Cellulose microfibrils from banana farming residues: isolation and characterization

Cellulose microfibrils have been prepared from banana rachis using a combination of chemical and mechanical treatments. The morphology and structure of the samples were characterized using transmission electron microscopy, atomic force microscopy, and X-ray diffraction. Fourier-transformed infrared spectroscopy (FTIR) was used to characterize the chemical modifications of the samples after each treatment. Suspensions of bundled or individualized 5-nm-wide microfibrils were obtained after homogenization (PH) whereas an organosolv (PO) treatment resulted in shorter aggregates of parallel cellulose microcrystallites. The sharper rings in the X-ray diffraction pattern of the PO-treated sample suggest a higher crystallinity due to a more efficient removal of hemicelluloses and dissolution of amorphous zones by the acid treatment. Both microfibrils and microcrystals prepared by both methods can be used as reinforcing filler in nanocomposite materials.     

Reference materials for marine science

Summary The second edition of the catalog of reference materials suited for use in marine science, originally compiled in 1986 for NOAA, IOC and UNEP, has been recently completed. The catalog lists more than 900 reference materials from thirteen producers and contains information about their proper use, sources, availability, and analyte concentrations. The reference material matrices include ashes, airborne particulate matter, gases, oils, rocks and sediments, sludges, tissues and waters. Reference materials used for the evaluation of instruments and the determination of sample physical properties are also included. Indices are available for elements, isotopes and organic compounds, as are cross references to CAS registry numbers, and alternate names and chemical structures of selected organic compounds.     

Combined cysteine and homocysteine quantitation in plasma by trap and release membrane introduction mass spectrometry

Recently, a new and efficient method for total homocysteine (tHcy) quantitation in plasma using trap and release membrane introduction mass spectrometry (T&R-MIMS) with a versatile removable direct introduction membrane probe (DIMP) was described [R. Haddad, M. A. Mendes, N. F. Hoehr and M. N. Eberlin, Analyst, 2001, 126, 1212]. Herein we report on the use of the DIMP-T&R-MIMS technique for total cysteine (tCys) quantitation; hence combined tCys and tHcy quantitation in plasma or serum can be achieved. The method employs Cys and Hcy derivatization with ethyl chloroformate (after disulfide bond reduction with dithiothreitol and protein precipitation with trichloroacetic acid), preconcentration in a capillary silicone membrane, and their thermal desorption to the gas phase inside the ion source region of a mass spectrometer, at a point exactly between the two ionization filaments. Thermal desorption uses the uniform heat radiation provided by the two ionization filaments. The analytes are then ionized by electron ionization and both Cys and Hcy are quantitated by mass spectrometry using selected ion monitoring. For tCys quantitation, good linearity and reproducibility was observed for concentrations ranging from 5 to 350 microM, recovery was near 95%, and the limit of detection (LOD) was of 2 microM. This LOD is well below the mean Cys concentration in plasma, and serum samples from a large group of healthy people showed a mean tCys concentration of 132 +/- 45 microM.     

Determination of terazosin by cloud point extraction-fluorimetric combined methodology

A new sensitive and selective preconcentration-fluorimetric method for determination of terazosin based on its native fluorescence was developed. The analyte, initially present in aqueous matrix, was treated with an extractive non-ionic surfactant solution and separated by the clouding phenomenon. The optimum analytical conditions for terazosin assay were established. Under these conditions, linear calibration curves were obtained over the range of 1 × 10⁻⁵ to 7.0 μg mL⁻¹ with detection and quantification limits of 1.11 × 10⁻⁵ and 3.7 × 10⁻⁵ μg mL⁻¹, respectively. Additionally, the binding constant (K_B) for the terazosin-PONPE 7.5 system was determined given a value of 1028 L mol⁻¹. The developed coupled methodology, which thoroughly satisfies the typical requirements for pharmaceutical control processes, was proved to be appropriate for monitoring terazosin in actual pharmaceutical formulations and biological fluid sample. The results were validated by recovery test and by comparison with other reported methods, being highly satisfactory.     

Metabolic profiling of normal and hypertensive rat kidney tissues by hrMAS-NMR spectroscopy

Intact kidney tissue samples of normal and spontaneously hypertensive rats (SHRs) were analyzed by hrMAS-NMR spectroscopy and principal component analysis (PCA). Radial components (cortex, outer stripe of the outer medulla, inner stripe of the outer medulla, and papilla) were sampled from various regions across the kidney from multiple animals in order to establish inter- and intra-animal variability. The effects of temperature were also measured. Papilla was differentiated from the other tissue types, and this variation by tissue type was greater than the effect of temperature on the samples (spectra were compared from samples at 2 and 30 °C). This study also revealed long term stability issues of tissue storage at -80 °C. The PCA showed that the greatest differentiation between normal rats and SHRs was found in the cortex and the regions in the NMR spectra that were correlated with this variation were identified.Abbreviations hrMAS High-resolution magic angle spinning - NMR Nuclear magnetic resonance - PCA Principal component analysis - CSA Chemical shift anisotropy - DD Dipolar coupling - SHR Spontaneously hypertensive rat     

Stability studies of transition-metal linkage isomers using quantum mechanical methods. Groups 11 and 12 transition metals

Several hypotheses to elucidate the linkage isomer preference of the thiocyanate (SCN(-)) ion have been offered. For complexes with small coordination numbers (i.e., 1 and 2) and groups 11 (Cu-triad) and 12 (Zn-triad) metals, different levels of theory and a variety of basis sets have been employed to study linkage isomerism. Similar results are obtained for all density functionals tested, pure and hybrid. Overall, good agreement, vis-à-vis experimentally identified linkage isomers, is achieved for ab initio techniques, whereas semiempirical quantum mechanical methods show a bias toward S-ligated isomers. Despite the seeming ease for the a priori prediction of the most stable thiocyanate isomers using acid/base principles, this research highlights the sensitivity of quantitative calculations of transition-metal linkage isomerism to the choice of basis set and electron correlation, particularly with post-Hartree-Fock treatments.     

Flow injection analysis: Rayleigh light scattering technique for total protein determination

A novel flow injection analysis (FIA) method with Rayleigh light scattering (RLS) detection was developed for the determination of total protein concentrations. This method is based on the weak intensity of RLS of bromothymol blue (BB) (3',3"-dibromothymolsulfonephthalein) which can be enhanced by the addition of protein in weakly acidic solution. A common spectrofluorimeter was used as a detector. It was proved that the application of this method to quantify the total proteins in real samples by using bovine serum albumin was possible. The RLS signal was detected at lambda(ex)= lambda(em)=572 nm. The linear range was 7.0-70.0 microg mL(-1), the detection limit was 3.75 microg mL(-1), the reproducibility was 5.5% (n=7), and the sample throughput was 26 h(-1).     

Preparation and characterization of chelating resins loaded with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol for preconcentration of rare earth elements

 Chelating resins prepared by sorption of 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol (5-BrPADAP) on macroporous resins (Amberlite XAD-4 and XAD-7) were characterized. The adsorption properties (amount of chelating agent adsorbed per gram of resin, sorption kinetics, retention capacity, etc.) and the thermodynamic quantities of each adsorption process were determined. The retention of some rare earth elements (e.g. Er, Yb and Lu) on these chelating resins was studied in order to preconcentrate them for their determination by X-Ray fluorescence spectrometry. Received: 7 September 1995/Revised: 2 January 1996/Accepted: 10 January 1996     

Isomerisation of ω-hydroxyalkenes under hydroxycarbonylation conditions in palladium catalysed aqueous phase systems

The ω-hydroxyolefins 3-buten-1-ol, 3-buten-1-methyl-1-ol and 4-penten-1-ol were subjected to hydroxycarbonylation conditions in water in the presence of PdCl₂(PhCN)₂ and 4-8 equiv. of water soluble tris(3-sodiumsulfonatophenyl)phosphine (TPPTS), or N-bis(N′,N′-diethyl-2-aminoethyl)-4-aminomethylphenyl-diphenylphosphine (N3P). Under conditions of high conversion, the olefins primarily undergo isomerisation through a chain walking mechanism with selectivities for aldehyde ranging from 65% to 98%, with the lower values for longer chain alcohols. The lactones formed as the minor product are almost exclusively branched, indicating that in the first step 2,1-insertion is strongly favoured over 1,2-insertion. In the N3P system also linear lactone is produced at lower conversion. Running the reaction in D₂O produces multiple deuterium incorporation in all positions of the carbon chain. A mechanism is discussed.     

Tertiary phosphine abstraction from a platinum(II) coordination complex with SeCN: Crystal and molecular structures of SePTA and [SePTA-Me]I · CH3OH

Reacting [PtCl(PTA)₃]Cl(PTA = 1,3,5-triaza-7-phosphatricyclo[3.3.1.1^3,7]decane) with KSeCN in aqueous or MeOH medium results in the abstraction of the PTA ligands to yield SePTA. The reaction also proceeds quantitatively by direct reaction of PTA and KSeCN in water or methanol. The methylated PTA ligand, [PTA-Me]I (1-methyl-1-azonia-3,5-diaza-7-phosphatricyclo[3.3.1.1^3,7]decane iodide), reacts accordingly with KSeCN, albeit significantly slower. The crystal structure of SePTA, 1, and [SePTA-Me]I · CH₃OH, 2, revealed PSe bond distances of 2.0991(19) and 2.100(2) Å, respectively. The first order phosphorous selenium coupling constants, ¹J_P-Se (D₂O), of 722 and 788 Hz for SePTA and [SePTA-Me]I, respectively, indicates the latter is significantly less electron rich.