Dye attached poly(hydroxyethyl methacrylate) cryogel for albumin depletion from human serum

Cibacron Blue F3GA was immobilized on poly(hydroxyethyl methacrylate) cryogel and it was used for selective and efficient depletion of albumin from human serum. The poly(hydroxyethyl methacrylate) was selected as the basic component because of its inertness, mechanical strength, chemical and biological stability, and biocompatibility. Cibacron Blue F3GA was covalently attached to the poly(hydroxyethyl methacrylate) cryogel to produce poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel affinity column. The poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was characterized with respect to gelation yield, swelling degree, total volume of macropores, Fourier Transform Infrared spectroscopy, and scanning electron microscopy. It was found that the maximum amount of adsorption (343 mg/g of dry cryogel) obtained from experimental results is very close to the calculated Langmuir adsorption capacity (345 mg/g of dry cryogel). The maximum adsorption capacity for poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel column was obtained as 950 mg/g of dry cryogel for nondiluted serum. The adsorption capacity decreased with increasing dilution ratios while the depletion ratio of albumin remained as 77% in serum sample. Finally, the poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was optimized for using in the fast protein liquid chromatography system for rapid removal of the high abundant proteins from the human serum.     

Coumarin-based D–π–A dyes for efficient DSSCs: DFT and TD-DFT study of the π-spacers influence on photovoltaic properties

Research on Chemical Intermediates - A series of D–π–A architectures dyes with Coumarin-based derivatives as difluorenylaminocoumarin (DF) and diphenylaminocoumarin (DP) have been...     

Enhanced mobility and environmental stability in all organic field‐effect transistors: The role of high dipole moment solvent

Low‐operating voltage, high mobility, and stable organic field‐effect transistors (OFETs) using polymeric dielectrics such as pristine poly(4‐vinyl phenol) (PVP) and poly(methyl methacrylate) (PMMA), dissolved in solvents of high dipole moment, have been achieved. High dipole moment solvents such as propylene carbonate and dimethyl sulfoxide used for dissolving the polymer dielectric enhance the charge carrier mobilities by three orders of magnitude in pentacene OFETs compared with low dipole moment solvents. Fast switching circuits with patterned gate PVP‐based pentacene OFETs demonstrated a switching frequency of 75 kHz at input voltages of |5 V|. The frequency response of the OFETs is attributed to a high degree of dipolar‐order in dielectric films obtained from high‐polarity solvents and the resulting energetically ordered landscape for transport. Remarkably, these pentacene‐based OFETs exhibited high stability under bias stress and in air with negligible shifts in the threshold voltage. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1533–1542     

Co‐ and Counterion Effect on the Micellization Characteristics of Dodecylpyridinium Chloride

Micellization parameters, critical micelle concentration (cmc), degree of counterion dissociation (α), aggregation number (n), critical packing parameter, and hydrophobic core volume of Dodecylpyridinium chloride (DPC) micelles were determined in presence of varying concentrations of sodium chloride (NaCl), sodium acetate (SAc), sodium propionate (SPr), ethylammonium chloride (EACl), diethylammonium chloride (DEACl), tetraethylammonium chloride (TEACl), and propylammonium chloride (PACl) through conductometric investigations at 298.15 K. The resulting data suggests that both counter and coions affect the cmc values‐cmc depressing tendency of the salts varies in order PACl≈NaCl>EACl>DEACl>TEACl>SPr>SAc, while the degree of counterion dissociation is dependent on the nature and concentration range of the added salt. Increasing salt concentration increases the relative hydrophobic volume of the micelles and coion has not much effect on aggregation number.     

Pyridine solvated dioxouranium complex with salen ligand: Synthesis,characterization and luminescence properties

A new derivative of dioxouranium(VI) salen complex, [UO2(L)(pyridine)], where [L = N,N′-Bis(2-hydroxybenzylidene)-2,2-dimethyl-1,3-propanediamine] is synthesized and characterized by elemental analysis (C, H, N), FT-IR, ESI-MS spectrometry, UV/Vis, fluorescence, ¹H and ¹³C NMR spectroscopy and thermal gravimetric (TG) study. Furthermore, the single crystal X-ray diffraction measurements of the complex were carried out at 100 and 273 K. The crystal structure measurements revealed that the complex has distorted pentagonal bipyramidal geometry with uranium atom located at the centre and bonded to two phenoxy oxygen and two azomethine nitrogen in tetradenate fashion and one nitrogen from pyridine making it seven coordinated. In addition, the photoluminescence property of the complex was also recorded.     

Uranyl ion adsorption studies on synthesized phosphoryl functionalised MWCNTs: a mechanistic approach

Nickel hydroxide solubility has been studied in this work in different cementitious systems. Our results indicate that once Glenium^® 27, cement superplasticizer admixture, is added to water and then mixed with cement, this polymeric material is stabilized and not released back to the aqueous solution, with negligible effects on the mobility of nickel. Contrary to that, when Glenium^® 27 is added directly in solution at high dosages, an important effect is observed on nickel behaviour. Thermodynamic calculations indicate that the effect of such component on Ni is likely the effect that other small organics could have over this element.

     

Synthesis and mesomorphism behaviour of chalcones and pyrazoles type compounds as photo-luminescent materials

The following organic and organic–inorganic hybrid compounds were prepared as photo-luminescent materials following efficient and practical synthetic methods: 1,3-bis[4-(n-alkoxy)phenyl]-2-propen-1-one (where, n-alkoxy: O(CH₂)_nH, n = 6,7,8,9 or 10); 3,5-bis[4-(n-alkoxy)phenyl]-1H-pyrazole (where, n-alkoxy: O(CH₂)_nH, n = 6,7,8,9 or 10) (in case of n = 7, a mixture of 3,5-bis(4-heptyloxyphenyl)-1H-pyrazole and 3,5-bis(4-heptyloxyphenyl)-4H-pyrazole was detected) and bis(3,5-bis [4-(n-alkoxy) phenyl]-1H-pyrazole) silver(I) nitrate (where, n-alkoxy: O(CH₂)_nH, n = 6,7,8,9 or 10). The prepared compounds have been characterised and their structures were elucidated depending upon (FTIR, UV-Vis, ¹HNMR, ¹³CNMR, 2D ¹H-¹H-COSY, 2D ¹H-¹³C-HSQC and mass spectra) in addition to molar conductivity measurements for silver(I) complexes. The mesomorphism behaviour of the prepared compounds was studied using polarised light optical microscopy and confirmed with differential scanning calorimetry and X-ray powder diffraction techniques. The studies showed that among all of these compounds only the pyrazole derivatives are liquid crystal materials. The luminescent properties of all the prepared compounds were also investigated which confirmed that all of these compounds are photo-luminescent in the crystalline solid state and in the mesophase.     

A commutativity theorem

LetR be an associative ring with identity which satisfies the identities(xy) ^k =(yx) ^k and(xy) ^l =(yx) ^l , wherek andl are relatively prime positive integers, depending onx andy. ThenR is commutative. Moreover, examples are given which show thatR need not be commutative if either of the above identities is dropped. This theorem is also true for groups. Presented by N. S. Mendelsohn.