Synthesis and thermal behavior of new ambazone complexes with some transitional cations

Ambazone is a pharmaceutical compound that possesses antiseptic activity and tested as well for anti-tumor properties. Metal complexes of Zn(II), Fe(III), and Cu(II) containing ambazone as ligand were synthesized using a molar ratio salt:ligand of 1:1, heating the mixture up to 50 °C for 6 h. Coordination compounds were characterized by thin-layer chromatography, FT-IR spectroscopy, elemental analysis, and thermal behavior. The non-isothermal experiments were carried out in order to investigate the thermal degradation process of these complexes and were performed in a dynamic air atmosphere at a heating rate β = 10 °C min^?1 from ambient temperature, up to 500 °C. It was revealed that decomposition process is a multistadial one.     

Polymeric Membranes Containing Phosphorus in the Chain for Solid Polymer Electrolytes

Abstract

Two new series of solid polymer electrolytes (SPEs) based on phosphorus containing (co)polyesters (PPE) and Lithium triflate were obtained. PPEs are composed of phosphonate moeties (cyclohexyldichlorophosphonate (CHDP)) as linking agent and two diols: PEG (6000) and poly(tetramethylene glycol) (PTMG) in PPE I, and PEG (6000) and 4,4′-cyclohexylidenebisphenol (bisphenol Z, BZ) in PPE II. Polycondensation was carried out in solution in the presence of triethylamine (TEA) as scavenger of HCl side product (PPE I–IIa) and in the absence of any acid acceptor (PPE I–IIb). The Limiting Oxygen Index (LOI) and thermal analysis were performed both on polymers and membranes. The ionic conductivity of SPE membranes based on PPE-salt complexes, with various salt concentrations, was investigated at different temperature and ionic transference numbers were determined. Optimum composition was obtained for the polymer which contains in structure only alkyl units and 15% Lithium triflate.     

Quinine sulfate: a pharmaceutical product as effective corrosion inhibitor for carbon steel in hydrochloric acid solution

Quinine sulfate dihydrate (QNS), IUPAC name: (8S,9R)-6-methoxy-4-quinolenyl-5-vinyl-2-quinuclidinyl methanol sulfate dihydrate, was tested as corrosion inhibitor for carbon steel in 1.5 mol L^?1 HCl solution using the potentiodynamic polarization and the electrochemical impedance spectroscopy (EIS) associated with UV-Vis spectrophotometry. The electrochemical results showed that, the inhibition efficiency (IE) increased with the increase in QNS concentration, reaching a maximum value of 93.35±0.25%. The polarization resistance (R _p) followed the same trend, obtaining the highest value of 659.7 Ω cm², while the corrosion current density (i _corr) reached the lowest level of 195 µA cm^?2. The action mechanism of QNS was proposed considering the ability of quinine (QN) to be adsorbed on the metal surface via the lone pairs of electrons from hydroxyl oxygen atom, and/or from quinoline and quinuclidinic nitrogens. The occurrence of the complexes between inhibitor and iron ions was considered an additional process, which may contribute to protective layer formation. The Temkin adsorption isotherm was found as the best fitting for the degree of surface coverage (θ) values. In order to elucidate the mechanism of protective layer formation, the free energy of adsorption (ΔG ^o _ads) value was calculated. This indicates that the inhibitor acts by chemical adsorption on the steel surface.

Open image in new window

     

Comparison of essential oil components and in vitro anticancer activity in wild and cultivated Salvia verbenaca

The objectives of our research were to study the chemical composition and the in vitro anticancer effect of the essential oil of Salvia verbenaca growing in natural sites in comparison with those of cultivated (Sc) plants. The oil from wild (Sw) S. verbenaca presented hexadecanoic acid (23.1%) as the main constituent, while the oil from Sc plants contained high quantities of hexahydrofarnesyl acetone (9.7%), scarce in the natural oil (0.7%). The growth-inhibitory and proapoptotic effects of the essential oils from Sw and Sc S. verbenaca were evaluated in the human melanoma cell line M14, testing cell vitality, cell membrane integrity, genomic DNA fragmentation and caspase-3 activity. Both the essential oils were able to inhibit the growth of the cancer cells examined inducing also apoptotic cell death, but the essential oil from cultivated samples exhibited the major effects.     

Formulation of Aluminum Chloride Phthalocyanine in Pluronic™ P‐123 and F‐127 Block Copolymer Micelles: Photophysical properties and Photodynamic Inactivation of Microorganisms

Aluminum Chloride Phthalocyanine (AlPcCl) can be used as a photosensitizer (PS) for Photodynamic Inactivation of Microorganisms (PDI). The AlPcCl showed favorable characteristics for PDI due to high quantum yield of singlet oxygen (Φ_Δ) and photostability. Physicochemical properties and photodynamic inactivation of AlPcCl incorporated in polymeric micelles of tri‐block copolymer (P‐123 and F‐127) against microorganisms Staphylococcus aureus, Escherichia coli and Candida albicans were investigated in this work. Previously, it was observed that the AlPcCl undergoes self‐aggregation in F‐127, while in P‐123 the PS is in a monomeric form suitable for PDI. Due to the self‐aggregation of AlPcCl in F‐127, this formulation did not show any effect on these microorganisms. On the other hand, AlPcCl formulated in P‐123 was effective against S. aureus and C. albicans and the death of microorganisms was dependent on the PS concentration and illumination time. Additionally, it was found that the values of PS concentration and illumination time to eradicate 90% of the initial population of microorganisms (IC₉₀ and D₉₀, respectively) were small for the AlPcCl in P‐123, showing the effectiveness of this formulation for PDI.     

Structural and morphological studies on the deformation behavior of polypropylene/multi‐walled carbon nanotubes nanocomposites prepared through ultrasound‐assisted melt extrusion process

Structural and morphological behavior under stress–strain of polypropylene/multi‐walled carbon nanotubes (PP/MWCNTs) nanocomposites prepared through ultrasound‐assisted melt extrusion process was studied by means of optical microscopy, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, small angle X‐ray scattering (SAXS), and wide angle X‐ray scattering (WAXS). A high ductile behavior was observed in the PP/MWCNT nanocomposites with low concentration of MWCNTs. This was related to an energy‐dissipating mechanism, achieved by the formation of an ordered PP‐CNTs interphase zone and crystal oriented structure in the undeformed samples. Different strain‐induced‐phase transformations were observed by ex situ SAXS/WAXS, characterizing the different stages of structure development during the deformation of PP and PP/MWCNTs nanocomposites. The high concentration of CNTs reduced the strain behavior of PP due to the agglomeration of nanoparticles. A structural pathway relating the deformation‐induced phase transitions and the dissipation energy mechanism in the PP/MWCNTs nanocomposites at low concentration of nanoparticles was proposed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 475–491     

Combination of hollow‐fiber‐supported liquid membrane and dispersive liquid–liquid microextraction as a fast and sensitive technique for the extraction of pesticides from grape juice followed by high‐performance liquid chromatography

The simultaneous use of a hollow‐fiber‐supported liquid membrane and dispersive liquid–liquid microextraction for the determination of pesticides directly in grape juice was investigated. The detection and quantification were performed by liquid chromatography with diode array detection. The optimum extraction condition was reached by filling the pores of the membrane wall with dodecanol and using hexane/acetone as extraction/dispersion solvents. Salt addition had a highly negative effect on the extraction efficiency and the optimum extraction time was 60 min. The volume of hexane/acetone mixture and the sample pH did not affect the signal at the levels studied. Therefore, an intermediate amount of these solvents (250 μL; 1:7.5 v/v) and pH 6 were selected. The optimum desorption condition was obtained with acetonitrile and 10 min of desorption time. The linear working range varied from 58 to 500 μg/L (parathion‐methyl), 62–500 μg/L (difenoconazole) and 107–500 μg/L (chlorpyrifos), with correlation coefficients ranging from 0.9980–0.9942. The limits of detection and quantification found were, respectively, 17 and 58 μg/L for parathion‐methyl, 19 and 62 μg/L for difenoconazole and 32 and 107 μg/L for chlorpyrifos. The relative standard deviation ranged between 3.5 and 11.2%.     

Two novel organic–inorganic hybrid materials from tetrachloridometallate(II) salts and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium

Two organic–inorganic hybrid compounds have been prepared by the combination of the 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium cation with perhalometallate anions to give 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridocobaltate(II), (C₁₂H₁₂N₂)[CoCl₄], (I), and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridozincate(II), (C₁₂H₁₂N₂)[ZnCl₄], (II). The compounds have been structurally characterized by single‐crystal X‐ray diffraction analysis, showing the formation of a three‐dimensional network through X—H...Cl_nM⁻ (X = C, N⁺; n = 1, 2; M = Co^II, Zn^II) hydrogen‐bonding interactions and π–π stacking interactions. The title compounds were also characterized by FT–IR spectroscopy and thermogravimetric analysis (TGA).     

Synthesis,characterization and controlled toxicity of a novel hybrid material based on cisplatin and docetaxel

This paper is focused on the synthesis and characterization of a novel hybrid material based on cisplatin and docetaxel-loaded functionalized simultanously carbon nanotubes able to be used in cancer therapy as drug delivery system with controlled toxicity. This material was physico-chemically investigated by determining the structure, as evidenced by Fourier transform infrared (FTIR) spectroscopy, transmission electronmicroscopy (TEM) and its stability was studied with the aid of thermogravimetric analysis (TGA). The amount of platinum ions released into the solution of simulated body fluid (SBF) was highlighted by coupled plasma mass spectrometry (ICP-MS). Toxicology experiments were performed with MDA-MB 231 breast cancer epithelial cells. The performance of the new drug delivery hybrid material was compared with functionalised carbon nanotubes with therapeutic agents functionalized with a single therapeutic agent.      

Studies on thermal,spectral, magnetic and biological properties of new Ni(II), Cu(II) and Zn(II) complexes with a bismacrocyclic ligand bearing an aromatic linker

Novel complexes of M₂LCl₄·nH₂O type (M:Ni, n = 4; M:Cu, n = 3 and M:Zn, n = 0; L: ligand resulted from 1,4-phenylenediamine, 3,6-diazaoctane-1,8-diamine and formaldehyde one-pot condensation) were synthesized and characterised by microanalytical, ESI–MS, IR, UV–Vis, ¹H NMR and EPR spectra, magnetic data at room temperature and molar conductivities as well. The electrochemical behaviour of complexes was investigated by cyclic voltammetry. Simultaneous TG/DTA measurements were performed in order to evidence the thermal behaviour of the obtained complexes. Processes such as water elimination, fragmentation and oxidative degradation of the organic ligand as well as chloride elimination occurred during thermal decomposition. The antimicrobial assays demonstrate that the compounds exhibited good antibacterial activity, especially against S. aureus and E. coli strains, the most active being the copper(II) complex, which also exhibited the most prominent anti-biofilm effect, suggesting its potential use for the development of new antimicrobial agents. The biological activity was correlated with log P _ow values. All complexes disrupt the membrane integrity of HCT 8 tumour cells.