Impact of composition ratio on the structure and optical properties of (1-x)MnFe2O4/(x)ZnMn2O4 nanocomposite

($1-x$)MnFe$_{2}$O$_{4}$ (MFO)/$x$ZnMn$_{2}$O$_{4}$ (ZMO) ($x=0$, 0.2, 0.5, 0.8, and 1.0) nanocomposite samples were prepared using co-precipitation procedure. The phase percentage, cell parameters, and crystallite size of MFO and ZMO phases in each nanocomposite sample were calculated using Rietveld refinement procedure. The x-ray diffraction (XRD) analysis and Fourier-transform infrared spectroscopy techniques established the variation in the lattice parameters of each phase are due to permutation of all cations among the octahedral and tetrahedral sites of MFO and ZMO. The different oxidation states of different ions in all samples were determined using x-ray photoelectron spectroscopy (XPS) technique. The variation in absorbance of the nanocomposite samples with composition parameter ($x$) is dependent on the wavelength region. The optical bandgap of the nanocomposite samples is decreased as the content of ZMO phase increased. The effect of alloying on the refractive index, extinction coefficient, dielectric constant, optical conductivity, and the nonlinear optical behaviors of all samples were studied in detail. The nanocomposite sample $x=0.5$ disclosed upgraded optical parameters with the highest refractive index, optical conductivity, and PL intensity, which nominate it to be functional in various application fields.     

A technique for digital steganography using chaotic maps

Chaos has been applied extensively in secure communication over the last decade, but most of the chaotic security protocols defined, are cryptographically weak or slow to compute. Also, study of chaotic phenomena as application in security area is not discussed in detail. In this paper, we have intensely studied chaos, their influence in secure communications and proposed a steganography technique in spatial domain for digital images based upon chaotic maps. By applying chaos effectively in secure communication, the strength of the overall anticipated algorithm has been increased to a significant level. In addition, few security statistical analyses such as correlation, entropy, energy, contrast, homogeneity, peak signal to noise ratio, and mean square error have also been carried out and shown that it can survive against various differential attacks such as the known message attack, known cover attack, known stego attack, and stego only attack.     

A heat transfer model for incorporating carbon foam fabrics in firefighter’s garment

In the present work, a numerical study was performed to predict and investigate the performance of a thermal protection system for firefighter’s garment consisting of carbon foam fabric in both the outer shell and the thermal liner elements. Several types of carbon foam with different thermal conductivity, porosity, and density were introduced to conduct a parametric study. Additionally, the thickness of the introduced carbon foam fabrics was varied to acquire optimum design. Simulation was conducted for a square planar 2D geometry of the clothing comprising of different fabric layers and a double precision pressure-based implicit solver, under transient state condition was used. The new anticipated thermal protection system was tested under harsh thermal environmental conditions that firefighters are exposed to. The parametric study showed that employing carbon foam fabric with one set of designed parameters, weight reduction of 33 % in the outer shell, 56 % in the thermal liner and a temperature reduction of 2 % at the inner edge of the garment was achieved when compared to the traditional firefighter garment model used by Song et al. (Int J Occup Saf Ergon 14:89–106, 2008). Also, carbon foam fabric with another set of designed parameters resulted in a weight reduction of 25 % in the outer shell, 28 % in the thermal liner and a temperature reduction of 6 % at the inner edge of the garment. As a result, carbon foam fabrics make the firefighter’s garment more protective, durable, and lighter in weight.     

KO(t)Bu mediated synthesis of phenanthridinones and dibenzoazepinones

Synthesis of substituted phenanthridinones and dibenzoazepinones has been realized from 2-halo-benzamides in the presence of potassium tert-butoxide and a catalytic amount of 1,10-phenanthroline or AIBN. This new carbon-carbon bond forming reaction gives direct access to various biaryl lactams containing six- and seven-membered rings chemoselectively. Carbon-carbon coupling seems to proceed by the generation of a radical in the amide ring which leads to C-H arylation of aniline.     

Anti-HIV-1 and cytotoxicity of the alkaloids of Erythrina abyssinica Lam. growing in Sudan

Erythrina abyssinica Lam. is an important medicinal plant growing in Sudan; its seeds were investigated for the first time for their alkaloidal constituents and biological activity. The in vitro cytotoxicity of the crude alkaloidal fraction (CAF) against the cell lines HeLa, Hep-G2, HEP-2, HCT116, MCF-7 and HFB4 showed promising activity, with IC?? values of 13.8, 10.1, 8.16, 13.9, 11.4 and 12.2?μg?mL?1, respectively. Doxorubicin (positive control) showed in vitro cytotoxic activity with IC?? values 3.64, 4.57, 4.89, 3.74, 2.97 and 3.96?μg?mL?1, respectively. Bioassay-guided fractionation and isolation of the CAF led to the isolation of five Erythrina alkaloids, identified as erythraline, erysodine, erysotrine, 8-oxoerythraline and 11-methoxyerysodine. These were evaluated for their in vitro cytotoxic activity against Hep-G2 which resulted in IC?? values 17.60, 11.80, 15.80, 3.89 and 11.40?μg?mL?1, respectively. Furthermore, in vitro cytotoxic activity against HEP-2 was evaluated, which resulted in IC?? values 15.90, 19.90, 21.60, 18.50 and 11.50?μg?mL?1, respectively. The CAF caused a reduction in the viability of mock-infected MT-4 cells with a CC?? of 53?μM and a 50% protection of MT-4 cells against HIV-1 induced cytopathogeneticy with a EC?? of >53?μM, compared with EFV as a positive control, which had a CC?? of 45?μM and an EC?? of 0.003?μM. We concluded that the isolated alkaloids were responsible for the carcinogenic actions of the plant extract previously reported in the literature.     

Dual labeling of biomolecules using MeCAT and DOTA derivatives: application to quantitative proteomics

In this study, single and dual labeling of primary amino and thiol groups of target peptides is presented as a proof of concept. The proposed method allows flexible, independent and sequential labeling of the mentioned residues using lanthanides introduced via DOTA-complexes (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid). The efficiency of the method was optimized using cysteine-containing standard peptides and then applied to bovine serum albumin (BSA) and human serum albumin (HSA) to demonstrate qualitative and quantitative aspects of this strategy. For amino labeling, cysteinyl peptides were immobilized on Sepharose-6B resin and labeled with DOTA-NHS ester followed by metallation with lanthanides. Thiol labeling was carried out using lanthanide-containing metal-coded affinity tags (MeCAT) after elution of peptides from the resin. Complete dual labeling of the standard peptides was demonstrated by liquid chromatography electrospray ionization mass spectrometry, whereas more than 80% of the detected peptides of BSA and HSA were completely dual-labeled. Parallel detection by LC coupled to inductively coupled plasma mass spectrometry (ICP-MS) delivered reliable quantitative information. Thus, the versatile lanthanide choice in both labeling steps allowed estimating primary amino and thiol stoichiometries for the studied samples using different lanthanides. On the other hand, enhancement of ICP-MS signal was achieved as expected when all positions were labeled with the same lanthanide. Finally, linear calibrations of the signal for most of the labeled peptides by standard additions of digested BSA showed a suitable behaviour for quantitative applications and demonstrated the pre-concentration capability of the employed resin.     

Comparative study between gas phase and liquid phase for the production of DMC from methanol and CO2

Direct synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide over Co1.5PW12O40 in liquid and in gas phase is investigated. The synthesized catalyst has been characterized by means of FTIR and XRD. Liquid phase experiment results showed that high pressures are favorable for the synthesis of DMC. However, DMC formation is limited by the reaction with co-produced water. DMC selectivity is more strongly dependent on the temperature than on the pressure of CO2. As for the reactions in gas phase, it has been found that both CH3OH conversion and DMC selectivity decreased with increasing temperature, owing to the decomposition of DMC at high temperatures. High temperatures and more amount of Co1.5PW12O40 catalyst favor the formation of dimethoxymethane (DMM) and methyl formate (MF).     

Ionothermal synthesis of polyoxometalates

An emerging approach: In the ionothermal synthesis of transition-metal-oxide clusters an ionic liquid acts as a solvent, structure-directing agent, and charge-compensating species. The method may open new convenient routes for the synthesis of polyoxometalate-based materials.     

Comparison of the photoelectrochemical oxidation of methanol on rutile TiO2 (001) and (100) single crystal faces studied by intensity modulated photocurrent spectroscopy

The photooxidation of methanol as a model substance for pollutants on rutile TiO(2) (001) and (100) surfaces was investigated using intensity modulated photocurrent spectroscopy (IMPS). The results are analyzed in view of the influence of the surface structure, the methanol concentration and the electrode potential on the rate constants of charge transfer and recombination. The obtained results have been explained with a model combining the theory of IMPS for a bulk semiconductor surface and the nature of the surface-bound intermediates (alternatively mobile or immobile OH˙ radicals). The results indicate that water photooxidation proceeds via mobile OH˙ radicals on both surfaces, while methanol addition gives rise to the involvement of immobile OH˙ radicals on the (100) surface. Detailed analysis in view of the surface structures suggests that the latter observation is due to efficient electron transfer from bridging OH˙ radicals on the (100) surface to methanol, while coupling of two of these radicals occurs in the absence of methanol, making them appear as mobile OH˙ radicals. In the case of the (001) surface, the coupling reaction dominates even in the presence of methanol due to the smaller distance between the bridging OH˙ radicals, leading to more efficient water oxidation, but less efficient methanol photooxidation on this surface.     

Intimate electronic coupling in cationic homodimeric iridium(III) complexes

Herein, we report two new cationic iridium(III) homodinuclear structures linked through a diyne moiety at the 5-position of the bipyridyl ligand (1,4-di(2,2'-bipyridin-5-yl)buta-1,3-diyne) and compare these to mononuclear model systems bearing a 5-ethynyl-2,2'-bipyridine ligand. Low energy bands observed in the absorption spectra point to charge-transfer transitions for all four complexes, with these bands red-shifted in the case of the two dinuclear complexes. Electrochemical studies show metal-centred oxidation and ligand-centred first reduction potentials. In the case of the dimer bearing 2-phenylpyridine (ppyH) cyclometallating ligands, cyclic voltammetry (CV) measurements reveal two one-electron oxidation waves and a corresponding reduction in the HOMO-LUMO gap (ΔE(red-ox)) compared to a mononuclear system, pointing to a significant electronic coupling between the two iridium(III) metals. The room temperature emission spectrum of this dimer is also bathochromically shifted, corroborating the CV data. In the case of the iridium dimer bearing 2-(2,4-difluorophenyl)-5-methylpyridine (dFMeppy) ligands, only a single one-electron oxidation wave is observed, but with the expected smaller ΔE(red-ox) value, compared to its mononuclear counterpart. The emission spectra at room temperature are generally broad and featureless with only modest quantum efficiencies (Φ(PL) = 1.4-8.4%) in 2-methyltetrahydrofuran (2-MeTHF) solution. All complexes emit at 77 K with lifetimes on the order of 4 μs. A combined density functional theory (DFT) and time-dependent DFT (TDDFT) study reveals that the emission process is best described as a mixed metal-to-ligand/ligand-to-ligand charge transfer (MLCT/LLCT).