Current-driven electron drift solitons

The soliton formation by the current-driven drift-like wave is investigated for heavier ion (such as barium) plasma experiments planned to be performed in future. It is pointed out that the sheared flow of electrons can give rise to short scale solitary structures in the presence of stationary heavier ions. The nonlinearity appears due to convective term in the parallel equation of motion and not because of temperature gradient unlike the case of low frequency usual drift wave soliton. This higher frequency drift-like wave requires sheared flow of electrons and not the density gradient to exist.     

Interacting generalized ghost dark energy in a non-flat universe

We investigate the generalized Quantum Chromodynamics (QCD) ghost model of dark energy in the framework of Einstein gravity. First, we study the non-interacting generalized ghost dark energy in a flat Friedmann-Robertson-Walker (FRW) background. We obtain the equation of state parameter, w _D = p/ρ, the deceleration parameter, and the evolution equation of the generalized ghost dark energy. We find that, in this case, w _D cannot cross the phantom line (w _D > ?1) and eventually the universe approaches a de-Sitter phase of expansion (w _D → ?1). Then, we extend the study to the interacting ghost dark energy in both a flat and non-flat FRW universe. We find that the equation of state parameter of the interacting generalized ghost dark energy can cross the phantom line (w _D < ?1) provided the parameters of the model are chosen suitably. Finally, we constrain the model parameters by using the Markov Chain Monte Carlo (MCMC) method and a combined dataset of SNIa, CMB, BAO and X-ray gas mass fraction.     

Switchable Q-switched and laser operating mode-locked erbium-doped fiber in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser （EDFL） operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 #s, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least l0 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

Preparation,surface state and band structure studies of SrTi(1 − x)Fe(x)O(3 − δ) (x = 0–1) perovskite-type nano structure by X-ray and ultraviolet photoelectron spectroscopy

In this report, SrTi_(1 ? x)Fe_(x)O_(3 ? δ) photocatalyst powder was synthesized by a high temperature solid state reaction method. The morphology, crystalline structures of obtained samples, was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscopy (TEM), respectively. The electronic properties and local structure of the perovskite STF_x (0 ≤ x ≤ 1) systems have been probed by extended X-ray absorption fine structure (EXAFS) spectroscopy. The effects of iron doping level x (x = 0–1) on the crystal structure and chemical state of the STF_x have been investigated by X-ray photoelectron spectroscopy and the valence band edges for electronic band gaps were obtained for STF_x by ultraviolet photoelectron spectroscopy (UPS). A single cubic perovskite phase of STF_x oxide was successfully obtained at 1200 °C for 24 h by the solid state reaction method. The XPS results showed that the iron present in the STF_x perovskite structure is composed of a mixture of Fe³⁺ and Fe⁴⁺ (SrTi_(1 ? x)[Fe³⁺, Fe⁴⁺]_(x)O_(3 ? δ)). When the content x of iron doping was increased, the amount of Fe³⁺ and Fe⁴⁺ increased significantly and the oxygen lattice decreased on the surface of STF_x oxide. The UPS data has confirmed that with more substitution of iron, the position of the valence band decreased.     

Composite polymeric electrolytes based on PMMA-LiCF3SO3-SiO2

Preliminary results on the mechanical, optical and electrical properties of composite gel electrolytes (CGEs) with fumed silica (SiO₂) as a filler added to gel polymeric electrolyte (GPE) based on PMMA, LiCF₃SO₃ and PC are presented in this paper. Added fumed silica is seen to enhance the mechanical properties of the GPE without changing the conductivity significantly. The high ionic conductivity (×10⁻³ S/cm), high transmission in the visible region and nominal variance of conductivity and viscosity over a wide temperature window show that these CGEs are potential electrolytes for electrochromic windows (ECWs).     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Study of spontaneous fission with EUROGAM

Prompt γ radiation following spontaneous fission has been measured using the EUROGAM 2 array. Using these data and newly developed analysis techniques a number of subjects were studied, which are briefly discussed. One of these subjects, shape transition in A≈100 Sr and Zr nuclei is discussed in more detail. Quadrupole moments were determined for rotational bands in the N=58,59,60,62 and 64 Sr and Zr isotopes. Deformation parameters, which increase from β₂ ≈ 0.1 at N=56 to β₂ ≈ 0.4 at N=64, suggest that in strontium and zirconium isotopes shape change happens gradually between N=56 and N=62 and is probably due to an occupancy of three or more deformation-driving orbitals of h_11/2 parentage.     

Effects of plasticiser on the lithium ionic conductivity of polymer electrolyte PVC-LiCF3SO3

Solid polymer electrolyte films based on poly(vinyl chloride)-lithium triflate (PVC-LiCF₃SO₃) have been prepared by the solution-cast technique in various concentrations. The film with the highest conductivity was used to prepare plasticised polymer electrolyte films by using poly(ethlene glycol) (PEG) of different molecular weights, i.e., 200, 400 and 600 gmol⁻¹. These films were prepared to study the effects of addition of low molecular weights PEG on the lithium ionic conduction of the PVC based polymer electrolyte. The films were characterised by electrochemical impedance spectroscopy (EIS) and Fourier transform infrared-spectroscopy (FTIR). Results indicate that the molecular weight has an inverse effect on the conductivity and this has been accounted for by FTIR. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Energy limits imposed by two-photon absorption for pulse amplification in high-power semiconductor optical amplifiers

We study the combined effects of dynamic gain saturation and two-photon absorption on the amplification of short pulses in semiconductor optical amplifiers and show that two-photon absorption can saturate the amplifier gain and limit the output pulse energies even for amplifiers with large gain saturation energies. We discuss the upper limits for the pulse energies obtainable from semiconductor optical amplifiers in the presence of two-photon absorption and show that for single transverse mode waveguide amplifiers these upper limits can range from values as small as a few picojoules to several hundred picojoules for pulse widths in the 0.5 ps to 20 ps range, respectively.