Modeling solubilization of oil mixtures in anionic microemulsions II. Mixtures of polar and non-polar oils

Polar/amphiphilic oils, called lipophilic linkers, are sometimes added to oil-water-ionic surfactant microemulsions in order to increase the solubilization of hydrophobic oils. The solubilization increase has been well documented for a number of systems. However, mathematical models to calculate the solubilization increase have been proposed only for optimum microemulsions (i.e., middle phase microemulsions solubilizing equal volumes of oil and water). In this paper we propose a model, which predicts solubilization enhancement for non-optimum microemulsion systems as well. The model is an extension of the net-average curvature model of microemulsion. The net-average curvature model is combined with a surface activity model to account for the increased palisade layer solubilization due to the presence of the polar/amphiphilic oil component. New non-linear mixing rules are also incorporated to account for the optimum salinity and the characteristic length variation of the anionic surfactant microemulsion as a function of the lipophilic linker concentration. The model predicts the effect of the lipophilic linker and the electrolyte concentration on the oil solubilization in accordance with the experimental results.     

Measurement of the Bc+ meson lifetime using the decay mode Bc+ --> J/Psie+nue

We present a measurement of the Bc+ meson lifetime in the decay mode Bc+ --> J/Psie+nue using the Collider Detector at Fermilab II detector at the Fermilab Tevatron Collider. From a sample of about of 360 pb(-1) of pp collisions at square root of s = 1.96 TeV, we reconstruct J/Psie+ pairs with invariant mass in the kinematically allowed range 4< M(J/Psie) < 6 GeV/c2. A fit to the decay-length distribution of 238 signal events yields a measured Bc+ meson lifetime of 0.463(-0.065)(+0.073)(stat) +/- 0.036(syst) ps.     

Measurement of the tt production cross section in pp collisions at square root of s = 1.96 TeV

We present a measurement of the top quark pair production cross section in pp collisions at square root of s = 1.96 TeV using 318 pb(-1) of data collected with the Collider Detector at Fermilab. We select tt[over ] decays into the final states enu+jets and mu nu+ jets, in which at least one b quark from the t-quark decays is identified using a secondary vertex-finding algorithm. Assuming a top quark mass of 178 GeV/c2, we measure a cross section of 8.7 +/- 0.9(stat)(-0.9)+1.1(syst) pb. We also report the first observation of tt[over ] with significance greater than 5sigma in the subsample in which both b quarks are identified, corresponding to a cross section of 10.1(-1.4)+1.6(stat)(-1.3)+2.0(syst) pb.     

Search for a neutral Higgs boson decaying to a W boson pair in pp collisions at square root of s = 1.96 TeV

We present the results of a search for standard model Higgs boson production with decay to WW*, identified through the leptonic final states e+ e- nu nu,+/-mu -/+nu nu and mu+ mu- nu nu. This search uses 360 pb -1 of data collected from pp collisions at square root of s =1.96 TeV by the upgraded Collider Detector at Fermilab (CDF II). We observe no signal excess and set 95% confidence level upper limits on the production cross section times branching ratio for the Higgs boson to WW* or any new scalar particle with similar decay products. These upper limits range from 5.5 to 3.2 pb for Higgs boson masses between 120 and 200 GeV/c2.     

The Bishop–Phelps–Bollobás and approximate hyperplane series properties

We study the Bishop–Phelps–Bollobás property for operators between Banach spaces. Sufficient conditions are given for generalized direct sums of Banach spaces with respect to a uniformly monotone Banach sequence lattice to have the approximate hyperplane series property. This result implies that Bishop–Phelps–Bollobás theorem holds for operators from ${?}_1$ into such direct sums of Banach spaces. We also show that the direct sum of two spaces with the approximate hyperplane series property has such property whenever the norm of the direct sum is absolute.     

Rational use of substituted N-allyl and N,N-diallylanilines in the stereoselective synthesis of novel 2-alkenyltetrahydro-1-benzazepines

Two new series of 1,4-epoxy-2-exo-vinyl(isopropenyl)tetrahydro-1-benzazepines and cis-2-vinyl(isopropenyl)-4-hydroxytetrahydro-1-benzazepines were prepared by an efficient three/four-step route from available substituted N,N-diallylanilines and mono N-allylanilines. The amino-Claisen rearrangement and the sequential oxidation/intramolecular 1,3-dipolar cycloaddition reactions were used as the key steps in this synthesis. All the synthesized compounds were fully characterized by IR, GC-MS and NMR techniques.     

4‐Hydroxy‐2‐vinyl‐2,3,4,5‐tetrahydro‐1‐benzazepine and its 7‐fluoro and 7‐chloro analogues are isomorphous but not strictly isostructural

4‐Hydroxy‐2‐vinyl‐2,3,4,5‐tetrahydro‐1‐benzazepine, C₁₂H₁₅NO, (I), and its 7‐fluoro and 7‐chloro analogues, namely 7‐fluoro‐4‐hydroxy‐2‐vinyl‐2,3,4,5‐tetrahydro‐1‐benzazepine, C₁₂H₁₄FNO, (II), and 7‐chloro‐4‐hydroxy‐2‐vinyl‐2,3,4,5‐tetrahydro‐1‐benzazepine, C₁₂H₁₄ClNO, (III), are isomorphous, but with variations in the unit‐cell dimensions which preclude in compound (III) one of the weaker intermolecular interactions found in compounds (I) and (II). Thus the compounds are not strictly isostructural in terms of the structurally significant intermolecular interactions, although the corresponding atomic coordinates are very similar. The azepine rings adopt chair conformations. The molecules are linked by a combination of N—H...O and O—H...N hydrogen bonds into chains of edge‐fused R³₃(10) rings, which in compounds (I) and (II) are further linked into sheets by a single C—H...π(arene) hydrogen bond. The significance of this study lies in its observation of isomorphism in compounds (I)–(III), and its observation of a sufficient variation in one of the cell dimensions effectively to alter the range of significant hydrogen bonds present in the crystal structures.     

Synthesis of Alumina Gels in Amphiphilic Media

This work deals with the synthesis of alumina gels from aqueous solutions of aluminum chloride in the presence of cationic surfactant molecules. The effect on the sol-gel transition of the reagent concentrations and of the synthesis temperature are first studied. The structure of the resulting wet and dried gels and the formation of liquid crystal mesophases are studied by X-ray diffraction. The thermal and structural evolutions of the gels are then characterized by thermogravimetric and X-ray diffraction measurements. Finally, nitrogen adsorption isotherms are used to investigate the porous texture of the thermally treated materials up to the transformation into -Al₂O₃.     

Novel non-hydrolytic sol-gel route to metal oxides

Monolithic alumina and aluminosilicate gels have been prepared using a novel sol-gel process based on the non-hydrolytic condensation reaction between a metal halide and a metal alkoxide. XRD indicated that the alumina gel remained amorphous at 750°C; solid state ²⁷Al NMR indicated the presence in the dried gel and in the amorphous calcined sample of a large amount of pentacoordinated aluminum atoms. A study of the sol formation using liquid state ²⁷Al NMR suggested that the gel structure was reminiscent of the oligomeric structure of the chloroisopropoxide precursors. Differential thermal analysis and XRD indicated that the aluminosilicate gels were converted to mullite below 1000°C, suggesting a high degree of homogeneity in these precursors.     

Selective separation of copper with Lix 864 in a hollow fiber module

The transfer and separation of Cu(II), Co(II), Ni(II) and Zn(II) ions across a hollow fiber supported liquid membrane containing LIX 864 as the mobile carrier dissolved in kerosene solvent has been investigated. The flux and selectivity for copper has been studied as a function of the feed flow, the carrier concentration in the liquid membrane and the extraction solution acidity. A maximum copper recovery at 30% of LIX (v/v) in the diluent was obtained. The permeation experiments showed that at pH 2 in the extraction solution a highly selective separation of Cu over the other cations can be achieved. Increasing the acidity of the extraction solution copper selectivity decrease and the grade of recuperation sequence is Cu>Co>Ni>Zn. These results suggest that in selected situations, this membrane system can be competitive with the conventional liquid-liquid extraction process, in particular in leaching solutions with low metal concentration.