Binding Energies of Proton-Bound Dimers of Imidazole and n-Acetylalanine Methyl Ester Obtained by Blackbody Infrared Radiative Dissociation

The dissociation kinetics of protonated n-acetyl-L-alanine methyl ester dimer (AcAlaME(d)), imidazole dimer, and their cross dimer were measured using blackbody infrared radiative dissociation (BIRD). Master equation modeling of these data was used to extract threshold dissociation energies (E(o)) for the dimers. Values of 1.18 +/- 0.06, 1.11 +/- 0.04, and 1.12 +/- 0.08 eV were obtained for AcAlaME(d), imidazole dimer, and the cross dimer, respectively. Assuming that the reverse activation barrier for dissociation of the ion-molecule complex is negligible, the value of E(o) can be compared to the dissociation enthalpy (DeltaH(d) degrees ) from HPMS data. The E(o) values obtained for the imidazole dimer and the cross dimer are in agreement with HPMS values; the value for AcAlaME(d) is somewhat lower. Radiative rate constants used in the master equation modeling were determined using transition dipole moments calculated at the semiempirical (AM1) level for all dimers and compared to ab initio (RHF/3-21G*) calculations where possible. To reproduce the experimentally measured dissociation rates using master equation modeling, it was necessary to multiply semiempirical transition dipole moments by a factor between 2 and 3. Values for transition dipole moments from the ab initio calculations could be used for two of the dimers but appear to be too low for AcAlaME(d). These results demonstrate that BIRD, in combination with master equation modeling, can be used to determine threshold dissociation energies for intermediate size ions that are in neither the truncated Boltzmann nor the rapid energy exchange limit.     

EVALUATION OF NEW BENZOPORPHYRIN DERIVATIVES WITH ENHANCED PDT EFFICACY*

Abstract— A first report on the biological evaluation of a series of isomerically pure benzoporphyrin derivatives ( cis- and frarcs-isomers) as methyl esters is described. In preliminary in vivo studies, the n- bexyl ether analogues of both cis- and trans -isomers of benzoporphyrin derivatives were found to be more active than the industrially prepared benzoporphyrin derivative, a mixture of monocarboxylic acids (BPDMA, Quadralogic Technologies, Vancouver). Further studies with 4-de-vinyl-4-(I-hexyloxyethyl) benzoporphyrin derivative showed that, like BPDMA, it had reduced residual skin phototoxicity compared in mice with Photofrin®. The uptake and clearance characteristics of BPDMA were also compared with the 4-(1-hexyloxyethyl)-derivative by in vivo reflection spectroscopy.     

Extraction with long-chain amines-II Extraction and colorimetric determination of chromate

Highly selective extraction of chromate from slightly acidic solutions (0.1-0.2M sulphuric acid) with a chloroform solution of trioctylamine (Alamine 336-S) or trioctylmethylammonium chloride Aliquat 336-S) is described. Many metals such as iron, nickel, cobalt, copper, alluminium, zinc, are not extracted, even if present in large concentrations. Coextraction of vanadium(V) and uranium(VI) is prevented by addition of sodium chloride. Traces of extracted molybdenum are scrubbed with ammonium oxalate. Final determination of chromium is based on measurement of the absorbance of the extract at 445-450 nm.     

EFFECTS OF INTENSITY AND FLUENCE UPON DNA SINGLE-STRAND BREAKS INDUCED BY EXCIMER LASER RADIATION

Abstract— A Xenon-chloride excimer laser emitting energy at 308 nm was used to induce single-strand breaks (SSBs, frank breaks plus alkali-labile lesions as assayed by alkaline sucrose sedimentation techniques) in purified DNA from Bacillus subtilis . A fluence response study and a peak pulse intensity study were performed. At a pulse energy of 0.1 mJ/pulse, the radiation induced SSBs in a linear fashion (91 SSB/10⁸ Da per MJ/m²) to a maximum exprimental fluence of 1.28 MJ/m². The pulse intensity study showed that there were no significant changes in DNA breakage (105 SSB/10⁸ Da) between 2.93 times 10⁹ and 5.86 times 10¹¹ W/m² (0.11 and 22.0 mJ/pulse) at a constant total fluence of 1.1 MJ/m² (27000 mJ dose). This study has verified and extended previous work by quantifying the yield of SSBs induced in DNA by this laser radiation.     

Photosensitized dehydrochlorination of poly(vinyl chloride). III. Reaction of thermally degraded poly(vinyl chloride) with hydrogen chloride

Films prepared from thermally degraded poly(vinyl chloride) were photolyzed in the presence of hydrogen chloride. When the light was filtered through a Pyrex disk, the absorbance in the region between 270 nm and about 415 nm decreased and reached a minimum value but the absorbance increased at wavelengths shorter than 270 nm and longer than 415 nm. Maximum bleaching occurred at a wavelength which depended on that of the irradiating light. When the Pyrex filter was omitted, an additional slower photodehydrochlorination reaction was superimposed on the photobleaching reaction. Photolysis of hexane or ethanol solutions of 1,8-diphenyloctatetra-1,3,5,7-ene and hydrogen chloride showed a similar reaction involving bleaching of the absorption of the polyene structure. The problems of using absorbance as an indication of the extent of the photodegradation of poly(vinyl chloride) are discussed.     

Some remarks concerning the M.I.T. public-key cryptosystem

Let a messageM be encrypted by raisingM to a powere moduloR, whereR ande are integers which are made public. The recipient of this encrypted form ofM can decipher it by raising the cipher text to a powerd moduloR. Only the recipient knows the values of the two large primesp ₁,p ₂ such thatR=p ₁ p ₂; consequently, only he knowsd, ase is preselected such that (e, (p ₁ – 1)(p ₂ – 1))=1 anded 1 (mod (p ₁ – 1)(p ₂ – 1)).Recently several attacks have been made on the proposed security of this cryptosystem under iteration of the encryption procedure. In this paper we discuss methods of selecting the primesp ₁,p ₂ and the encryption exponente such that the possibility of breaking this cryptosystem by using an iteration procedure is minimized. Several numerical results are also presented.     

Epilobium angustifolium L. as a Potential Herbal Component of Topical Products for Skin Care and Treatment—A Review

Epilobium angustifolium L. (EA) has been used as a topical agent since ancient times. There has been an increasing interest in applying EA as a raw material used topically in recent years. However, in the literature, there are not many reports on the comprehensive application of this plant to skin care and treatment. EA contains many valuable secondary metabolites, which determine antioxidant, anti-inflammatory, anti-aging, and antiproliferative activity effects. One of the most important active compounds found in EA is oenothein B (OeB), which increases the level of ROS and protects cells from oxidative damage. OeB also influences wound healing and reduces inflammation by strongly inhibiting hyaluronidase enzymes and inhibiting COX-1 and COX-2 cyclooxygenases. Other compounds that play a key role in the context of application to the skin are flavonoids, which inhibit collagenase and hyaluronidase enzymes, showing anti-aging and anti-inflammatory properties. While terpenes in EA play an important role in fighting bacterial skin infections, causing, among other things cell membrane, permeability increase as well as the modification of the lipid profiles and the alteration of the adhesion of the pathogen to the animal cells. The available scientific information on the biological potential of natural compounds can be the basis for the wider use of EA in skin care and treatment. The aim of the article is to review the existing literature on the dermocosmetic use of E. angustifolium.     

Supernovae and the Arrow of Time

Supernovae are explosions of stars and are a central problem in astrophysics. Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities develop during the star’s explosion and lead to intense interfacial RT/RM mixing of the star materials. We handle the mathematical challenges of the RT/RM problem based on the group theory approach. We directly link the conservation laws governing RT/RM dynamics to the symmetry-based momentum model, derive the model parameters, and find the analytical solutions and characteristics of RT/RM dynamics with variable accelerations in the linear, nonlinear and mixing regimes. The theory outcomes explain the astrophysical observations and yield the design of laboratory experiments. They suggest that supernova evolution is a non-equilibrium process directed by the arrow of time.     

Effects of laser irradiation on optical properties of a-Se100−x Te x thin films

The effect of laser irradiation on the optical properties of thermally evaporated Se_100?x Te _x (x=8, 12, 16) chalcogenide thin films has been studied. The result shows that the irradiation causes a shift in the optical gap. The results have been analyzed on the basis of laser irradiation-induced defects in the film. The width of the tail of localized state in the band gap has been evaluated using the Urbach edge method. As the irradiation time increases, the values of the optical energy gap for all compositions decrease, while tail energy width increases. It is also observed that the optical energy gap decreases with increasing Te content in the alloy. These changes are a consequence of an increment in disorder produced by laser irradiation in the amorphous structure of thin film.     

A phenomenological model for hydrocarbon high-temperature autoignition

A four-step phenomenological chemical–kinetic model is presented that is believed to apply to many aspects of combustion of most hydrocarbons at temperatures above about 1000 K. The mechanism involves chain initiation through reactive collision of fuel and oxidizer molecules, fuel consumption in a step that removes radicals, oxidizer consumption in a step that produces radicals and a chain termination step. An expression for the autoignition time is derived on the basis of this model and is applied to describe the ignition of propane–air mixtures and a few other hydrocarbons. It is shown that excellent agreement with ignition times obtained from detailed chemistry can be achieved by this model.