Chemical Composition,Antioxidant and Antimicrobial Activity of Some Types of Honey from Banat Region,Romania

Honey is a natural product with multiple health benefits. The paper presents the chemical characterization and the antioxidant and antimicrobial potential of ten types of honey (knotweed, linden, wild cherry, acacia, honeydew, oilseed rape, sunflower, phacelia, plain polyflora and hill polyflora) from the Banat region, Romania. We studied the water content, dry matter, impurities, acidity and pH of honey. We also determined the content of reducing sugar, minerals and flavonoids and the total phenolic content. All honey samples analysed showed good nutritional characteristics according to the standard codex for honey. From the analysis of the mineral content of the honey samples, we observed a variability in the macro and microminerals, influenced by the botanical origin, ranging between 0.25% (wild cherry honey) and 0.54% (honeydew). The toxic metals’ (Cd and Pb) levels met the standard for almost all samples analysed except for knotweed. The flavonoid content of the samples ranged from 9.29 mg QE/100 g for wild cherry honey to 263.86 mg QE/100 g for linden honey, and for polyphenols between 177.6 mgGAE/100 g for acacia honey and 1159.3 mgGAE/100 g for honeydew. The best antioxidant capacity was registered in the case of linden honey (79.89%) and honeydew (79.20%) and the weakest in acacia (41.88%) and wild cherries (50.4%). All studied honey samples showed antimicrobial activity, depending on the type of honey, concentration and strain analysed. The novelty of this study is given by the complex approach of the study of honey quality, both from the perspective of chemical attributes and the evaluation of the antimicrobial potential on specific strains in correlation with the botanical and geographical origin of the analyzed area.     

Antiradical and cytotoxic activity of different Helichrysum plicatum flower extracts

Flowers of Helichrysum plicatum were extracted under different experimental conditions, and their antioxidant activity was determined by DPPH radical scavenging assay. Extracts obtained with higher concentration of ethyl acetate (90% or 100%) were found to contain the greatest amount of total phenolics (> 250 mg gallic acid equivalents/g of dried extract), and high correlation between total phenolic content and antiradical activity was observed (r = -0.79). Based on the total phenolic content and antiradical activity, some extracts were selected for investigation of cytotoxic activity toward PC3, HeLa and K562 human cancer cell lines in vitro. All tested extracts exhibited moderate activity against HeLa cells (41.9-42.1 microg/mL), whereas the extract obtained with 100% ethyl acetate was the most active against K562 and PC3 cell lines (25.9 and 39.2 microg/mL, respectively). Statistical analysis revealed significant correlation between total phenolic content and cytotoxic activity against PC3 and K562 cells. HPLC identification of phenolic compounds from the extracts indicated the presence of apigenin, naringenin and kaempferol as free aglycones, and glycosides of apigenin, naringenin, quercetin and kaempferol. Among aglycones, kaempferol displayed moderate cytostatic activity against all cell lines (24.8-64.7 microM).     

The kinetics and mechanism of the oxidation of DL ethionine and thiourea by potassium ferrate

The kinetics of the reaction between ethionine and thiourea were investigated under pseudo and non-pseudo-first-order conditions. Ethionine was oxidized to the sulfoxide within 500 s and thiourea was oxidized to urea within 10 s. Above a pH of ca. 8.5 the reaction was first-order in the concentration of the organosulfur compound, the hydrogen ions and the ferrate ions, whereas, below this pH, the kinetics were independent of the hydrogen ion concentration. A possible mechanism for both compounds is initial protonation of the ferrate ion followed by the two electron rate-determining step of addition of oxygen to the organosulfur compound. The kinetic parameters for ethionine compare favorably with those for similar compounds, whereas thiourea tends to be more active. The rate constant for the rate-determining step is 4.1 × 10² M^–1 s^–1 for ethionine and 4.1 × 10³ M^–1 s^–1 for thiourea.     

Structure formation of integral-asymmetric membranes of polystyrene-block-Poly(ethylene oxide)

For the first time the combination of solution casting and solvent–nonsolvent exchange (phase inversion) has been applied to generate asymmetric membranes with highly ordered hexagonally packed cylinders with perpendicular orientation composed of polystyrene-block-poly(ethylene oxide). The influence of parameters like solvent composition and evaporation time on the membrane formation is presented. The development is based on a study of the solution behavior by dynamic light scattering and the precipitation behavior of the cylinder forming diblock copolymer by turbidity measurements from different solvent and nonsolvent systems. The water flux properties, as an important membrane characteristic, show a time dependent behavior, due to swelling of the polyethylene oxide blocks. The morphologies of the membranes are imaged by scanning electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Microstructures and growth characteristics of polyelectrolytes on silicon using layer-by-layer assembly

Growth processes of nanocomposite layers obtained by polyelectrolytes, poly(sodium 4-styrenesulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDADMAC), self-assembled on silicon surface using layer-by-layer (LbL) technique were investigated, and theoretical and experimental data are herein reported. Complementary microstructural and compositional analyses techniques (scanning electron microscopy, ellipsometry, X-ray reflectivity, zeta (ξ) potential measurements and attenuated total reflection infrared spectroscopy) were used for deep characterization of the multilayer structure formation. Electrophoretic zeta (ξ) potential measurements indicated that the surface charge was either positive or negative, depending on the polyelectrolyte used (PDADMAC or PSS). ATR-IR spectra confirmed the successfully silanization process and then, the building up of the nanocomposite layer. Morphological investigation and X-ray reflectivity demonstrated the growth process and cross-section size of the bilayers. Ellipsometric measurements were in very good agreement with SEM and XRR, showing once again the successful deposition of polyelectrolyte multilayers.      

Linker Hydrophilicity Modulates the Anticancer Activity of RGD–Cryptophycin Conjugates

Most anticancer agents are hydrophobic and can easily penetrate the tumor cell membrane by passive diffusion. This may impede the development of highly effective and tumor-selective treatment options. A hydrophilic β-glucuronidase-cleavable linker was used to connect the highly potent antimitotic agent cryptophycin-55 glycinate with the α_vβ₃ integrin ligand c(RGDfK). Incorporation of the self-immolative linker containing glucuronic acid results in lower cytotoxicity than that of the free payload, suggesting that hydrophilic sugar linkers can preclude passive cellular uptake. In vitro drug-release studies and cytotoxicity assays demonstrated the potential of this small molecule–drug conjugate, providing guidance for the development of therapeutics containing hydrophobic anticancer drugs.     

Bilayer vesicles of amphiphilic cyclodextrins: host membranes that recognize guest molecules

A family of amphiphilic cyclodextrins (6, 7) has been prepared through 6-S-alkylation (alkyl=n-dodecyl and n-hexadecyl) of the primary side and 2-O-PEGylation of the secondary side of alpha-, beta-, and gamma-cyclodextrins (PEG=poly(ethylene glycol)). These cyclodextrins form nonionic bilayer vesicles in aqueous solution. The bilayer vesicles were characterized by transmission electron microscopy, dynamic light scattering, dye encapsulation, and capillary electrophoresis. The molecular packing of the amphiphilic cyclodextrins was investigated by using small-angle X-ray diffraction of bilayers deposited on glass and pressure-area isotherms obtained from Langmuir monolayers on the air-water interface. The bilayer thickness is dependent on the chain length, whereas the average molecular surface area scales with the cyclodextrin ring size. The alkyl chains of the cyclodextrins in the bilayer are deeply interdigitated. Molecular recognition of a hydrophobic anion (adamantane carboxylate) by the cyclodextrin vesicles was investigated by using capillary electrophoresis, thereby exploiting the increase in electrophoretic mobility that occurs when the hydrophobic anions bind to the nonionic cyclodextrin vesicles. It was found that in spite of the presence of oligo(ethylene glycol) substituents, the beta-cyclodextrin vesicles retain their characteristic affinity for adamantane carboxylate (association constant K(a)=7.1 x 10(3) M(-1)), whereas gamma-cyclodextrin vesicles have less affinity (K(a)=3.2 x 10(3) M(-1)), and alpha-cyclodextrin or non-cyclodextrin, nonionic vesicles have very little affinity (K(a) approximately 100 M(-1)). Specific binding of the adamantane carboxylate to beta-cyclodextrin vesicles was also evident in competition experiments with beta-cyclodextrin in solution. Hence, the cyclodextrin vesicles can function as host bilayer membranes that recognize small guest molecules by specific noncovalent interaction.     

Extended diffusion in a double well potential: Transition from classical to quantum regime

The transition between the classical and quantum regimes in the diffusion of a particle in a 2-4 double-well potential is treated via the strong collision model in the high-temperature limit. Both the classical and semiclassical position correlation functions, their spectra, and correlation times are evaluated using the memory function formalism. It is shown that even in the high temperature limit, marked classical-quantum transition effects appear in the observables when collisions are rare.     

Thermal stabilities of some benzaldehyde 2,4-dinitrophenylhydrazones

The thermal stability of some benzaldehyde 2,4-dinitrophenylhydrazones has been studied using DSC technique. The crystalline solids are thermally stable and start to decompose after melting. Non-isothermal DSC curves, recorded at several heating rates, were used to evaluate the melting properties and the kinetics of thermal decomposition. Both isoconversional and model fitting methods were used for the evaluation of the kinetic parameters. Based on the results of the model free method, a kinetic model was derived and the kinetic parameters were obtained by means of a multivariate non-linear regression. A good agreement between the experimental and fitted data was found.