Effect of heat treatment on the structure and morphology of ZnO nanorod array and its composite with titania precursor

ABSTRACT

Effects of the elevated temperature on the structure evolution of the ZnO nanorod array (ZNA) and their hybrid nanocomposite with layered (tetramethyl)ammonium titanate (LTMAT) prepared by the liquid phase deposition were investigated. The vertically oriented ZnO nanorods were deposited on a quartz plate by a chemical bath deposition method and then they were penetrated by the LTMAT using the dip-coating method from the water solution. As a result of such an experimental procedure, an assembly composed of the ZNA with LTMAT was obtained and called hybrid nanocomposite. Since the LTMAT converts to TiO₂ upon subsequent sintering at 350 °C, it can be regarded as TiO₂ precursor for the thermal treatment experiments. The experiments with ZNA and their hybrid nanocomposite at the elevated temperature revealed coalescence of the deposited ZnO nanorods and crystallization of zinc titanate with Zn₂TiO₄ stoichiometry.     

Uniqueness of minimal Fourier-type extensions in L_1-spaces

We give a characterization of uniqueness of finite rank Fourier-type minimal extensions in $L_1$ -norm. This generalizes the main result obtained by Lewicki (Proceedings of the Fifth International Conference on Function Spaces, Lecture Notes in Pure and Applied Mathematics, vol. 213, pp. 337–345, 1998) to the case of $n$ -circular sets in $\mathbb{C }^n$ .     

Characterization of an all Sol-Gel Electrochromic Device WO3/Ormolyte/CeO2-TiO2

Electrochemical lithium intercalation in thin films of CeO₂-TiO₂ and WO₃, prepared by the sol-gel technique was investigated with cyclic voltammetry and spectroelectrochemical techniques in propylene carbonate solutions. A solid state system having the configuration WO₃/Ormolyte/CeO₂-TiO₂ has been assembled. The solid electrolyte, an organically modified electrolyte (ormolyte), was prepared with different [O]/[Li] ratios. The transmittance variation of this system during a potentiostatic step from –0.7 V to 0.8 V was about 35% at 550 nm.     

Monitoring of NO2 in the ambient air with passive samplers before and after a road reconstruction event

Nitrogen dioxide (NO₂) concentrations were used to evaluate the air quality before and after the infrastructural change of an important traffic artery in Mortsel, Antwerp (Belgium). During the reconstruction works two pairs of traffic lanes were reduced to one in each direction. Two sampling campaigns were conducted: the first one before the works in 2003 and the second one in 2005, after the road works were finished. Sampling was performed on a weekly base with the use of passive diffusion tubes on the streets, and also indoors in nearby houses. The samples were analyzed by ion chromatography, from which data the NO₂ concentrations in air could be calculated. These results were compared with NO₂ values from the air monitoring station 42R801 of the Flemish Environment Agency in Borgerhout, Antwerp. On the base of different NO₂ concentrations, correlated well with the traffic density, sampling locations were classified into three groups as follows: 1) ‘heavily polluted’ (heavy traffic); 2) ‘moderately polluted’ (medium traffic); or 3) ‘less polluted’ (low traffic density). Sampling sites located further from the road works, enclosed to the group ‘less polluted’, showed the lowest NO₂ concentrations. The highest NO₂ level was found for the locations close to reconstruction works, which belonged to the group ‘heavily polluted’. The contribution of NO₂ was at the same level before and after the road works. During the first campaign it ranged from 30 ± 7 µg/m³ to 71 ± 11 µg/m³ and during the second sampling it was between 36 ± 17 µg/m³ and 73 ± 17 µg/m³. These modernization works had no impact on preventing the traffic-related pollutant as NO₂ and as a consequence no significant effect on the air quality in the studied region. It has been proven that the impact of traffic on the air quality is unmistakably high and simply reduction of the number of the traffic lanes, intended to discourage the traffic flow, had apparently no environmentally advantageous effect.     

Two isomorphous ZnII/CoII complexes with tri‐tert‐butoxysilanethiol and histamine,and (4‐hydroxymethyl‐1H‐imidazole‐κN)bis(tri‐tert‐butoxysilanethiolato‐κ2O,S)zinc(II)

The complexes [2‐(1H‐imidazol‐4‐yl‐κN³)ethylamine‐κN]bis(tri‐tert‐butoxysilanethiolato‐κS)cobalt(II), [Co(C₁₂H₂₇O₃SSi)₂(C₅H₉N₃)], and [2‐(1H‐imidazol‐4‐yl‐κN³)ethylamine‐κN]bis(tri‐tert‐butoxysilanethiolato‐κS)zinc(II), [Zn(C₁₂H₂₇O₃SSi)₂(C₅H₉N₃)], are isomorphous. The central Zn^II/Co^II ions are surrounded by two S atoms from the tri‐tert‐butoxysilanethiolate ligand and by two N atoms from the chelating histamine ligand in a distorted tetrahedral geometry, with two intramolecular N—H...O hydrogen‐bonding interactions between the histamine NH₂ groups and tert‐butoxy O atoms. Molecules of the complexes are joined into dimers via two intermolecular bifurcated N—H...(S,O) hydrogen bonds. The Zn^II atom in [(1H‐imidazol‐4‐yl‐κN³)methanol]bis(tri‐tert‐butoxysilanethiolato‐κ²O,S)zinc(II), [Zn(C₁₂H₂₇O₃SSi)₂(C₄H₆N₂O)], is five‐coordinated by two O and two S atoms from the O,S‐chelating silanethiolate ligand and by one N atom from (1H‐imidazol‐4‐yl)methanol; the hydroxy group forms an intramolecular hydrogen bond with sulfur. Molecules of this complex pack as zigzag chains linked by N—H...O hydrogen bonds. These structures provide reference details for cysteine‐ and histidine‐ligated metal centers in proteins.     

Unusual photochemical C-N bond cleavage in the novel methyl 2-chloro-3-methyl-2H-azirine-2-carboxylate

The structure, preferred conformers, vibrational spectrum, and photochemical behavior of the novel azirine, methyl 2-chloro-3-methyl-2H-azirine-2-carboxylate (MCMAC) were investigated in low-temperature matrixes and in the neat solid amorphous state by infrared spectroscopy and quantum-chemical calculations. Two conformers of the compound were observed in argon, krypton, and xenon matrixes, in agreement with the DFT(B3LYP)/6-311++G(d,p) and MP2/6-311++G(d,p) theoretical calculations. Both conformers were found to exhibit the carboxylic ester group in the cis conformation, differing in the arrangement defined by the O=C-C-Cl dihedral angle (cis and trans, for Ct and Cc forms, respectively). The Ct conformer was found to be the most stable conformer in the gaseous phase as well as in both argon and krypton matrixes, whereas the more polar Cc conformer became the most stable form in the xenon matrix and in the neat solid amorphous phase. In situ broadband UV (lambda > 235 nm) excitation of matrix-isolated MCMAC led to azirine ring C-C and C-N bond cleavages, the latter process corresponding to the most efficient reaction channel. The photochemical cleavage of the C-N bond had never been previously observed in the case of aliphatic 2H-azirines. Two electron withdrawing substituents (methoxycarbonyl group and chlorine atom) are connected to the azirine ring in the novel MCMAC azirine. The simultaneous presence of these two groups accelerates intersystem crossing toward the triplet state where cleavage of the C-N bond takes place. The primary photoproducts resulting from the C-N and C-C ring-opening reactions were also found to undergo further photochemical decarbonylation or decarboxylation reactions.     

Synthesis of β-ketophosphonates with electron rich β-aryl groups as useful organophosphorus reagents in lignans synthesis

Investigation of the oxidation reaction of electron rich alkoxy substituted β-aryl β-hydroxyphosphonates to corresponding β-ketophosphonates, which may be utilized in syntheses of lignans with various oxidizing agents (PCC, PDC, SIBX, CAN, Oxone^®, KMNO₄/SiO₂, KMnO₄/MS 4 Å, KMnO₄/CuSO₄, KMnO₄/CuSO₄/Al₂O₃, MnO₂, CrO₃/SiO₂, H₂O₂/salen) is described. The effect of oxidants and reaction conditions on the reaction efficiency and yield was also investigated.     

H/D isotopic recognition in hydrogen bonded systems: H/D isotopic self-organization effects in the IR spectra of the hydrogen bond in 2-methylimidazole crystals

Polarized IR spectra of H12(3)45 2-methylimidazole and of its H1D2(3)45, D1H2(3)45 and D12(3)45 deuterium derivative crystals are reported and interpreted within the limits of the "strong-coupling" theory. The spectra interpretation facilitated the recognition of the H/D isotopic "self-organization" phenomenon, which depends on a non-random distribution of protons and deuterons in the lattices of isotopically diluted crystal samples. The H/D isotopic "self-organization" mechanism engaged all four hydrogen bonds from each unit cell. These effects basically resulted from the dynamical co-operative interactions involving adjacent hydrogen bonds in each hydrogen bond chain. A weaker exciton coupling involved the closely spaced hydrogen bonds; each belonging to a different chain of associated 2-methylimidazole molecules. The high intensity of the narrow band at ca. 1880cm(-1) was interpreted as the result of coupling between the γ(N-H?N) proton bending "out of plane" vibration overtone and the ν(N-H) proton stretching vibration.     

Nucleoside-metallacarborane conjugates for base-specific metal labeling of DNA

A general approach to the synthesis of nucleoside conjugates between derivatives of thymidine (T), 2'-O-deoxycytidine (dC), 2'-O-deoxyadenosine (dA), and 2'-O-deoxyguanosine (dG), and metallacarborane complexes is described. Metallacarborane-nucleoside derivatives are prepared by reaction of the dioxane-metallacarborane adduct with a base-activated 3',5'-protected nucleoside. In the case of T and dG a mixture of regioisomers, which is easily separable by chromatographic methods, is obtained, thus yielding a series of modifications containing metallacarborane groups at the 2-O, 3-N, 4-O and 1-N, 2-N, 6-O locations, respectively; dC and dA are alkylated at the exo-amino function. The proposed methodology provides a route for the synthesis and study of nucleic acids modified with metallacarboranes at designated locations and a versatile approach to the incorporation of metals into DNA.     

A novel catalytic adsorptive stripping voltammetric method for the determination of germanium ultratraces in the presence of chloranilic acid and the V(IV)·HEDTA complex

A novel, sensitive catalytic adsorptive stripping voltammetric procedure which can be used to determine trace amounts of germanium is described. The method is based on the interfacial accumulation of the complex formed by Ge(IV) and the product of the reduction of chloranilic acid on the hanging mercury drop electrode or the renewable silver amalgam film electrode, and its subsequent reduction from the adsorbed state followed by the catalytic action of the V(IV)·HEDTA complex. The presence of V(IV)·HEDTA greatly enhances the adsorptive stripping response of Ge. The reduction of the Ge(IV) in the presence of chloranilic acid and V(IV)·HEDTA was investigated in detail and the effects of pH, electrolyte composition, and instrumental parameters were studied. Under optimal conditions, the catalytic peak current of germanium exhibited good linearity for Ge(IV) concentrations in the range of 0.75–60 nM (for 60 s of accumulation at −0.1 V, r² = 0.995) and a low limit of detection (LOD = 0.085 nM). The procedure was successfully applied to determine Ge in water samples.