The far infrared spectrum of trans-formic acid: An extension up to 175 cm−1

The far infrared spectrum of HCOOH was recorded at a high resolution (0.0009 cm^?1) and long path length (72 m) at the far-infrared beamline, Canadian Light Source. Spectra were recorded in the region 62–300 cm^?1, showing transitions from the trans-isomer.Ground state rotational transitions with K_a up to 30, were identified up to 175 cm^?1, extending the observation reported in the literature. A total of 3321 transitions were assigned and fitted together with previous (4149) published data. An improved set of rotational parameters was obtained adopting the symmetric top (A) reduction of the rotational Hamiltonian in the I^r representation. The newly measured far infrared transitions allowed the determination of all diagonal and off diagonal 8th order parameters L and of some of the diagonal 10th order parameters P.     

A survey of dual-feasible and superadditive functions

Dual-feasible functions are valuable tools that can be used to compute both lower bounds for different combinatorial problems and valid inequalities for integer programs. Several families of functions have been used in the literature. Some of them were defined explicitly, and others not. One of the main objectives of this paper is to survey these functions, and to state results concerning their quality. We clearly identify dominant subsets of functions, i.e. those which may lead to better bounds or stronger cuts. We also describe different frameworks that can be used to create dual-feasible functions. With these frameworks, one can get a dominant function based on other ones. Two new families of dual-feasible functions obtained by applying these methods are proposed in this paper.     

Ultrastructure of the Alabama argillacea (Hübner) (Lepidoptera: Noctuidae) midgut

The insect midgut has ultimately been the focus of researches tempting to control insect pests because alterations in the insect gut may affect not only its development, but also physiological events such as nutrient absorption and transformation. The objective of the present work was to describe morphologically, histochemically, and ultrastructurally the larva midgut of Alabama argillacea (Hübner) (Lepidoptera: Noctuidae), a cotton key pest in Brazil. Light and electronic transmission microscopy was used to obtain images from midgut sections of late fourth-instar larvae of A. argillacea. In general, the morphology, histochemistry, and ultrastructure characteristics of A. argillacea midgut follow that described in the literature for other lepidopteran species. However, the results showed a mitochondrial polymorphism and branched microvilli, which suggest an ultrastrucutural and physiological modification possibly associated with a high absorption and secretion activity by the columnar cells of this species. This intense activity may favor a faster response related to the action of ingested microbial agents and/or toxins, and can explain the high susceptibility of A. argillacea to the agents of control such as the toxin of Bacillus thuringiensis.     

Synthesis of Mixed Alkylphosphites and Alkylphosphates

Some mixed phosphites having two different alkyl chain were obtained as forerunners for mixed phosphates Mixed dialkyl phosphates were obtained in good yields (40-80%) by phase transfer catalysis in liquid-liquid sistem, starting from different dialkyl phosphites and aliphatic alcohols. The reaction conditions were optimized in order to obtain good yields in phosphites and phosphates respectively. Compounds were analyzed by IR, P 31 -NMR.     

SALS,WAXS and mechanical properties of heat‐treated thermotropic polymers

The influence of heat treatment on the texture, microstructure and tensile mechanical properties of extruded thin films of a series of high‐performance thermotropic liquid crystal polymers (LCPs) was investigated. LCPs based on random units of hydroxybenzoic acid (B), hydroxynaphthoic acid (N), terephthalic acid (TA) and biphenol (BP) were kindly supplied by the former Hoechst Celanese Corp as 50 µm thick extruded tapes. The LCPs, denoted B‐N, COTBP and RD1000, have B and N as common comonomers and vary the other comonomers. Thus, this study also enables the investigation of the influence of monomer composition on microstructure and mechanical properties. Heat treatments were carried out at temperatures close to the solid‐to‐nematic transition (T_s→n) for periods up to 5 h, under dry air conditions. The thermal treatment produced either two endotherms or a small increase of T_s→n (B‐N and RD1000), or increased significantly T_s→n (COTBP). Moreover, when heat treatment was carried out approximately 40°C below the respective T_s→n, the mechanical Young's modulus, E, along the extrusion axis, increased for all LCPs. Strikingly, for COTBP, E increased over 100% relative to the as‐extruded film. The results also showed that the optimum treatment time for improving the Young modulus, under dry air atmosphere, was between 3 and 4 h. Wide‐angle X‐ray scattering showed a significant sharpening of crystalline reflections and concentration of the 002 meridional reflection as a result of thermal treatment, suggesting the elimination of defects and a better alignment of the molecular chains along the extrusion axis. This would explain the increase in tensile modulus. Copyright © 2013 John Wiley & Sons, Ltd.     

Crosslinked Networks Based on Polysaccharides and Collagen for Pilocarpine Sustained Release

The paper presents the experimental studies regarding synthesis and characterization of hydrogels based on gellan (Gel)/chitosan (CS) and collagen (Col), obtained by crosslinking with glutaraldehyde (GLA). The influence of the polysaccharide content and GLA ratio on the final composition and swelling characteristics was evaluated. Hydrogels swelling analysis, in distilled water and phosphate buffer (PBS, pH 7.2) has shown higher swelling degrees at increased concentration of polysaccharide into hydrogels. In vitro release of pilocarpine has demonstrated the possibility to use gellan-collagen and chitosan-collagen hydrogels as ophthalmic drug delivery matrix.     

Compatibility study of the acetylsalicylic acid with different solid dosage forms excipients

This study is part of a research project aimed to find and optimize methods by which drug-excipient compatibility can be reliably and quickly assessed. The objective of the present study was to evaluate the compatibility of the acetylsalicylic acid (ASA), an non-steroidal anti-inflammatory drug, with pharmaceutical excipients of common use including diluents, binders, disintegrants, lubricants and solubilising agents. In order to investigate the possible interactions between ASA and eleven excipients differential scanning calorimetry (DSC) and thermogravimetry/derivative thermogravimetry analysis completed by Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction were used for compatibility study. The DSC has proven to be, among the selected analytical techniques, the most sensitive and specific in assessing the compatibility. The samples, as physical mixtures, were prepared by mixing the analyte and excipients in a proportion of 1:1 (w:w). On the basis of thermal results (especially DSC), confirmed by FT-IR and X-ray analysis, a possible chemical interaction was found between the ASA with polyvinylpyrrolidone K30 (PVP) and magnesium stearate, respectively a possible physical interaction with colloidal silicon dioxide and stearic acid (Ac. St.).     

Thermal analysis of corrosion products formed on carbon steel in ammonium chloride solution

The influence of different ions NO₃ ^? and SO₄ ^2? on the carbon steel corrosion in ammonium chloride was investigated using mass loss measurements and potentiodynamic polarization. Corrosion products were analyzed using X-ray photoelectron spectroscopy (XPS) and simultaneous thermal and differential scanning calorimetry (TG/DSC). XPS analysis shows that the main product of corrosion is a non-stoichiometric Fe³⁺ oxyhydroxide, consisting of a mixture of FeO(OH) and FeO(OH) containing inclusions of these anions, species such as Fe³⁺O(OH,Cl^?); Fe³⁺O(OH,SO₄ ^2?); and Fe³⁺O(OH,NO₃ ^?). TG/DSC confirms the decomposition of the rusty products formed by chemical corrosion, compounds like Fe³⁺ oxyhydroxides, with β-FeOOH as the major phase, crystal structure of which may contain Cl^?, NO₃ ^?, and SO₄ ^2?—e.g., akaganeite [Fe³⁺O(OH,A)].     

Simultaneous Determination of Nickel and Cobalt Using a Solid Bismuth Vibrating Electrode by Adsorptive Cathodic Stripping Voltammetry

A simple, fast, sensitive and greener voltammetric procedure for simultaneous analysis of nickel (Ni) and cobalt (Co) by square wave adsorptive cathodic stripping voltammetry (SW‐AdCSV) using a solid bismuth vibrating electrode is presented for the first time. The procedure enables to determine Ni together with Co, in ammonia buffer 0.1 M (pH 9.2) and in the presence of oxygen, and involves an adsorptive accumulation of metal‐dimethylglyoxime (Ni‐DMG and Co‐DMG) complexes on the electrode surface. For Ni and Co, the detection limits, obtained with 30 s of accumulation time, were 0.6 and 1.0 µg L^?1, respectively. The method was free of metals (Cd²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Fe³⁺ and Pb²⁺ up to 50 µg L^?1, Al³⁺ and Mn²⁺ up to 500 µg L^?1; Zn²⁺ up to 300 µg L^?1) interferences up to the concentrations mentioned in brackets. The proposed method was validated for simultaneous determination of Ni and Co in a certified reference surface and river waters with good results.