Biomethane Production in an AnSBBR Treating Wastewater from Biohydrogen Process

An anaerobic sequencing batch reactor containing immobilized biomass (AnSBBR) was used to produce biomethane by treating the effluent from another AnSBBR used to produce biohydrogen from glucose- (AR-EPHG) and sucrose-based (AR-EPHS) wastewater. In addition, biomethane was also produced from sucrose-based synthetic wastewater (AR-S) in a single AnSBBR to compare the performance of biomethane production in two steps (acidogenic and methanogenic) in relation to a one-step operation. The system was operated at 30 °C and at a fixed stirring rate of 300 rpm. For AR-EPHS treatment, concentrations were 1,000, 2,000, 3,000, and 4,000 mg chemical oxygen demand?(COD)?L^?1 and cycle lengths were 6 and 8 h. The applied volumetric organic loads were 2.15, 4.74, 5.44, and 8.22 g COD L^?1 day^?1. For AR-EPHG treatment, concentration of 4,000 mg COD L^?1 and 4-h cycle length (7.21 g COD L^?1 day^?1) were used. For AR-S treatment, concentration was 4,000 mg COD L^?1 day^?1 and cycle lengths were 8 (7.04 g COD L^?1 day^?1) and 12 h (4.76 g COD L^?1 day^?1). The condition of 8.22 g COD L^?1 day^?1 (AR-EPHS) showed the best performance with respect to the following parameters: applied volumetric organic load of 7.56 g COD L^?1 day^?1, yield between produced methane and removed organic material of 0.016 mol CH₄?g COD^?1, CH₄ content in the produced biogas of 85 %, and molar methane productivity of 127.9 mol CH₄?m^?3 day^?1. In addition, a kinetic study of the process confirmed the trend that, depending on the biodegradability characteristics of the wastewaters used, the two-step treatment (acidogenic for biohydrogen production and methanogenic for biomethane production) has potential advantages over the single-step process.     

Mullite crystallization using fully hydrolyzed silica sol: the gelation temperature influence

Mullite is an aluminosilicate widely used as a structural material for high temperature applications. This paper studies the effect of the gelation temperature on the synthesis of two mullite precursors: polymeric and colloidal silica, using both in fully-hydrolyzed silica sol, derived from sodium silicate. The gels were synthesized using aqueous silicic acid and aluminum nitrate. Ethylene glycol was added into polymeric gels. Two gelation temperatures were used: 80 and 100 °C. In the polymeric precursor, the increasing of the gelation temperature caused an increase in the silica incorporation inside the mullite crystalline lattice at 1,000 °C, and it also generated an increase in the reaction extent at all calcination temperatures. In the colloidal precursors, these effects were more intense than in the polymeric precursors in terms of yield. Colloidal samples calcined at 1,250 °C crystallized cristobalite and alpha alumina in addition to mullite when they were previously gelled at 80 °C. On the other hand, the same sample gelled at 100 °C led to only crystallized mullite. The reaction extent increased by more than 20 % for colloidal samples gelled at 100 °C compared to colloidal samples gelled at 80 °C (calcined at 1,250 °C). This increase was due to the almost total incorporation of alumina and silica in the crystalline lattice of mullite.     

Theoretical and Experimental Analysis of Protoporphyrin IX Photodegradation Using Multi-Wavelength Light Sources

Photodynamic procedures have been used in many applications, ranging from cancer treatment to microorganism inactivation. Photodynamic reactions start with the activation of a photosensitizing molecule with light, leading to the production of cytotoxic molecules that promote cell death. However, establishing the correct light and photosensitizer dosimetry for a broadband light source remains challenging. In this study, we proposed a theoretical mathematical model for the photodegradation of protoporphyrin IX (PpIX), when irradiated by multi-wavelength light sources. The theoretical model predicts the experimental photobleaching (temporal change in PpIX concentration) of PpIX for different light sources. We showed that photobleaching occurs independently of the light source wavelengths but instead depends only on the number of absorbed photons. The model presented here can be used as an important mathematical approach to better understand current photodynamic therapy protocols and help achieve optimization of the doses delivered.     

A comparative multi-reference configuration interaction study of the low-lying states of two thione isomers of thiophenol

Multi-reference configuration interaction, MR-CI (including extensivity corrections, named +Q), calculations were performed on the S₀–S₃ states of cyclohexa-2,4-diene-1-thione (thione 24 ) and cyclohexa-2,5-diene-1-thione (thione 25 ), which are thione isomers of thiophenol. Several types of uncontracted MR-CIS and MR-CISD wavefunctions were employed, comprising MR-CI expansions as large as ~365 × 10⁶ configuration state functions. The nature of the studied excited states was characterized. Vertical excitation energies (ΔE) and oscillator strengths (f) were computed. The most intense transitions (S₀ → S₂ for 24 and S₀ → S₃ for 25 ) did not change with the wavefunction, although a variation as large as ~1 eV was obtained for the S₃ state of 24 , at the highest (MR-CI+Q) level. On the other hand, ΔE changed at most by ~0.56 eV for 25 as the wavefunction changes, at the same level. The S₁ state of both thiones was found to have nπ* character and is in the visible region. For 24 , S₂ and S₃ are ππ* and nπ* states, respectively, while for 25 the reverse order is obtained. S₂ and S₃ are in the range ~3.5 to 5.2 eV, again at the highest level. It is the first time that the excited states of the title molecules are studied. The computed results agree with the experimental onset of photoreactions of thiones 24 and 25 found by Reva et al (Phys. Chem. Chem. Phys., 2015 , 17, 4888).     

Contribution of CuxO distribution,shape and ratio on TiO2 nanotubes to improve methanol production from CO2 photoelectroreduction

Many studies are focused on the development of materials for converting carbon dioxide into multicarbon oxygenates such as methanol and ethanol, because of their higher energy density and wider applicability. In this work, TiO₂ nanotubes (NT/TiO₂) were modified with Cu_xO nanoparticles in order to investigate the contribution of different ratio of Cu₂O/CuO and its distribution over NT/TiO₂ for CO₂ photoelectro-conversion to methanol. The photoelectrodes were built by anodization process to obtain NT/TiO₂ layer, and the decoration with Cu_xO hybrid system was carried out by electrodeposition process, using Na₂SO₄ or acid lactic as electrolyte, followed by annealing at different temperatures. X-ray photoelectron spectroscopy analysis revealed the predominance of Cu⁺¹ and Cu⁺² at 150 °C and 300 °C, respectively. X-ray diffraction and scanning electron microscopy indicated that under lactic acid solution, the oxide nanoparticles exhibited small size, cubic shape, and uniform distribution on the nanotube wall. While under Na₂SO₄ electrolyte, large nanoparticles with two different morphologies, octahedral and cubic shapes, were deposited on the top of the nanotubes. All modified electrodes converted CO₂ in methanol in different quantities, identified by gas chromatograph. However, the NT/TiO₂ modified with CuO/Cu₂O (80:20) nanoparticles using lactic acid as electrolyte showed better performance in the CO₂ reduction to methanol (0.11 mmol L⁻¹) in relation to the other electrodes. In all cases, a blend among the structures and nanoparticle morphologies were achieved and essential to create new site of reactions what improved the use of light irradiation, minimization of charge recombination rate and promoted high selectivity of products.

     

Antibacterial Activity of Pharmaceutical-Grade Rose Bengal: An Application of a Synthetic Dye in Antibacterial Therapies

Rose bengal has been used in the diagnosis of ophthalmic disorders and liver function, and has been studied for the treatment of solid tumor cancers. To date, the antibacterial activity of rose bengal has been sporadically reported; however, these data have been generated with a commercial grade of rose bengal, which contains major uncontrolled impurities generated by the manufacturing process (80–95% dye content). A high-purity form of rose bengal formulation (HP-RBf, >99.5% dye content) kills a battery of Gram-positive bacteria, including drug-resistant strains at low concentrations (0.01–3.13 μg/mL) under fluorescent, LED, and natural light in a few minutes. Significantly, HP-RBf effectively eradicates Gram-positive bacterial biofilms. The frequency that Gram-positive bacteria spontaneously developed resistance to HP-RB is extremely low (less than 1 × 10⁻¹³). Toxicity data obtained through our research programs indicate that HP-RB is feasible as an anti-infective drug for the treatment of skin and soft tissue infections (SSTIs) involving multidrug-resistant (MDR) microbial invasion of the skin, and for eradicating biofilms. This article summarizes the antibacterial activity of pharmaceutical-grade rose bengal, HP-RB, against Gram-positive bacteria, its cytotoxicity against skin cells under illumination conditions, and mechanistic insights into rose bengal’s bactericidal activity under dark conditions.     

Vitamin C and Phenolic Antioxidants of Jua (Ziziphus joazeiro M.) Pulp: A Rich Underexplored Brazilian Source of Ellagic Acid Recovered by Aqueous Ultrasound-Assisted Extraction

Jua (juá in Portuguese) is an underexplored fruit from Brazil’s northeast. This fruit is rich in antioxidant substances. However, there is a dearth of information about jua’s bioactive potential. The present study evaluated two extraction methods (continuous agitation and ultrasound-assisted extraction—UAE) and employed three different solvents (water, ethanol, and acetone) to efficiently recover soluble phenolic compounds. Aqueous extracts obtained by UAE showed the highest total phenolic content (TPC) and antiradical activity. Besides being an eco-friendly procedure, extraction and/or solubility in an aqueous medium is also important for food application. Ellagic acids were the predominant phenolics (80%) found in aqueous jua pulp extract obtained by UAE, as determined by HPLC, while its TPC was 405.8 gallic acid equivalent per gram of fruit. This extract also exhibited a higher scavenging activity towards peroxyl radicals when compared to that of several other fruits from the literature, including grape, strawberry, cranberry, and walnuts, which are known references in terms of antioxidants. This is the first report that demonstrates jua pulp’s potential as an alternative source of ellagic acid and other phenolic acids and flavonoids. Therefore, the outcome of this study provides new information that can be useful for functional food and nutraceutical industries.     

Production and Characterization of β-Glucanase Secreted by the Yeast Kluyveromyces marxianus

An extracellular β-glucanase secreted by Kluyveromyces marxianus was identified for the first time. The optimal conditions for the production of this enzyme were evaluated by response surface methodology. The optimal conditions to produce β-glucanase were a glucose concentration of 4 % (w/v), a pH of 5.5, and an incubation temperature of 35 °C. Response surface methodology was also used to determine the pH and temperature required for the optimal enzymatic activity. The highest enzyme activity was obtained at a pH of 5.5 and a temperature of 55 °C. Furthermore, the enzyme was partially purified and sequenced, and its specificity for different substrates was evaluated. The results suggest that the enzyme is an endo-β-1,3(4)-glucanase. After optimizing the conditions for β-glucanase production, the culture supernatant was found to be effective in digesting the cell wall of the yeast Saccharomyces cerevisiae, showing the great potential of β-glucanase in the biotechnological production of soluble β-glucan.