Radiochemical analysis of toxic elements in biological materials

A radiochemical method for simultaneous determination of toxic elements (Hg, Cd and Sb) in biological materials has been developed. The procedure involves the irradiation of samples with thermal neutrons and quantitative one-step separation in 0.1M 4-(5-nonyl)pyridine/benzene from 2.0M hydrochloric acid followed by gamma-ray spectrometry. The procedure is applied for the analysis and to the studies of distribution of these elements in IAEA-RMs, human serum and hair samples. Results obtained are found to be in good agreement with those reported in the literature.     

Activity concentrations of 210Po in the soft parts of cockle (Anadara granosa)at Kuala Selangor, Malaysia

Polonium-210 has been measured in the soft parts of Anadara granosa purchased at Kuala Selangor, West Coast of Malaysia in August 2001, April 2002 and September 2002. It is shown that ²¹⁰Po is non-uniformly distributed within cockles of various sizes (i.e., 2.5, 3.0, 3.5 and 4.0 cm of shell length) and the concentration of ²¹⁰Po in the soft parts of cockle was significantly different (p<0.05) due to sampling date. The highest value was observed in the smallest cockle with a shell length of 2.5 cm (411.6±26.16 Bq/g dry wt.). It is clear that there is an allometric relationship between ²¹⁰Po activity concentration and individual cockle weight. This may reflect on the differences of metabolic rate and growth age of cockles. The mean activity concentration of ²¹⁰Po measured in Kuala Selangor filtered water were 1.75±0.17, 0.79±0.08 and 1.13±0.20 Bq/kg for August 2001, April 2002 and September 2002, respectively. The yield concentration factors for ²¹⁰Po in the soft parts of cockles varies from 27.3^. 10³ to 106.9^. 10³. This revised version was published online in July 2006 with corrections to the Cover Date.     

Organoaluminum–cyclic ether-cyclic imide catalysts for the polymerization of epoxides

A catalyst for the polymerization of epoxides consisting of trialkylaluminums, cyclic ethers, and cyclic imides has been investigated. Various catalyst components were examined to reveal that the combination of triisobutylaluminum, dioxane, and succinimide gives the most active catalyst. The catalytic activity is greatly enhanced with aging in which the change in color from pale yellow to dark red takes place. The polymerization data show that the dioxane provides a pathway for the catalyst components to form an active species. The dioxane-containing catalyst is likely to be different in structure from that of the dioxane-free catalyst. It was shown that the catalyst solution is electrically conductive. A parallel correlation seems to exist between the electrical conductivity and the catalytic activity, suggesting that the catalytic species may be of an ionic character.     

Synthesis of 5-Substituted 1,3-Dimethylpyrazolo[4,3-<Emphasis Type="Italic">e</Emphasis>][1,2,4]triazines

Summary.  A novel method for the synthesis of a new series of 5-substituted 1,3-dimethyl pyrazolo[4,3-e][1,2,4]triazines is described. The new synthetic strategy is based on the classical Bischler 1,2,4-benzotriazine synthesis. This approach involves the preparation of 5-hydrazinopyrazole from 5-chloro-1,3-dimethyl-4-nitropyrazole followed by acylation and nitro group reduction to form the corresponding 4-amino-3-(acylhydrazino)pyrazoles. Intramolecular oxidative cyclization of the latter derivatives, using polyphosphoric acid, produced the respective target pyrazolotriazines.     

Synthesis of 5-Substituted 1,3-Dimethylpyrazolo[4,3-e][1,2,4]triazines

A novel method for the synthesis of a new series of 5-substituted 1,3-dimethyl pyrazolo[4,3-e][1,2,4]triazines is described. The new synthetic strategy is based on the classical Bischler 1,2,4-benzotriazine synthesis. This approach involves the preparation of 5-hydrazinopyrazole from 5-chloro-1,3-dimethyl-4-nitropyrazole followed by acylation and nitro group reduction to form the corresponding 4-amino-3-(acylhydrazino)pyrazoles. Intramolecular oxidative cyclization of the latter derivatives, using polyphosphoric acid, produced the respective target pyrazolotriazines.     

Isotope shift studies in the spectra of Gadolinium in UV region and term shifts of high even levels of Gd I

Isotope shift Δσ(¹⁵⁶Gd?¹⁶⁰Gd) is reported in 70 spectral lines of neutral gadolinium atom (Gd I) in the 3290- 3920 Å region providing isotope shift data in UV lines of Gd I spectrum for the first time. The measurements were carried out on a photoelectric recording Fabry-Perot Spectrometer using highly enriched isotopic samples of gadolinium. Term isotope shifts ΔT(¹⁵⁶Gd?¹⁶⁰Gd) have been evaluated for 48 high lying even parity energy levels of Gd I using this data; new ΔT values have been obtained for 24 levels. Electronic configurations 4f⁷5d6s6p, 4ff⁷5df²6p and 4f⁸5d6s assigned earlier to these even levels have been either confirmed or configuration mixing pointed out in some of these levels. Probable assignment of 4f⁸5d6s configuration to 8 even levels between 32 930 and 35 500 cm^-1 have been confirmed.     

(Eta5-pentamethylcyclopentadienyl)rhodium and -iridium complexes with weakly and strongly coordinating anions: isolation and first X-ray molecular structures of the tris(solvent) complexes [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir)

Several novel pentamethylcyclopentadienyl complexes of general formula [(C5Me5)IrL3][BF4]2 were prepared including the tris(solvent) precursors [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir) (1a,b). The X-ray molecular structures of 1a,b were determined at low temperature. Complexes 1a,b are isostructural, and both compounds crystallize in the monoclinic space group P2(1)/c with a = 10.157(3) A, b = 14.038(9) A, c = 16.335(2) A, beta = 99.73(2) degrees, and Z = 4 for 1a and with a = 10.107(9) A, b = 13.994(16) A, c = 15.996(34) A, beta = 99.61(12) degrees, and Z = 4 for 1b. The coordinated water molecule is hydrogen bonded to both BF4(-) anions. Reaction of 1a,b with pyridine (py) afforded the related tris(pyridine) complexes [(C5Me5)M(eta1-(N)-py)3][BF4]2 (M = Rh, Ir) (2a,b). Complex 2b was characterized by X-ray crystallography, monoclinic space group P2(1)/c with a = 8.665(3) A, b = 19.687(7) A, c = 18.408(5) A, beta = 94.17(3) degrees, and Z = 4. Moreover, we prepared the novel neutral compounds (C5Me5)M(eta2-NO3)(eta1-NO3) (M = Rh, Ir) (4a,b) where the anions are bonded to the metal center instead of a coordinating solvent as confirmed by X-ray study on the iridium complex 4b. The latter crystallizes in the orthorhombic space group Pcab with a = 13.032(4) A, b = 14.370(11) A, c = 14.839(18) A, and Z = 8.     

Characteristic absolute efficiency response curves of a high purity germanium detector in the energy range 50–1500 keV

The characteristic absolute efficiency response curves of a high purity germanium detector (HPGe) for different counting geometries have been established in the energy range 50–1500 keV by measuring the absolute efficiencies using both mono-energetic and multi-gamma emitting radionuclide point calibrated sources supplied by IAEA. Several fitting functions proposed in the literature were assessed for interpolation within the intermediate energy range of interest. The values of the function parameters have been determined by using the linear least square methods. The problems associated with the measurements of experimental efficiency data at small source–detector distances and the importance of the correlation matrix in the estimation of precise uncertainties have been shown. It was found that the inclusion of correlation matrices in the propagation of error formulae plays a significant role up to 450 keV gamma-ray energy and results in a drastic reduction of errors associated with the predicted efficiencies. The discrepancy at closer counting geometries in the absence of true gamma-gamma coincidence corrections is found to reach to about 30%.     

Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA)

Benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) is introduced as a monomer for the synthesis of a series of novel polyimides with enhanced high thermal stability. Polyimides derived from BBTDA and aromatic diamines showed high glass transition (T_g>296 °C) and degradation (T₅>455 °C) temperatures, and were soluble in organic solvents (i.e. N-methyl pyrrolidone (NMP), N,N^′-dimethylformamide (DMF), N,N^′-dimethylacetamide (DMAc)). The polymerization yielded high-molecular-weight polyimides with inherent viscosities ranging from 1.75 to 2.14 dl/g. The polymers were characterized by IR and elemental analysis.     

Spectrophotometric determination ofo- andp-phenylenediamines

Summary Cupric chloride-triphenylphosphine complex gives red color witho-phenylenediamine having maximum absorption at 505–520 nm and 0.5g/ml as visual limit of identification. The reaction is specific foro-phenylenediamine and obeys Beer's law (1 to 10g/ml). This reaction provides the basis of a new method for the Spectrophotometric determination ofo-phenylenediamine ing quantities.Ruthenium trichloride-triphenylphosphine complex gives blue color withp-phenylenediamine having maximum absorption at 580 nm and 2g/ml as visual limit of identification. On the basis of this color reaction a Spectrophotometric method for the determination ofp-phenylenediamine in hair dyes is described. The recovery of the dye from commercial preparations is better than 97%. Other organic compounds do not interfere.

---

Zusammenfassung Kupfer(II)chlorid-triphenylphosphin reagiert mito-Phenylendiamin unter Rotfärbung mit maximaler Absorption bei 505 bis 520 nm und 0,5g/ml als Erfassungsgrenze. Die Reaktion ist für o-Phenylendiamin spezifisch und folgt dem Beerschen Gesetz zwischen 1 und 10g/ml. Sie dient als Grundlage für eine neue Methode der spektrophotometrischen Bestimmung von Mikrogrammengen o-Phenylendiamin.Rutheniumtrichlorid-triphenylphosphin reagiert mit p-Phenylendiamin unter Blaufärbung mit maximaler Absorption bei 580 nm und 2g/ml als Erfassungsgrenze. Auf dieser Grundlage läßt sich p-Phenylendiamin in Haarfärbemitteln bestimmen. In handelsüblichen Präparaten werden mehr als 97% des enthaltenen Farbstoffes gefunden. Andere Verbindungen stören nicht.