalyst residence time (1–3 s) in the Downer, only part of Fe oxides can be reduced to form Fe nano particles (NPs) available for the growth of SWCNTs. The percentage of unreduced Fe oxides increased and the yield of SWCNTs decreased accordingly with the increase of catalyst feeding rate in Downer. SWCNTs were preferentially grown on the catalyst surface and inhibited the sintering of the Fe crystallites which would be formed thereafter in the downstream TFB, evidenced by TEM, Raman and TGA. The coupled Downer-turbulent fluidized-bed reactor technology allowed higher selectivity and higher production rate of SWCNTs as compared to TFB alone.     

New Cytotoxic Triterpenoids from the Aerial Parts of Euphorbia sieboldiana

Phytochemical investigation of the EtOH extract of Euphorbia sieboldiana led to the isolation of four new oleanane‐type triterpenoids, (1β,2α,3β,19β)‐1,2,3,19‐tetrahydroxyolean‐12‐en‐28‐oic acid, (1β,3β,19β)‐1,3,19‐trihydroxyolean‐12‐en‐28‐oic acid, (1β,2α,3β,16β,19β)‐1,2,3,16,19‐pentahydroxyolean‐12‐en‐28‐oic acid, and (1β,2α,3β,19β,23)‐1,2,3,19,23‐pentahydroxyolean‐12‐en‐28‐oic acid, along with 16 known compounds. Their structures were established by extensive 1D‐ and 2D‐NMR, as well as other spectral analyses. Biological evaluation of the four new triterpenoids revealed potent cytotoxic activities against HeLa and Hep‐G2 cells.     

H2S splitting on Cu(110): Insight from combined periodic density functional theory calculations and microkinetic simulation

Practical copper (Cu)‐based catalysts for the water–gas shift (WGS) reaction was long believed to expose a large proportion of Cu(110) planes. In this work, as an important first step toward addressing sulfur poisoning of these catalysts, the detailed mechanism for the splitting of hydrogen sulfide (H₂S) on the open Cu(110) facet has been investigated in the framework of periodic, self‐consistent density functional theory (DFT‐GGA). The microkinetic model based on the first‐principles calculations has also been developed to quantitatively evaluate the two considered decomposition routes for yielding surface atomic sulfur (S*): (1) H₂S → H₂S* → SH* → S* and (2) 2H₂S → 2H₂S* → 2SH* → S* + H₂S* → S* + H₂S. The first pathway proceeding through unimolecular SH* dissociation was identified to be feasible, whereas the second pathway involving bimolecular SH* disproportionation made no contribution to S* formation. The molecular adsorption of H₂S is the slowest elementary step of its full decomposition, being related with the large entropy term of the gas‐phase reactant under realistic reaction conditions. A comparison of thermodynamic and kinetic reactivity between the substrate and the close‐packed Cu(111) surface further shows that a loosely packed facet can promote the S* formation from H₂S on Cu, thus revealing that the reaction process is structure sensitive. The present DFT and microkinetic modeling results provide a reasonably complete picture for the chemistry of H₂S on the Cu(110) surface, which is a necessary basis for the design of new sulfur‐tolerant WGS catalysts. © 2013 Wiley Periodicals, Inc.     

Phosphate Removal from Aqueous Solution by an Effective Clay Composite Material

Adsorption is an effective treatment process for removing phosphorus and thus controlling eutrophication. In this study, a clay composite material called Al–dolomite–montmorillonite (Al–DM) was prepared and characterized. Al–DM performed well with respect to phosphate removal, with its performance depending on the Al–DM loading, contact time, initial phosphorus concentration and initial solution pH. Adsorption mechanisms were investigated by conducting batch tests on phosphate adsorption using the Al–DM. The adsorption process fitted both the pseudo-second-order kinetics model and the intra-particle diffusion model. The Langmuir, Freundlich and BET models all adequately described the adsorption isotherm data. Thermodynamic studies showed that the adsorption process was endothermic and spontaneous in nature. Al–DM is an effective adsorbent for phosphate removal mainly due to its hierarchical porous structures as shown by characterization with SEM and EDS. Chemical changes occurring before and after adsorption in a water environment indicated that Al–DM had little negative effect on water quality.     

Preparation of Hyaluronic Acid Micro-Hydrogel by Biotin–Avidin-Specific Bonding for Doxorubicin-Targeted Delivery

Hyaluronic acid is a naturally ionic polysaccharide with cancer cell selectivity. It is an ideal candidate material for delivery of anticancer agents. In this study, hyaluronic acid (HA) micro-hydrogel loaded with anticancer drugs was prepared by the biotin–avidin system approach. Firstly, carboxyl groups on HA were changed into amino groups with adipic acid dihydrazide (ADH) to graft with biotin by 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride named as HA–biotin. When HA–biotin solution mixed with doxorubicin hydrochloride (DOX·HCl) was blended with neutravidin, the micro-hydrogels would be formed with DOX loading. If excess biotin was added into the microgel, it would be disjointed, and DOX will be released quickly. The results of the synthesis procedure were characterized by ¹H-NMR and FTIR; ADH and biotin have been demonstrated to graft on the HA molecule. A field emission scanning electron microscope was used to observe morphologies of HA micro-hydrogels. Furthermore, the in vitro DOX release results revealed that the release behaviors can be adjusted by adding biotin. Therefore, the HA micro-hydrogel can deliver anticancer drugs efficiently, and the rate of release can be controlled by biotin-specific bonding with the neutravidin. Consequently, the micro-hydrogel will perform the promising property of switching in the specific site in cancer therapy.     

具有变时滞和马尔可夫切换的随机递归神经网络的弱收敛(英文)

本文研究了具有变时滞和马尔可夫切换的随机递归神经网络的弱收敛,通过运用Lyapunov函数、随机分析技巧和推广了的Halanay不等式,得到了上述模型为弱收敛的充分性条件,并且我们揭示了对上述递归神经网络模型所确定的segment过程的转移概率的极限分布是此模型的解过程的唯一的遍历不变概率测度.此外,我们还给出了例子和数值模拟来说明我们结论的正确性.     

Iridium‐Catalyzed Regioselective Silylation of Aromatic and Benzylic C?H Bonds Directed by a Secondary Amine

Reported herein is an iridium‐catalyzed, regioselective silylation of the aromatic C H bonds of benzylamines and the benzylic C H bonds of 2,N‐dialkylanilines. In this process, (hydrido)silyl amines, generated in situ by dehydrogenative coupling of benzylamine or aniline with diethylsilane, undergo selective silylation at the C H bond γ to the amino group. The products of this silylation are suitable for subsequent oxidation, halogenation, and cross‐coupling reactions to deliver benzylamine and arylamine derivatives.     

Revisit of a series of ICT fluorophores: skeletal characterization,structural modification,and spectroscopic behavior

We have revisited the synthesis of a series of ICT fluorophores, which were reported to have a core structure of 8-oxo-8H-acenaphtho[1,2-b]pyrrol-9-carbonitrile. However, based on the 2D NMR and X-ray diffraction analysis, their core structure was corrected as 1-oxo-1H-phenalene-2,3-dicarbonitrile (1). Compound 1 shows a highly electron-deficient nature and can easily undergo oxidative S_NAr^H reaction on the naphthyl ring to produce a series of novel ICT fluorophores. The regioselectivity of this substitution reaction was studied by introduction of representative nucleophiles. Moreover, due to the strong rigidity and efficient ICT nature, the obtained fluorescent dyes display very good spectroscopic properties even in an aqueous environment.