Spectroscopy of the regenerative soot

The mechanisms and processes of the formation of the regenerative soot in a graphite hollow cathode discharge that produces and emits carbon clusters are presented. Mass spectrometry with a specially designed E×B velocity filter analyzes the entire range of the charged clusters from C ₁ to ∼C ₄₃₀₀. The state of the carbon vapour within the source is evaluated by using the characteristic line emissions from the carbonaceous discharge whose formative mechanisms depend upon the kinetic and potential sputtering of the sooted cathode. The carbonaceous discharge generates atomic and ionic C and its clusters C _m (m≥ 2), noble gas metastable atoms and ions, energetic electrons and photons in the cavity of the graphite hollow cathode. The parameters of soot formation and its recycling depend critically on the discharge parameters, the geometry of the hollow cathode and 3D profile of the cusp magnetic field contours. Received 2nd July 2001 and Received in final form 10 September 2001     

Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

Phase Transitions in the Early Universe with Negatively Induced Supergravity Cosmological Constant

We consider that the observable cosmological constant is the sum of the vacuum （Avac） and the induced term （Aind - 3m^2/4） with m being the ultra-llght masses （≈ Hubble parameter） implemented in the theory from supergravities arguments and non-minimal coupling. In the absence of a scalar buildup of matter fields, we study its effects on spontaneous symmetry breaking with a Higgs potential and show how the presence of the ultra-light masses yields some important consequences for the early universe and new constraints on the Higgs and electroweak gauge bosons masses.     

Observation and analysis ofE mesons in\bar p p annihilation at rest in H2 gas

Antiproton-proton annihilation at rest in a gaseous H₂ target at NTP into the final state π⁺ π^? K ^± π^? (K ⁰) with an undetectedK ⁰ or \(\bar K^0 \) has been investigated. We observe theE(1420) resonance in the invariant mass spectrum (K ⁰)_miss K ^± π^? with massM _E =1413±8 MeV/c² and widthГ ^E =62 ± 16MeV/c² and find evidence for the production of thef ₁(1285). The absolute branching ratio of \(\bar p\) p → π⁺ π^? E ⁰,E ⁰ →K ₀ ^L K ^± π ^? at (61±6)%P wave annihilation is (3.0±0.9)·10^?4 of all annihilations. The observed suppression of theE production fromP wave with respect to theS wave together with some simple selection rules suggest that the quantum numbers of theE(1420) areJ ^pc=0^?+ and not I⁺⁺.     

Trace element concentration in head hair of the inhabitans of the Rawalpindi-Islamabad area

Instrumental neutron activation analysis technique has been used to determine the concentration levels of 12 trace elements in human head hair samples collected from 105 individuals living in various areas of Rawalpindi-Islamabad. The data show that the average concentrations of Mn, Co, Ag and Au are higher in the female group as compared to the male group. Four individuals were found to have elevated levels of Se due to the use of anti-dandruff shampoos, whereas two individials had elevated levels of Hg.     

Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.     

Development of an optical fibre Al(III) sensor based on immobilised chrome azurol S

Chrome azurol S immobilised on XAD-2 has been used in this study as a reagent phase for the development of an optical fibre Al(III) sensor. Using a kinetic approach, this sensor was able to give a linear response in the Al(III) concentration range of 1.3 x 10(-5)-2.0 x 10(-4) M with a limit of detection of 1.0 x 10(-4) M. The optimum responses were obtained at pH 6.0 and when the solution was stirred. The sensor response was found to have a repeatability and reproducibility of 1.6% and 5.8%, respectively. The results obtained for Al(III) determination in aqueous sample were in good agreement with those obtained using graphite furnace-atomic absorption spectrometry.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

Negative ion FAB mass spectroscopy of some ribose alkylated 5'-UMP derivatives

Characteristic fragment ions obtained in Fast atom bombardment (FAB) mass spectroscopy of ribose alkylated Uridine 5'-monophosphate (5'-UMP) derivatives in negative ion mode are described. All the compounds examined exhibited either [M]- or quasimolecular ion [M - H]- the fragmentations can be used to characterize these nucleotides.