Polyelectrolyte capsules made of two biocompatible natural polymers

In this study the influence of the experimental conditions on the obtention of polyelectrolyte multilayer capsules was investigated. Two ways of the simple coacervation method was used to obtain spherical capsules involving chitosan and hyaluronan, chitosan being inside the particle covered by a hyaluronan layer to increase the biocompatibility. The ¹H-NMR spectroscopy confirmed a polyelectrolyte complex formation and the optical microscopy shows that the complexed capsules have good sphericity with average diameters ranging from 590 at 1550 μm in the experimental conditions adopted. One can observe that in the acid medium the complexed capsules are much stable than the chitosan beads. The structures described provide a starting point for the design and fabrication of complexed capsules made of two biocompatible natural polymers with potential applicability in medical or pharmaceutical applications. Few diffusion experiments demonstrated that the complexed layer controls the diffusion of dextran included in the chitosan inner domain.     

Preparation and characterization of chelating resins loaded with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol for preconcentration of rare earth elements

 Chelating resins prepared by sorption of 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol (5-BrPADAP) on macroporous resins (Amberlite XAD-4 and XAD-7) were characterized. The adsorption properties (amount of chelating agent adsorbed per gram of resin, sorption kinetics, retention capacity, etc.) and the thermodynamic quantities of each adsorption process were determined. The retention of some rare earth elements (e.g. Er, Yb and Lu) on these chelating resins was studied in order to preconcentrate them for their determination by X-Ray fluorescence spectrometry. Received: 7 September 1995/Revised: 2 January 1996/Accepted: 10 January 1996     

Isomerisation of ω-hydroxyalkenes under hydroxycarbonylation conditions in palladium catalysed aqueous phase systems

The ω-hydroxyolefins 3-buten-1-ol, 3-buten-1-methyl-1-ol and 4-penten-1-ol were subjected to hydroxycarbonylation conditions in water in the presence of PdCl₂(PhCN)₂ and 4-8 equiv. of water soluble tris(3-sodiumsulfonatophenyl)phosphine (TPPTS), or N-bis(N′,N′-diethyl-2-aminoethyl)-4-aminomethylphenyl-diphenylphosphine (N3P). Under conditions of high conversion, the olefins primarily undergo isomerisation through a chain walking mechanism with selectivities for aldehyde ranging from 65% to 98%, with the lower values for longer chain alcohols. The lactones formed as the minor product are almost exclusively branched, indicating that in the first step 2,1-insertion is strongly favoured over 1,2-insertion. In the N3P system also linear lactone is produced at lower conversion. Running the reaction in D₂O produces multiple deuterium incorporation in all positions of the carbon chain. A mechanism is discussed.     

Tertiary phosphine abstraction from a platinum(II) coordination complex with SeCN: Crystal and molecular structures of SePTA and [SePTA-Me]I · CH3OH

Reacting [PtCl(PTA)₃]Cl(PTA = 1,3,5-triaza-7-phosphatricyclo[3.3.1.1^3,7]decane) with KSeCN in aqueous or MeOH medium results in the abstraction of the PTA ligands to yield SePTA. The reaction also proceeds quantitatively by direct reaction of PTA and KSeCN in water or methanol. The methylated PTA ligand, [PTA-Me]I (1-methyl-1-azonia-3,5-diaza-7-phosphatricyclo[3.3.1.1^3,7]decane iodide), reacts accordingly with KSeCN, albeit significantly slower. The crystal structure of SePTA, 1, and [SePTA-Me]I · CH₃OH, 2, revealed PSe bond distances of 2.0991(19) and 2.100(2) Å, respectively. The first order phosphorous selenium coupling constants, ¹J_P-Se (D₂O), of 722 and 788 Hz for SePTA and [SePTA-Me]I, respectively, indicates the latter is significantly less electron rich.     

Mechanism of action of 4-hydroxymethyl-1,6,8-trimethylfuro[2,3-h]quinolin-2(1H)-one, a very active angular furocoumarin-like sensitizer

The molecular structure of 1,4,6,8-tetramethylfuro[2,3-h]quinolin-2(1H)-one (FQ), a recent furocoumarin-like photosensitizer, has been modified with the aim of reducing its strong genotoxicity, by replacing the methyl group at 4 position with a hydroxymethyl one, and so obtaining 4-hydroxymethyl-1,6,8-trimethylfuro[2,3-h]quinolin-2(1H)-one (HOFQ). This modification gave rise to a strong reduction of lipophilicity and dark interaction with DNA. The formation of monoadducts (MA) was deeply affected, whereas the induction of bifunctional adducts between DNA and proteins (DPC(L>0)) was replaced by an efficient production of DNA-protein cross-links at zero length (DPC(L=0)), probably via guanine damage. Because of its angular molecular structure, HOFQ does not form interstrand cross-links (ISC): therefore, DPC(L=0) and MA represent the main lesions induced by HOFQ in DNA. In comparison with FQ (which induces MA and DPC(L>0)) and 8-methoxypsoralen (8-MOP) (MA, ISC, DPC(L>0)), HOFQ seems to be a more selective agent. In fact, contrary to FQ and 8-MOP, HOFQ, together with a noticeable antiproliferative activity, shows low levels of point mutations in bacteria and of clastogenic effects in mammalian cells. HOFQ is also an efficient apoptosis inducer, especially in comparison with 8-MOP, when tested at equitoxic experimental conditions; this property might be correlated with the complete HOFQ inability of inducing skin erythemas, a well-known side effect of classic furocoumarin photosensitization.     

Bioaccumulation of thorium and uranyl ions on Saccharomyces cerevisiae

The efficiency of the yeast suspension ofSaccharomyces cerevisiae was studied in the decontamination of radioactive residual waste waters and in the biological behavior of the levuric mass. The effect of reaction time on the amino acid content in the supernatant and on the concentration of radioactive ions was also investigated. The reaction of yeast with the toxic agent showed that the living matter behaves differently from the chemical components of the cell. The yeast had the tendency to aggregate in the presence of radioactive ions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Multiple rate-determining steps for nonideal and fractal kinetics

We show that the kinetic model of a single rate-determining step in a reaction mechanism can be extended to systems with multiple overall reactions for which the elementary reactions obey nonideal or fractal kinetics. The following assumptions are necessary: (1) The system studied is either closed or open, but no constraints exist preventing the evolution toward equilibrium. (2) Elementary reactions occur in pairs of forward and backward steps. (3) The kinetics of the elementary steps are either nonideal or fractal and are compatible with equilibrium thermodynamics. (4) The number of reaction routes is identical with the number of rate-determining steps. If these hypotheses are valid, then the overall reaction rates can be explicitly evaluated: they have a form similar to the kinetic equations for the elementary reactions and the apparent reaction orders and fractal coefficients can be expressed analytically in terms of the kinetic parameters of the elementary reactions. We derive a set of relationships which connect the equilibrium constants of the reaction routes, the corresponding overall rate coefficients, and the stoichiometric numbers of the rate-determining steps. We also derive a set of generalized Boreskov relations among the apparent activation energies of the forward and backward overall processes, the corresponding reaction enthalpies, and the stoichiometric coefficients of the rate-determining steps. If the elementary reactions obey fractal kinetics, the same is true for the rate-determining steps. The fractal exponents of the forward and backward overall reactions are linear combinations of the fractal exponents of the fractal elementary reactions. Similar to the theory of single rate-determining steps, our approach can be used for selecting suitable reaction mechanisms from experimental data.     

The role of the Zn(II) binding domain in the mechanism of E. coli DNA topoisomerase I

Background  

Escherichia coli DNA topoisomerase I binds three Zn(II) with three tetracysteine motifs which, together with the 14 kDa C-terminal region, form a 30 kDa DNA binding domain (ZD domain). The 67 kDa N-terminal domain (Top67) has the active site tyrosine for DNA cleavage but cannot relax negatively supercoiled DNA. We analyzed the role of the ZD domain in the enzyme mechanism.     

Synthesis and Characterization of Pyrrolthiosemicarbazone Complexes of Palladium(II). Crystal Structures of [{Pd[C4H4NC(H)=NNC(S)NHMe](Cl)}2{μ‐Ph2P(CH2)3PPh2}] and [Pd{C4H4NC(H)=NNC(S)NHMe}{Ph2P(CH2)2PPh2‐P,P}](Cl)

Reaction of the thiosemicarbazone ligands C₄H₄NC(H)=NN(H)C(S)NHR (R = Me, a ; Et, b ) with Li₂[PdCl₄] gave the dinuclear complexes [Pd{C₄H₄NC(H)=NNC(S)NHR}(μ‐Cl)]₂ (R = Me, 1a ; Et, 1b ) with a central Pd₂Cl₂ core and with deprotonation of the thiosemicarbazones at the hydrazinic nitrogen atom. Treatment of 1a and 1b with triphenylphosphine gave the mononuclear compounds [Pd{C₄H₄C(H)=NNC(S)NHR}(Cl)(PPh₃)] (R = Me, 2a ; Et, 2b ), whereas reaction of 1a and 1b with tertiary diphosphines gave mono‐ and dinuclear compounds, as appropriate, with the corresponding diphosphine acting as a monodentate ( 6b ), chelating ( 3a ) and bridging ligand ( 4a, 5a , 4b, 5b ). Treatment of 1a and 1b with (Ph₂PCH₂CH₂PPh₂)W(CO)₅ gave the new heterobimetallic complexes 7a and 7b . The crystal structures of complexes 3a and 4a are described.     

Polarometrische bestimmung von zirkonium(IV) mit tartrazin

A new polarimetric procedure has been developed for the rapid determination of zirconium in the presence of tartrazin as reagent This determination is possible in the presence of uranium.