In situ crystallization of ZnAl2O4/ZnO nanocomposite on alumina granule for photocatalytic purification of wastewater

Research on Chemical Intermediates - ZnAl2O4/ZnO nanocomposites with different ZnO (20, 30, and 40 mol%) concentrations and coated samples on supports were successfully prepared through...     

Effective removal of 4-Aminophenol from aqueous environment by pea (Pisum sativum) shells activated with sulfuric acid: Characterization,isotherm, kinetics and thermodynamics

The threat of phenol contamination in aquatic ecosystems is significant for the health of the earth's water systems as well as all humans on it. The present study was conducted to synthesize a cost-effective adsorbent (pea shells activated with sulfuric acid, PSASA) from agriculture waste (pea shells) and its use for effective removal of toxic 4-Aminophenol (4-AP). Newly designed PSASA exhibited significant adsorption of 4-AP which was confirmed by SEM, FT-IR, and XRD analysis. Surface topography confirmed high unevenness of the PSASA surface and the macroporous feature of the PSASA was confirmed by BET analysis. . Multiple testing was done to see how various factors affected adsorption such as adsorbent dose, temperature, pH, PZC, the effect of KCl and urea addition and the effect of the initial concentration of 4-AP. A drop in adsorption uptake of 4-AP was observed as the temperature increases from 25 °C to 45 °C. Maximum adsorption uptake (q_m) was found to be 106.11 mg/g at an optimum pH of 7.0 and 25 °C. Among various adsorption isotherm models tested, Langmuir Isotherm gave the best explanation with high R² values of experimental data. The pseudo-first-order model was found to explain the kinetics of adsorption well. The thermodynamic finding confirms the adsorption process was physical and exothermic. The adsorption of 4-AP was primarily governed by electrostatic interaction, hydrogen-bonding and π-π exchange mechanism. Because of the positive outcomes of the present research, we can use the PSASA as a cost-effective adsorbent for removing phenolic compounds.     

Preparation and characterization of nano-Co-[4-chlorophenyl-salicylaldimine-methyl pyranopyrazole]Cl2 as a new Schiff base complex and catalyst for the solvent-free synthesis of 1-amidoalkyl-2-naphthols

By the reaction of 4-chlorobenzaldehyde with ethyl acetoacetate, malononitrile, and hydrazine hydrate, 6-amino-4-(4-chlorophenyl)-3-methyl-2,4-dihydropyrano[2,3-c]pyrazole-5-carbonitrile was prepared and then reacted with salicylaldehyde and CoCl₂·6H₂O to produce nano-Co-[4-cholorophenyl-salicylaldimine-methylpyranopyrazole]Cl₂ (nano-[Co-4CSMP]Cl₂). The prepared nano-Schiff base complex was reported for the first time and fully characterized by Fourier transform-infrared spectroscopy, thermal gravimetric analysis, differential thermal gravimetric analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and Brunner–Emmett–Teller analyses and applied as an efficient catalyst for the synthesis of some 1-amidoalkyl-2-naphthol derivatives.     

The Different Effects of Metal Ions on the Synthesis of Macroacyclic Compounds: X-ray Crystal Structure,Theoretical Studies,Antibacterial and Antifungal Activities

Russian Journal of Coordination Chemistry - In this work, we have been involved studying the synthesis of some new macroacyclic complexes I–VIII, so we tried to get propoesed results...     

A Modified Peng–Robinson Equation of State for Heavy Hydrocarbons

Russian Journal of Physical Chemistry A - A new simple and accurate functional form for an attractive parameter α is introduced for Peng–Robinson equation of state. The modified...     

Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

Comparative analysis of refrigerant performance between LPG and R134a under subtropical climate

Journal of Thermal Analysis and Calorimetry - In this investigation, a series of experiments were conducted to explore the effects of liquefied petroleum gas (LPG) mixture of 60% propane and 40%...     

Ammonium chloride-catalyzed green multicomponent synthesis of dihydropyrazine and tetrahydrodiazepine derivatives “on water”

Molecular Diversity - This research describes a simple and efficient one-pot synthetic approach for the preparation of tetrahydrodiazepine and dihydropyrazine (or dihydroquinoxaline) derivatives in...     

Study of Pion Transverse Momentum Distributions in Ultra-Relativistic Heavy Ion Collisions: A USTFM Approach

Journal of Experimental and Theoretical Physics - The mid-rapidity (|y| < 0.5) transverse momentum distributions of identified charged pions produced in different collision systems at...     

Effect of ion velocity on SHI-induced mixing in Ti/Bi system

Energetic ion beams are proving to be versatile tools for modification and depth profiling of materials. The energy and ion species are the deciding factor in the ion-beam-induced materials modification. Among the various parameters such as electronic energy loss, fluence and heat of mixing, velocity of the ions used for irradiation plays an important role in mixing at the interface. The present study is carried out to find the effect of the velocity of swift heavy ions on interface mixing of a Ti/Bi bilayer system. Ti/Bi/C was deposited on Si substrate at room temperature by an electron gun in a high-vacuum deposition system. Carbon layer is deposited on top to avoid oxidation of the samples. Eighty mega electron volts Au ions and 100?MeV Ag ions with same value of S_e for Ti are used for the irradiation of samples at the fluences 1?×?10¹³–1?×?10¹⁴ ions/cm². Different techniques like Rutherford backscattering spectroscopy, atomic force microscopy and grazing incidence X-ray diffraction were used to characterize the pristine and irradiated samples. The mixing effect is explained in the framework of the thermal spike model. It has been found that the mixing rate is higher for low-velocity Au ions in comparison to high-velocity Ag ions. The result could be explained as due to less energy deposition in thermal spike by high-velocity ions.