Optimization of acid hydrolysis of sugarcane bagasse and investigations on its fermentability for the production of xylitol by Candida guilliermondii

The dilute-acid hydrolysis of sugarcane bagasse was optimized using a statistical experimental design resulting in hydrolysates containing 57.25 g/L of xylose, which were fermented with a high inoculum concentration (10 g/L of the yeast Candida guilliermondii IM/UFRJ 50088). The addition of urea reduced the time of conversion (t _C) to 75 h (without nitrogen source addition t _C>127 h), and, consequently, improving the rates of xylitol bioproduction. Fermentator experiments, using the optimized conditions, resulted in enhanced conversion rates, reducing t _C to 30 h. The stability of the yeast in the hydrolysate was also verified in a 480-h cultivation.     

Natural and artificial radionuclides in soils from Paraná State,Brazil

Soil samples from Paraná State, Brazil, were collected in 1991 and compared with others collected at the same location in March 1977 and at the end of 1983. Pedological analyses were practiced on these samples and¹³⁷Cs and²³²Th,²²⁶Ra and⁴⁰K activities were determined by gammaray spectrometry. A latitude dependence of¹³⁷Cs was found as well. It was impossible to determine the¹³⁷Cs contribution from Chernobyl nuclear accident because of low fallout and intense leaching, erosion and re-suspension in soils of regions with high annual precipitation. Natural radionuclides did not show such effects.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Contrasting behavior in azide pyrolyses: an investigation of the thermal decompositions of methyl azidoformate, ethyl azidoformate and 2-azido-N, N-dimethylacetamide by ultraviolet photoelectron spectroscopy and matrix isolation infrared spectroscopy

The thermal decompositions of methyl azidoformate (N3COOMe), ethyl azidoformate (N3COOEt) and 2-azido-N,N-dimethylacetamide (N3CH2CONMe2) have been studied by matrix isolation infrared spectroscopy and real-time ultraviolet photoelectron spectroscopy. N2 appears as an initial pyrolysis product in all systems, and the principal interest lies in the fate of the accompanying organic fragment. For methyl azidoformate, four accompanying products were observed: HNCO, H2CO, CH2NH and CO2, and these are believed to arise as a result of two competing decomposition routes of a four-membered cyclic intermediate. Ethyl azidoformate pyrolysis yields four corresponding products: HNCO, MeCHO, MeCHNH and CO2, together with the five-membered-ring compound 2-oxazolidone. In contrast, the initial pyrolysis of 2-azido-N,N-dimethyl acetamide, yields the novel imine intermediate Me2NCOCH=NH, which subsequently decomposes into dimethyl formamide (HCONMe2), CO, Me2NH and HCN. This intermediate was detected by matrix isolation IR spectroscopy, and its identity confirmed both by a molecular orbital calculation of its IR spectrum, and by the temperature dependence and distribution of products in the PES and IR studies. Mechanisms are proposed for the formation and decomposition of all the products observed in these three systems, based on the experimental evidence and the results of supporting molecular orbital calculations.     

Latex Fractionation by Sedimentation and Colloidal Crystallization: The Case of Poly(styrene-co-acrylamide)

Poly(styrene-co-acrylamide) (PS-AAM) latex was prepared, fractionated by sedimentation under gravity, and characterized by PCS, infrared spectra, secondary and backscattered electron imaging in the scanning electron microscope, and electron spectroscopy imaging in an analytical transmission electron microscope. Three latex fractions were obtained. The lower fraction was opalescent and its particles were the more uniform, concerning size, chemical composition, and topochemical features. This lower fraction was still further fractionated by zonal centrifugation in a density gradient, yielding two fractions with similar macrocrystal-forming abilities but different sizes and chemical compositions. These results confirm those previously obtained for the PS-HEMA latex. Copyright 2000 Academic Press.     

Validation of UV spectrophotometric and nonaqueous titration methods for the determination of carvedilol in pharmaceutical formulations

Ultraviolet (UV) spectrophotometric and nonaqueous volumetric methods are described for the determination of carvedilol in pharmaceutical formulations. Linearity, precision, and accuracy were evaluated according to the validation guidelines of the International Conference on Harmonization and the United States Pharmacopeia for both methods. The UV spectrophotometric procedure was performed in ethanol at 244 nm. Good linearity was obtained between 2 and 7 microg/mL with a correlation coefficient of 0.9999. The intra- and interday precision values were <2% for all samples analyzed. The accuracy, determined from recovery studies, was between 97.5 and 102.2%. The other procedure was based on the volumetric quantitation of carvedilol in a nonaqueous medium with 0.01 M perchloric acid and 1% violet crystal as the indicator. The validation of the volumetric method yielded good results that included linearity (r of > 0.999), precision (relative standard deviations of <2% for intra- and interday precision), and accuracy (96.4-102.4%). The methods were applied to tablets and compounded capsules. Statistical analysis by analysis of variance showed no significant difference between the results obtained by the proposed methods.     

Antiedematogenic activity of two thiazolidine derivatives: N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene) rhodanine (GS26) and N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene)-2,4-thiazolidinedione (GS28)

The search for new anti-inflammatory drugs has been constant in several research centers. The use of the Bioisostery concept allows the elaboration of new bioactive compounds with different properties through the introduction of substitute groups in one or more positions of a main molecule with known biological activity. Preliminary works accomplished at our laboratory with 2,4-thiazolidinedione isosters demonstrated inhibitory activity on edema formation for N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene)-2,4-thiazolidinedione (GS28) and N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene) rhodanine (GS26). We verified the antiedematogenic and ulcerogenic activity of these two compounds in Wistar rats. The carrageenan induced paw edema suffered significant (p<0.05) inhibition (28.36% on average) for GS28 (100 mg/kg; v.o.) during the entire time of the experiment. GS26 (50 and 100 mg/kg; v.o.) significantly inhibited (p<0.05) the paw edema dextran induced (22.1 and 27.8%, for the respective doses) after 180 min. The compounds GS26 and GS28 did not show ulcerogenic activity on gastric mucous. The results suggest antiedematogenic action for both compounds without the appearance of gastric lesions.     

Mapping the binding site topology of amyloid protein aggregates using multivalent ligands

A key process in the development of neurodegenerative diseases such as Alzheimer''s and Parkinson''s diseases is the aggregation of proteins to produce fibrillary aggregates with a cross β-sheet structure, amyloid. The development of reagents that can bind these aggregates with high affinity and selectivity has potential for early disease diagnosis. By linking two benzothiazole aniline (BTA) head groups with different length polyethylene glycol (PEG) spacers, fluorescent probes that bind amyloid fibrils with low nanomolar affinity have been obtained. Dissociation constants measured for interaction with Aβ, α-synuclein and tau fibrils show that the length of the linker determines binding affinity and selectivity. These compounds were successfully used to image α-synuclein aggregates in vitro and in the post-mortem brain tissue of patients with Parkinson''s disease. The results demonstrate that multivalent ligands offer a powerful approach to obtain high affinity, selective reagents to bind the fibrillary aggregates that form in neurodegenerative disease.

Multivalent ligands offer a powerful approach to obtain high affinity reagents to bind the aggregates that form in neurodegenerative disease. Selectivity for different proteins was achieved by using different linkers to connect the head groups.     

Determination of manganese in ores by activation analysis using a californium-252 neutron source

A²⁵²Cf neutron source has been used to analyse manganese in ores such as pyrolusite, rodonite (manganese silicate) and blends used in dry-batteries. Samples with about 150 mg and standards of manganese dioxide were irradiated for about 20 min and counted using a well-type NaI(Tl) scintillation counter and scaler, with or without pulse-height discriminator between the detector and the scaler. The interferences of nuclear reactions⁵⁶Fe(n,p)⁵⁶Mn and⁵⁹Co(n,α)⁵⁶Mn were studied, as well as problems in connection with neutron shadowing during irradiation, gamma-rays attenuation during counting and influence of granulometry of samples. Some of the samples were also analysed by wet-chemical method (sodium bismuthate) in order to compare results.