Simultaneous determination of nitrite and nitrate in human plasma by on-capillary preconcentration with field-amplified sample stacking

A simple method for the determination of nitrite and nitrate in human plasma has been developed using CZE with minimal sample preparation. Field‐amplified sample stacking (FASS) was used to achieve submicromolar detection by dilution of the plasma sample with deionized water. In CZE, the separation of nitrite and nitrate was achieved within 10 min without adding EOF modifier. The optimal condition was achieved with 50 mM phosphate buffer at pH 9.3. The ninefold diluted plasma samples were injected hydrodynamically for 40 s into a 60 cm×75 μm id uncoated fused‐silica capillary. The separation voltage was 20 kV (negative potential) and UV detection was performed at 214 nm. The linearity curves for nitrite and nitrate were obtained by the standard addition method. The estimated LODs for nitrite and nitrate in ninefold diluted plasma sample were 0.05 and 0.07 μM, respectively. The LODs for nitrite and nitrate in original plasma samples were 0.45 and 0.63 μM. The intra‐ and inter‐day precisions for both analytes were <2.6% and the recovery ranged between 92.3 and 113.3%. It was found that nitrite was more stable than nitrate in the plasma after the sample preparation. This proposed method was applied to a number of human plasma samples and the measured nitrite and nitrate concentrations in human plasma were consistent with the literature ranges.     

Coordination versatility of tridentate pyridyl aroylhydrazones towards iron: tracking down the elusive aroylhydrazono-based ferric spin-crossover molecular materials

The two potentially tridentate and monoprotic Schiff bases acetylpyridine benzoylhydrazone (HL(1)) and acetylpyridine 4-tert-butylbenzoylhydrazone (HL(2)) demonstrate remarkable coordination versatility towards iron on account of their propensity to undergo tautomeric transformations as imposed by the metal centre. Each of the pyridyl aroylhydrazone ligands complexes with the ferrous or ferric ion under strictly controlled reaction conditions to afford three six-coordinate mononuclear compounds [Fe(II)(HL)(2)](ClO(4))(2), [Fe(II)L(2)] and [Fe(III)L(2)]ClO(4) (HL = HL(1) or HL(2)) displaying distinct colours congruent with their intense CT visible absorptions. The synthetic manoeuvres rely crucially on the stoichiometry of the reactants, the basicities of the reaction mixtures and the choice of solvent. Electrochemically, each of these iron compounds exhibits a reversible metal-centred redox process. By all appearances, [Fe(III)(L(1))(2)]ClO(4) is one of only two examples of a crystallographically elucidated iron(III) bis-chelate compound of a pyridyl aroylhydrazone. Several pertinent physical measurements have established that each of the Schiff bases stabilises multiple spin states of iron; the enolate form of these ligands exhibits greater field strength than does the corresponding neutral keto tautomer. To the best of our knowledge, [Fe(III)(L(1))(2)]ClO(4) and [Fe(III)(L(2))(2)]ClO(4) are the first examples of ferric spin crossovers of aroylhydrazones. Whereas in the former the spin crossover (SCO) is an intricate gradual process, in the latter the (6)A(1)?(2)T(2) transition curve is sigmoidal with T(?)～280 K and the SCO is virtually complete. As regards [Fe(III)(L(1))(2)]ClO(4), M?ssbauer and EPR spectroscopic techniques have revealed remarkable dependence of the spin transition on sample type and extent of solvation. In frozen MeOH solution at liquid nitrogen temperature, both iron(III) compounds exist wholly in the doublet ground state.     

Fast quality assessment of German chamomile (Matricaria chamomilla L.) by headspace solid-phase microextraction: influence of flower development stage

For an adequate quality evaluation of aromatic plants grown under different conditions, a rapid, simple and sensitive method for the analysis of volatile constituents is indispensable. The main objective of the present study was to compare fast screening of German chamomile (Matricaria chamomilla L.) by means of headspace solid-phase microextraction (HS-SPME) with conventional isolation of the essential oil (steam distillation-solvent extraction (SDSE)) for the differentiation of chamomile essential oil constituents. Flowers were harvested at two distinct development stages: stage I, when ligulate flowers start to develop and tubular flowers are still closed, and stage II, when tubular flowers are partially to completely opened. Dried chamomile flowers at two development stages were extracted by means of both SDSE and HS-SPME, followed by GC-MS analysis. Among 30 compounds detected, (E)-beta-farnesene (49%), artemisia ketone (10%) and germacrene D (9%) were the predominant volatile components in the HS-SPME-extract, while alpha-bisabolol oxide A (42%), chamazulene (21%) and (Z)-spiroether (8%) were the main essential oil constituents among the 13 compounds obtained by SDSE. After statistical analysis of the data, both techniques enabled the same conclusion: (E)-beta-farnesene was the only compound which showed significant differences between the two flower development stages. These results suggest that HS-SPME-GC-MS can be used as a sensitive technique for the rapid screening and quality assessment of M. chamomilla.     

Surface-controlled spatially heterogeneous physical properties of a supramolecular gel with homogeneous chemical composition

Controlling supramolecular self-assembly across multiple length scales to prepare gels with localised properties is challenging. Most strategies concentrate on fabricating gels with heterogeneous components, where localised properties are generated by the stimuli-responsive component. Here, as an alternative approach, we use a spiropyran-modified surface that can be patterned with light. We show that light-induced differences in surface chemistry can direct the bulk assembly of a low molecular weight gelator, 2-NapAV, meaning that mechanical gel properties can be controlled by the surface on which the gel is grown. Using grazing incidence X-ray diffraction and grazing incidence small angle X-ray scattering, we demonstrate that the origin of the different gel properties relates to differences in the architectures of the gels. This provides a new method to prepare a single domain (i.e., chemically homogeneous) hydrogel with locally controlled (i.e., mechanically heterogeneous) properties.

A mechanical pattern is created in a hydrogel film by pre-patterning the underlying surface chemistry. This allows spatial variation of the viscous component of the gel, controlling dissipative forces in the gel film without altering gel chemistry.     

Development and Validation of a High Performance Liquid Chromatographic Method for the Determination of Voriconazole Content in Tablets

This paper describes the validation of an isocratic HPLC method for the assay of voriconazole in tablets. The method employs a Merck LiChrospher^? 100 RP-8 (125 × 4.6 mm I.D., 5 μm particle size) column, with a mobile phase of methanol : triethylamine solutions 0.6 %, pH 6.0 (50:50, v/v) and UV detection at 255 nm. A linear response (r > 0.9999) was observed in the range of 20.0–100.0 μg mL⁻¹. The method showed good recoveries (average 100.4%) and the relative standard deviation intra and inter-day were ≤ 1.0 %. Validation parameters as specificity and robustness were also determined. The method can be used for both quality control assay of voriconazole in tablets and for stability studies as the method separates voriconazole from its degradation products and tablet excipients.     

New rhenium-tin cluster adds palladium phosphine groups across Re-Sn bonds

The new rhenium-tin complex Re2(CO)8(mu-SnPh2)2, 1 was obtained in 52% yield from the reaction of Re2(CO)8(mu-H)[mu-C(H)C(H)Bu] with Ph3SnH. Compound 1 contains two SnPh2 groups bridging a long Re-Re single bond, Re-Re = 3.1971(4) A [3.1902(4) A], Re-Sn = 2.7429(4) A [2.7445(4) A], and 2.7675(4) [2.7682(5) A]. A bis-Pd(PBut3) adduct of 1, Pd2Re2(CO)8(mu-SnPh2)2(PBut3)2, 2 was obtained from the reaction of 1 with Pd(PBut3)2. Compound 2 contains Pd(PBut3) groups bridging two of its four Re-Sn bonds. The Re-Re bond and the unbridged Re-Sn bonds in 2 are significantly longer than those in 1, 3.245(1) A and 2.8167(14) A, respectively. Fenske-Hall molecular orbital calculations on 1 and 2 have been performed to explain the metal-metal bonding in these unusual mixed-metal polynuclear metal complexes.