Electrochemical oxidation of p-nitrophenol using graphene-modified electrodes, and a comparison to the performance of MWNT-based electrodes

The electrochemical oxidation of p-nitrophenol (p-NP) has been studied comparatively on a graphene modified electrode and a multiwall carbon nanotube (MWNT) electrode by using cyclic and differential pulse voltammetry. The sensors were fabricated by modifying screen-printed electrodes with graphene and MWNT nanomaterials, respectively, both dispersed in Nafion polymer. p-NP is irreversibly oxidized at +0.9?V (vs. the Ag/AgCl) in solutions of pH 7. The height and potential of the peaks depend on pH in the range from 5 to 11. In acidic media, p-NP yields a well-defined oxidation peak at +0.96?V which gradually increases in height with the concentration of the analyte. In case of differential pulse voltammetry in sulfuric acid solution, the sensitivity is practically the same for both electrodes. The modified electrodes display an unusually wide linear response (from 10???M to 0.62?mM of p-NP), with a detection limit of 0.6???M in case of the graphene electrode, and of 1.3???M in case of the MWNT electrode.

A lower bound for the stability radius of time-varying systems

We introduce and characterize the stability radius of systems whose state evolution is described by linear skew-product semiflows. We obtain a lower bound for the stability radius in terms of the Perron operators associated to the linear skew-product semiflow. We generalize a result due to Hinrichsen and Pritchard.

     

Perron Conditions for Uniform Exponential Expansiveness of Linear Skew-Product Flows

 We present necessary and sufficient conditions for uniform exponential expansiveness of discrete skew-product flows, in terms of uniform complete admissibility of the pair (c ₀(N, X), c ₀(N, X)). We give discrete and continuous characterizations for uniform exponential expansiveness of linear skew-product flows, using the uniform complete admissibility of the pairs (c ₀(N, X), c ₀(N, X)) and (C ₀(R ₊, X), C ₀(R ₊, X)), respectively. We generalize an expansiveness theorem due to Van Minh, R?biger and Schnaubelt, for the case of linear skew-product flows.     

Novel N-(4-Piperidinyl)benzamide antimalarials with mammalian protein farnesyltransferase inhibitory activity

Protein farnesyltransferase of Plasmodium falciparum is a potential target in the treatment of malaria for which increased drug resistance is observed. The design, synthesis and evaluation of a series of N-(4-piperidinyl)benzamides is reported. The most potent compounds showed in vitro activity against the parasite at submicromolar concentrations.     

A new packing motif for para-sulfonatocalix[4]arene: the solid state structure of the para-sulfonatocalix[4]arene D-arginine complex

The solid-state structure of the complex of para-sulfonatocalix[4]arene with d-arginine, contains a water channel diagonal to a zigzag bilayer of the host, within the bilayer six crystallographically independent molecules of arginine are present, four being included in the calix cavities.     

Vitamin B12 supported on graphene oxide: As a bio‐based catalyst for selective aerobic oxidation of alcohols

The environmental impact of chemical processes has now opened new windows of opportunity for bio‐based catalysts. In this paper a highly active bio‐based catalyst of vitamin B₁₂ supported on graphene oxide nanosheets is reported for the selective aerobic oxidation of alcohols to the corresponding carbonyl compounds. Operational simplicity, mild reaction conditions, high yield and selectivity, non‐hazardous nature, commercial availability and affordability are the main advantages of this novel catalytic system.     

Synthesis, spectral characterization, and thermal behavior of mononuclear Cu(II), Co(II), Ni(II), Mn(II), and Zn(II) complexes with 5-bromosalycilaldehyde isonicotinoylhydrazone

A bidentate/tridentate 5-bromosalycilaldehyde isonicotinoylhydrazone Schiff base was synthesized by condensing 5-bromosalycilaldehyde with isonicotinoylhydrazine. Cu(II), Co(II), Ni(II), Mn(II) and Zn(II) complexes of this chelating ligand were synthesized using nitrates of these metals. The ligand and the complexes were characterized by elemental analysis, UV–Vis, IR and EPR spectroscopy, conductance and magnetic susceptibility measurements, fluorescence, cyclic voltammetry and thermogravimetric analysis. The ligand and Zn(II) complex exhibits solid-state photoluminescence at room temperature.     

Physico-chemical properties investigation of softwood surface after treatment with organic anhydride

Wood originating from a softwood species was subjected to chemical treatment by reaction with succinic anhydride in N, N-dimethylformamide at different concentration values. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis were used to study changes that occurred on a softwood surface. The extent of chemical treatment on softwood was evaluated by determining the weight percent gain values. Thermal properties of modified softwood and the water absorption were also evaluated. The chemical treatment with succinic anhydride influenced the thermal stability of the softwood samples with increasing anhydride concentration levels.      

Nanoparticles synthesis by electron beam radiolysis

Electron beam (EB) irradiation is a useful method to generate stable silver nanoparticles without the interference of inherent impurities generated from chemical reactions. Our experiments were carried out using linear electron beam accelerators with two different EB absorbed dose rates: 2 kGy min^?1 and 7–8 kGy s^?1, and with different absorbed dose levels. The optimum conditions for silver nanoparticles (AgNPs) generation by radiolysis, or by radiolysis combined with chemical reduction, were established. In order to obtain a good yield for AgNPs synthesized by radiolysis, a high dose rate is required, resulting in a rapid production process. At low absorbed dose rates, the utilization of a stabilization agent is advisable. By modifying the experimental conditions, the ratio between the chemical and radiolytic reduction process can be adjusted, thus it is possible to obtain nanoparticles with tailored characteristics, depending on the desired application.

Open image in new window