Competition between photodimerization and photocycloaddition of dimethyl 3-dehydrogibberellenate to ethylene, 1,1-dichloroethylene and trichloroethylene

Photocycloadditions of dimethyl 3-dehydrogibberellenate 1 to ethylene, 1,1-dichloroethylene and trich-loro-ethylene were investigated The results exhibited markedly the competition between photodimerization and photocycloaddition of 1, and showed that the yields of cycloaddition products increased with increasing polarity of the olefins. Strangely, photocycloaddition of 1 to olefins was found to proceed through the singlet excited state     

Electrically actuated, pressure-driven microfluidic pumps

In order to make the lab-on-a-chip concept a reality, it is desirable to have an integrated component capable of pumping fluids through microchannels. We have developed novel, electrically actuated micropumps and have integrated them with microfluidic systems. These devices utilize the build-up of electrolysis gases to achieve pressure-driven pumping, only require small voltages (approximately 10 V), and have approximate dimensions of 5 cm x 3 cm x 2 cm. Furthermore, these micropumps are composed of relatively inexpensive materials, and the reversible sealability of their poly(dimethylsiloxane) body to different microfluidic arrays enables repeated uses of the same pump. Under an applied potential of 10 V, three different micropumps had average flow rates of 8-13 microL min(-1) for water being pumped through five different 2 cm-long, 5500 microm(2) cross-sectional-area channels in poly(methyl methacrylate), in approximate agreement with predicted pump rates. We have also evaluated pump operation at the lower applied potential of 8 V and observed an average flow rate of 6.1 microL min(-1) for a pump-channel system. The current micropump design is capable of sustaining pumping pressures in the range of 300 kPa. The various advantages of these micropumps make them well suited for use in lab-on-a-chip analysis techniques.     

EVALUATION OF NEW BENZOPORPHYRIN DERIVATIVES WITH ENHANCED PDT EFFICACY*

Abstract— A first report on the biological evaluation of a series of isomerically pure benzoporphyrin derivatives ( cis- and frarcs-isomers) as methyl esters is described. In preliminary in vivo studies, the n- bexyl ether analogues of both cis- and trans -isomers of benzoporphyrin derivatives were found to be more active than the industrially prepared benzoporphyrin derivative, a mixture of monocarboxylic acids (BPDMA, Quadralogic Technologies, Vancouver). Further studies with 4-de-vinyl-4-(I-hexyloxyethyl) benzoporphyrin derivative showed that, like BPDMA, it had reduced residual skin phototoxicity compared in mice with Photofrin®. The uptake and clearance characteristics of BPDMA were also compared with the 4-(1-hexyloxyethyl)-derivative by in vivo reflection spectroscopy.     

Extraction with long-chain amines-II Extraction and colorimetric determination of chromate

Highly selective extraction of chromate from slightly acidic solutions (0.1-0.2M sulphuric acid) with a chloroform solution of trioctylamine (Alamine 336-S) or trioctylmethylammonium chloride Aliquat 336-S) is described. Many metals such as iron, nickel, cobalt, copper, alluminium, zinc, are not extracted, even if present in large concentrations. Coextraction of vanadium(V) and uranium(VI) is prevented by addition of sodium chloride. Traces of extracted molybdenum are scrubbed with ammonium oxalate. Final determination of chromium is based on measurement of the absorbance of the extract at 445-450 nm.     

Expedient parallel synthesis of 2-amino-4-heteroarylpyrimidines

[reaction: see text] An expedient synthesis of diverse 2-amino-4-heteroarylpyrimidines via a 2-chloropyrimidine intermediate is described. A series of potentially biologically active analogues have been synthesized in two parallel steps to afford focused arrays.     

Critical Points in a Crystal and Procrystal

The critical points in the model electron density distributions of LiF, NaF, NaCl, and MgO crystals, constructed from accurate X-ray diffraction data, are determined. For LiF and MgO they are compared with those obtained from a Hartree–Fock electron density calculation. Both experiment and theory show the same type of critical points on the bond lines. The topological features in areas between structural units, where the electron density is low and near-uniform, turn out to be model dependent and cannot be established well with the data available. Topological analysis of procrystals (hypothetical systems consisting of spherical atoms or ions placed on the same sites as atoms in real crystal) show that (3, –1) critical points, usually connected with bonding interaction, are observed on interatomic lines in these nonbonded systems as well.     

Anion radical [2 + 2] cycloaddition as a mechanistic probe: stoichiometry- and concentration-dependent partitioning of electron-transfer and alkylation pathways in the reaction of the Gilman reagent Me2CuLi.LiI with bis(enones)

Exposure of easily reduced aromatic bis(enones) 1a-1e to the methyl Gilman reagent Me(2)CuLi.LiI at 0 degrees C in tetrahydrofuran solvent provides the products of tandem conjugate addition-Michael cyclization, 2a-2e, along with the products of [2 + 2] cycloaddition, 3a-3e. Complete partitioning of the Gilman alkylation and [2 + 2] cycloaddition pathways may be achieved by adjusting the loading of the Gilman reagent, the rate of addition of the Gilman reagent, and the concentration of the reaction mixture. The Gilman alkylation manifold is favored by the rapid addition of excess Gilman reagent at higher substrate concentrations, while the [2 + 2] cycloaddition manifold is favored by slow addition of the same Gilman reagent at lower concentrations and loadings. Notably, [2 + 2] cycloaddition to form 3a-3e is catalytic in Gilman reagent. Kinetic data reveal that the ratio of 2a and 3a changes such that the cycloaddition pathway becomes dominant upon increased consumption of Gilman reagent. These data suggest a concentration-dependent speciation of the Gilman reagent and differential reactivity of the aggregates present at higher and lower concentrations. While the species present at higher concentration induce Gilman alkylation en route to products 2a-2e, the species present at lower concentration provide products of catalytic [2 + 2] cycloaddition, 3a-3e. Moreover, upon electrochemical reduction of the bis(enones) 1a-1e, or chemically induced single-electron transfer from arene anion radicals, the very same [2 + 2] cycloadducts 3a-3e are formed. The collective data suggest that [2 + 2] cycloadducts 3a-3e arising under Gilman conditions may be products of anion radical chain cyclobutanation that derive via electron transfer (ET) from the Me(2)CuLi.LiI aggregate(s) present at low concentration. These observations provide a link between the Gilman alkylation reaction and related ET chemistry and suggest these reaction paths are mechanistically distinct. This analysis is made possible by the recent observation that easily reduced bis(enones) are subject to intramolecular [2 + 2] cycloaddition upon cathodic reduction or chemically induced ET from arene anion radicals, and is herewith showcased as a novel method of testing for the intermediacy of enone anion radicals.     

Epilobium angustifolium L. as a Potential Herbal Component of Topical Products for Skin Care and Treatment—A Review

Epilobium angustifolium L. (EA) has been used as a topical agent since ancient times. There has been an increasing interest in applying EA as a raw material used topically in recent years. However, in the literature, there are not many reports on the comprehensive application of this plant to skin care and treatment. EA contains many valuable secondary metabolites, which determine antioxidant, anti-inflammatory, anti-aging, and antiproliferative activity effects. One of the most important active compounds found in EA is oenothein B (OeB), which increases the level of ROS and protects cells from oxidative damage. OeB also influences wound healing and reduces inflammation by strongly inhibiting hyaluronidase enzymes and inhibiting COX-1 and COX-2 cyclooxygenases. Other compounds that play a key role in the context of application to the skin are flavonoids, which inhibit collagenase and hyaluronidase enzymes, showing anti-aging and anti-inflammatory properties. While terpenes in EA play an important role in fighting bacterial skin infections, causing, among other things cell membrane, permeability increase as well as the modification of the lipid profiles and the alteration of the adhesion of the pathogen to the animal cells. The available scientific information on the biological potential of natural compounds can be the basis for the wider use of EA in skin care and treatment. The aim of the article is to review the existing literature on the dermocosmetic use of E. angustifolium.