Rhodathiaboranes with `anomalous' electron counts: synthesis, structure and reactivity

Analysis of the structures of 8,8-(PPh₃)₂-8,7-nido-RhSB₉H₁₀ and 9,9-(PPh₃)₂-9,7,8-nido-RhC₂B₈H₁₁ by RMS misfit calculations has confirmed that these rhodaheteroboranes possess nido 11-vertex cluster geometries in apparent contravention of Wade's rules. However, examination of the molecular structures of both species shows that the {RhP₂} planes are inclined by ca. 66° with respect to the metal-bonded SB₃ or CB₃ faces, and that two weak ortho-CHRh agostic interactions occupy the vacant co-ordination position thereby created. As a consequence of these agostic bonds the Rh atom, and hence the overall cluster, is provided with an additional electron pair, meaning that their nido structures are now fully consistent with Wade's rules. The chelated diphosphine compound 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ is similar to the PPh₃ compound in showing the same agostic bonding. Attempts to prepare a bis-P(OMe)₃ analogue result in ligand scavenging and the formation of 8,8,8-{P(OMe)₃}₃-8,7-nido-RhSB₉H₁₀. Similarly, reaction between Cs[6-arachno-SB₉H₁₂] and RhCl(dmpe)CO does not result in CO loss but in formation of 8,8-(dmpe)-8-(CO)-8,7-nido-RhSB₉H₁₀, shown to exist as a mixture of two of three possible rotamers. Deprotonation of 8,8-(PPh₃)₂-8,7-nido-RhSB₉H₁₀ and 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ with MeLi yields the anions [1,1-(PPh₃)₂-1,2-closo-RhSB₉H₉]⁻ and [1,1-dppe-1,2-closo-RhSB₉H₉]⁻, respectively, with octadecahedral cage structures. It is argued that anion formation causes the agostic bonding to be `switched-off' and results in the cluster adopting the closo architecture predicted by Wade's rules. This structural change is fully reversible on reprotonation, and if reprotonation of [1,1-(dppe)-1,2-closo-RhSB₉H₉]⁻ is carried out in MeCN, the product 8,8-(dppe)-8-(MeCN)-8,7-nido-RhSB₉H₁₀ forms. Interestingly, 8,8-(dppe)-8-(MeCN)-8,7-nido-RhSB₉H₁₀ reconverts to 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ on standing in CDCl₃, suggesting that the agostic bonding is sufficiently strong to displace co-ordinated MeCN. All new compounds are fully characterised by multinuclear NMR spectroscopy and, in many cases, by single crystal X-ray diffraction.     

Evaluation of the accuracy of the determination of lead isotope ratios in wine by ICP MS using quadrupole, multicollector magnetic sector and time-of-flight analyzers

Different mass analysers [(quadrupole (Q), time-of-flight (TOF) and multicollector (MC) sector-field (SF)] of ions produced in an inductively coupled plasma were evaluated for the determination of lead isotope ratios in wine samples. A population of 20 wines of different origin including two reference wines from the EC Standards, Measurement and Testing Programme with concentrations varying between 7-140 mug Pb l(-1) was investigated. Wines were analyzed directly by Q ICP MS and MC ICP MS. The poor sensitivity of the TOF instrument, further aggravated by matrix signal suppression, did not allow the acquisition of data for wine samples that contained less than 50 mug l(-1) in the direct sample introduction mode. The separation and preconcentration of lead were therefore required. The precision obtained for the (206)Pb/(207)Pb and (208)Pb/(206)Pb were similar and equal to 0.14-2.7% for Q ICP MS, 0.04-0.17% for TOF ICP MS and 0.01-0.12% for MC ICP MS. The precision for (206)Pb/(204)Pb was 0.44-5.29, 0.15-1.7, 0.08-1.6%, respectively. On the level of accuracy, the data from TOF ICP MS and MC ICP MS were in good agreement. The accuracy of Q ICP MS data was judged satisfactory in comparison with the other techniques but their poor precision was a significant obstacle on the way of using these data for the determination of the geographic origin of wine.     

Speciation of organotin in environmental sediment samples

An optimized sample preparation procedure for organotin speciation in sediment samples has been applied to the analysis of sediments collected in the environment. The method is based on tropolone complexation of the ionic organotins, followed by extraction into a hexane-ethylacetate mixture and derivatization by NaBEt(4). The method was applied to the determination of organotin in various harbour, shipyard and dry-dock sediments in Belgium. Butyltin compounds were detected in all samples analyzed, often at high mg kg(-1) levels. A limited number of samples showed the presence of phenyltin compounds. Further, the method was adapted to the analysis of river sediments sampled from the vicinity of shipyards. Butyltin concentrations were detected at the microg kg(-1) level in the majority of samples.     

Evaluation of a purge-and-trap injection system for capillary gas chromatography-microwave induced plasma-atomic emission spectrometry for the determination of volatile selenium compounds in water

A method is presented for the selective determination of the volatile selenium species dimethylselenide and dimethyldiselenide, using a commercially available purge-and-trap injection system coupled to capillary gas chromatography-microwave induced plasma-atomic emission spectrometry. The efficiency of the purging step was evaluated and the parameters affecting the purge and trap processes were optimized. The method was applied to the determination of volatile selenium compounds in lake water. Relative detection limits of 2ng/l for dimethylselenide and dimethyldiselenide, corresponding to an absolute detection limit of 10 pg, were achieved.     

Tube-excited energy-dispersive X-ray fluorescence analysis. II. Energy-dispersive X-ray fluorescence analysis of air particulate material.

The use of monoenergetic exciting radiation of molybdenum obtained with a secondary target set-up, a conventional water-cooled tungsten anode x-ray tube and a Si(Li) semiconductor detector permits many trace and minor constituents from chlorine to strontium to be determined in particulate material collected on cellulose filters. The method is rapid and economical compared to other multielement techniques. The use of one or more single-element thin-film standards to calibrate for the analysis of many elements appears to be possible, but some systematic errors must be prevented. Absorption of the fluorescent radiation is remedied by a simple correction method. The precision and the accuracy of the method were critically examined by independent analysis of a number of samples with instrumental neutron activation analysis and by interlaboratory comparisons on the same samples.     

Preparation of polysiloxane stationary phases for capillary column chromatography: A New methoxyphenyl phase

Contemporary methods for the synthesis of alkyl- and arylsubstituted polysiloxane stationary phases are reviewed. A new, moderately polar phase containing the 3-(4-methoxyphenyl)-propyl group is reported.     

Determination of niobium in zirconium-niobium alloys

A rapid control determination of niobium in 50% zirconium/50% niobium master-alloy is described; it is a direct spectrophotometric procedure, based on the reaction of niobium ions with hydrogen peroxide in concentrated sulphuric acid. The procedure is suitable for the examination of zirconium alloys containing niobium in the range 0.1 to about 60%. At least 1% of chromium, cobalt, copper, manganese, nickel or tantalum, does not interfere. Interference due to optical absorption by the peroxy-complexes of titanium, tungsten, molybdenum and vanadium is not significant in the determination of niobium above about 1%, provided that these metals are not in excess of about 0.5%, 0.25%, 0.1% and 0.02%, respectively. To compensate for optical absorption due to iron(III), a solution of the sample, not treated with peroxide, is used.     

Chemiluminescence of CaH and AIH in the reaction of the metal atoms and formaldehyde

Chemiluminescence from the reaction of calcium and aluminum with various hydrogen containing compounds in a flowing gas system and in a heat pipe oven are described. Red chemiluminescence of CaH was observed in the reaction of calcium, and weak chemiluminescence of AlH was seen in the reaction of aluminum with formaldehyde (H₂CO). It is proposed that a reaction between metal atoms and formaldehyde may be used as a source of diatomic metallic hydrides.     

Comparison of experimental and calculated relative sensitivity coefficients for spark-source mass-spectrometry of metals

Sensitivity calibration has been performed for the spark-source mass-spectrometric analysis of iron, copper and aluminium matrices, with standard reference materials. The experimental relative sensitivity coefficients, corrected for discrimination effects in the mass spectrometer, are compared with values obtained with various empirical approaches to calculate relative sensitivity coefficients for an r.f. spark. The best correlation found is only of the order of 50%.     

Targeting cell surface receptors with ligand-conjugated nanocrystals

To explore the potential for use of ligand-conjugated nanocrystals to target cell surface receptors, ion channels, and transporters, we explored the ability of serotonin-labeled CdSe nanocrystals (SNACs) to interact with antidepressant-sensitive, human and Drosophila serotonin transporters (hSERT, dSERT) expressed in HeLa and HEK-293 cells. Unlike unconjugated nanocrystals, SNACs were found to dose-dependently inhibit transport of radiolabeled serotonin by hSERT and dSERT, with an estimated half-maximal activity (EC(50)) of 33 (dSERT) and 99 microM (hSERT). When serotonin was conjugated to the nanocrystal through a linker arm (LSNACs), the EC(50) for hSERT was determined to be 115 microM. Electrophysiology measurements indicated that LSNACs did not elicit currents from the serotonin-3 (5HT(3)) receptor but did produce currents when exposed to the transporter, which are similar to those elicited by antagonists. Moreover, fluorescent LSNACs were found to label SERT-transfected cells but did not label either nontransfected cells or transfected cells coincubated with the high-affinity SERT antagonist paroxetine. These findings support further consideration of ligand-conjugated nanocrystals as versatile probes of membrane proteins in living cells.